Hello to everyone!
I got connected to the net with my Fedora core 3 and everything worked well.
After reboot I am unable to use net threw my Fedora/RedHat.
my /etc/wvdial.conf is:
[Modem0]
Modem=/dev/ttyS0
Baud=115200
SetVolume=0
Dial Command = ATDT
init1=ATZ
init2=AT+CRM=1
FlowControl= Hardware (CRTSCTS)
[Dialer tata]
Username= user
Password= password
Phone=#777
Stupid Mode= 1
Inherits = Modem0

which runs following in the root:
[root@linuxrocks]# wvdial xyz
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT+CRM=1
AT+CRM=1
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Fri May 12 10:43:17 2005
--> pid of pppd: 3613
--> Using interface ppp0

Ip addresses are displayed.
With Primary DNS and Secondary DNS Addresses as well

I copied Primary DNS and Secondary DNS address to /etc/resolv.conf
nameserver xxx.xxx.xxx.xxx
nameserver xxx.xxx.xxx.xxx

It worked perfectly till my next reboot .

now i am just stopped at
[root@linuxrocks]# wvdial xyz
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT+CRM=1
AT+CRM=1
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Tue Apr 12 10:43:17 2005
--> pid of pppd: 3613
--> Using interface ppp0
..............................
and it is not giving any response or ip address.


The resolver order in /etc/host.conf file is
order hosts,bind

_________________________________________
Thanks


Linux Rocks

not sure if a minor spelling error is a good enough reson to repost. http://www.linuxquestions.org/questi...hreadid=325215

jkh, mistakes happen, the moderators will get down to it.

--Abid Kazmi

Give us the output of dmesg, or boot-up. Maybe it isn't started up by the rc scripts.

--Abid Kazmi

ddi u check the resolv.conf file after reboot

regards