Redhat - Nic Bonding/Teaming
Hello,
I am currently tasked with teaming two sets of dual nics on a redhat es3 server. I am able to team both ports on the first nic without error, but when I try and create the second team I am unable to bring up the interfaces. The first set of nics are configured as follows: # /etc/sysconfig/network-scripts/ifcfg-eth1 # Intel Corp.|82557/8/9 [Ethernet Pro 100] DEVICE=eth1 USERCTL=no BOOTPROTO=none HWADDR=xx:xx:xx:xx:xx:xx ONBOOT=yes MASTER=bond0 SLAVE=yes TYPE=Ethernet # /etc/sysconfig/network-scripts/ifcfg-eth2 # Intel Corp.|82557/8/9 [Ethernet Pro 100] DEVICE=eth2 BOOTPROTO=none HWADDR=xx:xx:xx:xx:xx:xx USERCTL=no ONBOOT=yes SLAVE=yes MASTER=bond0 TYPE=Ethernet # /etc/sysconfig/network-scripts/ifcfg-bond0 # Intel Corp.|82557/8/9 [Ethernet Pro 100] DEVICE=bond0 USERCTL=no BOOTPROTO=static BROADCAST=xxx.xx.xx.xxx IPADDR=xxx.xx.xx.xx NETMASK=255.255.255.0 NETWORK=xxx.xx.xx.x ONBOOT=yes TYPE=Ethernet I then added the following line to /etc/modules.conf alias bond0 bonding The settings work great as long as I only have the one team. When I try and create a second team using eth3,eth4, and bond1 the interface fails to start. The error received is: bonding device bond1 does not seem be present. Any ideas or help would be greatly appreciated. Thanks, Shawn |
Quote:
|
add the following lines to /etc/modprobe.conf or /etc/module.conf (depending on your distro)
alias bond0 bonding options bond0 miimon=80 mode=1 alias bond1 bonding options bond1 miimon=80 mode=1 |
All times are GMT -5. The time now is 02:17 PM. |