Router Lab unable to get out Linux -- Need help
Howdy Folks,
I currently have this set-up:
Comps -
Linux
Dual PIII 933Mhz
512 DDR ECC
2 NICs
Rh 9
Win
3 Win XP machines
This is how I would like to connect them to the net -
(Net) <---> Linux <---> CISCO 2820 Switch <----> Comps & 3 25XX CISCO Routers
I have Eth 0 set as follows:
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=dhcp
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
PEERDNS=no
/etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
BOOTPROTO=none
ONBOOT=yes
NETMASK=255.255.255.240
TYPE=Ethernet
IPADDR=10.10.1.17
USERCTL=no
PEERDNS=no
The CISCO 2820 is set as Follows -
IP Address: 10.10.1.18
Subnet Mask: 255.55.255.240
Default Gateway: 10.10.1.17
Management VLAN: 1
Domain name:
Name server 1: 0.0.0.0
Name server 2: 0.0.0.0
HTTP server : Enabled
HTTP port : 80
RIP : Enabled
When ever I try to ping from the Linux Box to 10.10.1.17 it pings with "Dest UN reachable." Also, a show of the Mac table on the switch does not bring up any. I am at a loss and any help would be appreciated. Thanks!
JT
P.S: I tried a cross-over cable and that doesn't help at all. I am out of ideas...
|