I am attempting to set up my scanner to work over the network.
the device is a HP5510 Multifunction Printer, I can print over the network without any problems and can scan when it is attached directly to my pc.
when the scanner is installed on the server I can ssh in and type scanimage -L and see the scanner.
my server ip is: 192.168.42.1
my ip is 192.168.42.8
in saned.conf on the server i have:
in net.conf on server and local i have:
in inetd.conf on the server i have:
sane stream tcp nowait saned.saned /usr/local/sbin/tcpd saned
and have tried:
sane stream tcp nowait saned.saned /usr/local/sbin/saned saned
in /etc/services.conf on server & local I have:
sane 6566/tcp saned # SANE network scanner daemon
if i tethereal my interfaces and type scanimage -L from my local machine i get:
zeus:/home/ben# tethereal -i eth1
Capturing on eth1
0.000000 192.168.42.8 -> 192.168.42.1 TCP 32867 > sane [SYN] Seq=0 Ack=0 Win=5840 Len=0 MSS=1460 WS=0
0.004592 192.168.42.1 -> 192.168.42.8 TCP sane > 32867 [SYN, ACK] Seq=0 Ack=1 Win=5840 Len=0 MSS=1460 WS=0
0.004636 192.168.42.8 -> 192.168.42.1 TCP 32867 > sane [ACK] Seq=1 Ack=1 Win=5840 Len=0
0.006762 192.168.42.8 -> 192.168.42.1 TCP 32867 > sane [PSH, ACK] Seq=1 Ack=1 Win=5840 Len=12
0.008373 192.168.42.1 -> 192.168.42.8 TCP sane > 32867 [ACK] Seq=1 Ack=13 Win=5840 Len=0
0.010743 192.168.42.1 -> 192.168.42.8 TCP sane > 32867 [RST, ACK] Seq=1 Ack=13 Win=5840 Len=0
So the machines seem to be talking..
Have I missed something basic?
should this topic be in the software section?