LinuxQuestions.org - [SOLVED] problem in pptp vpn and PPPoE over dial up

- Linux - Networking (http://www.linuxquestions.org/questions/linux-networking-3/)

- - problem in pptp vpn and PPPoE over dial up (http://www.linuxquestions.org/questions/linux-networking-3/problem-in-pptp-vpn-and-pppoe-over-dial-up-870071/)

problem in pptp vpn and PPPoE over dial up

I have an internet connection with dial up created with pppconfig that I use

Code:

#pon connection_name

to connect to internet in my ubuntu 10.10 platform and it creates me a connection over ppp0.
I want to use a PPTP vpn, so I used this command

Code:

#pppd pty "pptp pptp_server_ip --nolaunchpppd --debug" require-mschap-v2 refuse-eap user myusername password mypass noauth persist nodetach debug

it creates me a pptp connection over ppp1. that's why my dialup connection is over ppp0 and vpn connection is over ppp1 I cant't use my vpn connection.
for instance if I run tracepath command, it never gets ppp1 ip adress
Please help me to solve this
regards

But when check my routing table contents before establishing the vpn connection with

Code:

#netstat -rn

command,
it gives me

Code:

Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface

80.191.211.130  0.0.0.0         255.255.255.255 UH        0 0          0 ppp0

0.0.0.0         0.0.0.0         0.0.0.0         U         0 0          0 ppp0

and when I check it after establishing the vpn :

Code:

Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface

my_vpn_ip       0.0.0.0         255.255.255.255 UH        0 0          0 ppp0

80.191.211.130  0.0.0.0         255.255.255.255 UH        0 0          0 ppp0

192.168.10.1    0.0.0.0         255.255.255.255 UH        0 0          0 ppp1

0.0.0.0         0.0.0.0         0.0.0.0         U         0 0          0 ppp0

that my_vpn_ip is the vpn server ip, with this informations it seems it must be work properly, but it don't :confused:

ok I do it myself :) tnx myself!