tftp issue, unable to transfer kernel image using tftp to boot ltsp-client
When trying to boot up a ltsp-client I am receiving the following error:
Loading 192.168.100.44:/lts/vmlinuz-220.127.116.11-ltsp-2....................Unable to load file
I have also seen the error UDP checksum error after the dots.
I have tested the tftp server by connecting to it with a tftp client on another computer and I have been able to successfully transfer that exact file.
What else should I check?
Any input on this would be greatly appreciated.
Without knowing what the 2 clients are, hardware wise, or what processor the vmlinuz file was compiled for, I am guessing.
I have seen the 'Unable to load file' message when attempting to boot an i686 kernel on thin clients/old hardware that is not really i686 compatible, like many Via based thin clients.
If the working client is a Pentium or better PC, and the non-working client is some kind of thin client hardware, you may want to assure the vmlinuz file is compiled for a i386, i486, or i586, but not i686.
|All times are GMT -5. The time now is 04:13 AM.|