Smartlink modem doesn't work under suse 10.0

petertavenier · 04-19-2006, 09:50 AM

hello,

I'm running SUSE 10.0 32-bit

I want to use my modem and the driver is smartlink-somtmodem-2.9.10-18
but is doesn't work

if I use wvdial i get the following:
linux:~#wvdial
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
linux:~#

does anybody know what this means?

thank in advantage.
Peter

pljvaldez · 04-20-2006, 07:56 PM

Did you follow the installation instructions?

petertavenier · 04-21-2006, 02:11 AM

I installed the smartlink-softmodem-2.9.10-18.rpm.
no problems at al.
BUT
when I start up the modem:

Code:

# slmodemd --country=SOUTHAFRICA /dev/tty (/dev/ttySL0 gives error)
Smartlink Soft Modem: version 2.9.10 Sep 28 2005 15:40:20
symbolic link '/dev/ttySL0' -> '/dev/pts/2' created.
modem 'tty' created. TTY is '/dev/pts/2'
Use '/dev/ttySL0' as modem device, Ctrl+C for termination

so this look good i think..

The I start KPPP and set modem device as /dev/ttySL0

when I start dialing I get 'modem ready' then 'modem initializing' then 'no carrier' signal back

when I ask for a Query I get al the ATI information. I can enter the modem with a terminal as wel!
help...

petertavenier · 04-21-2006, 02:15 AM

the login script debug window of KPPP gives

Code:

ATZ
OK
ATQ0 X3 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
ATM1L1
OK
ATDT03002400
NO CARRIER
ERROR

petertavenier · 04-24-2006, 06:22 AM

I bought another modem! I didn't get it working with the SLmodem. gonna try it later today with the Hardmodem.
Thanks anyway..