Linux - NetworkingThis forum is for any issue related to networks or networking.
Routing, network cards, OSI, etc. Anything is fair game.
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Introduction to Linux - A Hands on Guide
This guide was created as an overview of the Linux Operating System, geared toward new users as an exploration tour and getting started guide, with exercises at the end of each chapter.
For more advanced trainees it can be a desktop reference, and a collection of the base knowledge needed to proceed with system and network administration. This book contains many real life examples derived from the author's experience as a Linux system and network administrator, trainer and consultant. They hope these examples will help you to get a better understanding of the Linux system and that you feel encouraged to try out things on your own.
Click Here to receive this Complete Guide absolutely free.
Ive been trying unsuccesfully to setup a vpn connection from home (suse 8.1 behind linksys firewall) to office (running windows 2000 RAS server behind netscreen firewall that had forwarding turned on for RAS requests)
I cannot seem to get the configuration right - wanted to know if anyone had done something like this before
HOME NETWORK - 192.168.2.X
WORK INTERNAL NETWORK - 192.168.1.X
WORK EXTERNAL IP ADDRESS - 22.214.171.124 (number not real number)
LINKSYS FIREWALL ON HOME NETWORK ACTS AS GATEWAY - 192.168.2.1
RAS WINDOWS SERVER ON WORK NETWORKS ACTS AS DHCP/WINS Server - 192.168.1.2
GATEWAY ON WORK NETWORK IS 192.168.1.1 - RUNNING NETSCREEN FIREWALL configured to forward all RAS/PPTP requests to the RAS server.
my challenge is how to use pptp-config setup to define the correct configuration as I have a network translation on the home end and on the remote end.
Below is what I have tried (and has not worked)
dd a NEW PPTP Tunnel.
Which configuration would you like to use?: 1
Tunnel Name: vpn
Server IP: 126.96.36.199
What route(s) would you like to add when the tunnel comes up?
This is usually a route to your internal network behind the PPTP server.
You can use TUNNEL_DEV and DEF_GW as in /etc/pptp.d/ config file
TUNNEL_DEV is replaced by the device of the tunnel interface.
DEF_GW is replaced by the existing default gateway.
The syntax to use is the same as the route(8) command.
Enter a blank line to stop.
route: add -host VPNSERVER gw 192.168.2.1
route: add -net 188.8.131.52 ppp0
**** WHERE DO I ADD THE EXTRA TRANSLATION THAT THE REMOTE WORK FIREWALL IS DOING OF 184.108.40.206 to 192.168.1.X?