Help answer threads with 0 replies.
Go Back > Forums > Linux Forums > Linux - Networking
User Name
Linux - Networking This forum is for any issue related to networks or networking.
Routing, network cards, OSI, etc. Anything is fair game.


  Search this Thread
Old 10-21-2004, 07:06 AM   #1
vampire Janus
LQ Newbie
Registered: Dec 2003
Location: Philippines
Posts: 23

Rep: Reputation: 15
ppp + gprs

Hello all! I need help in configuring ppp to run a gprs enabled cellphone (siemens mc35).

i am using ppp scripts that (i believe are ok already) and after executing pppd, i can ping the ip number of the server but i cannot ping my local dns written in /etc/resolv.conf (which are valid since i am able to connect to the internet now using lan, i execute pppd with lan disabled). in fact, i cannot ping anything more (except my end of the ppp). what could have possibly been wrong in here? below are the output of pppd, ifconfig and route -n.

pppd with eth0 deactivated

If the following ppp negotiations fail,
try restarting the phone.

Serial connection established.
using channel 5
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xc1a0ac3b>]
rcvd [LCP ConfNak id=0x1 <asyncmap 0xa0000>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0xc1a0ac3b>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000> <magic 0xc1a0ac3b>]
rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x30f11e3f> <auth chap MD5>]
sent [LCP ConfRej id=0x3 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x5 <asyncmap 0xa0000> <magic 0x30f11e3f> <auth chap MD5>]
sent [LCP ConfNak id=0x5 <auth pap>]
rcvd [LCP ConfReq id=0x7 <asyncmap 0xa0000> <magic 0x30f11e3f> <auth pap>]
sent [LCP ConfAck id=0x7 <asyncmap 0xa0000> <magic 0x30f11e3f> <auth pap>]
sent [PAP AuthReq id=0x1 user="ASTI" password="password"]
rcvd [PAP AuthAck id=0x1 ""]
PAP authentication succeeded
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <addr>]
rcvd [LCP ProtRej id=0x8 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00]
rcvd [IPCP ConfReq id=0x1 <addr>]
sent [IPCP ConfAck id=0x1 <addr>]
sent [IPCP ConfReq id=0x1 <addr>]
rcvd [IPCP ConfNak id=0x1 <addr>]
sent [IPCP ConfReq id=0x2 <addr>]
rcvd [IPCP ConfAck id=0x2 <addr>]
local IP address
remote IP address
Script /etc/ppp/ip-up started (pid 2637)
Script /etc/ppp/ip-up finished (pid 2637), status = 0x0

lo Link encap:Local Loopback
inet addr: Mask:
inet6 addr: ::1/128 Scope:Host
RX packets:1946 errors:0 dropped:0 overruns:0 frame:0
TX packets:1946 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1911118 (1.8 Mb) TX bytes:1911118 (1.8 Mb)

ppp0 Link encap:Point-to-Point Protocol
inet addr: P-t-P: Mask:
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:30 (30.0 b) TX bytes:52 (52.0 b)

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface UH 0 0 0 ppp0 U 0 0 0 lo UG 0 0 0 ppp0

thanks for everyone =)


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to link linux ppp client to windows ppp server? cyz Linux - Networking 2 12-11-2008 06:01 AM
Looking for man ppp-on and info ppp-on pages. rvijay Linux - General 1 02-26-2005 09:49 PM
WAP and GPRS the_imax General 5 08-25-2004 09:22 AM
GPRS doesn't connect fransemail Linux - Networking 2 04-22-2004 05:48 AM
Gprs wonderpun Slackware 1 09-17-2002 04:55 PM

All times are GMT -5. The time now is 09:33 AM.

Main Menu
Write for LQ is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration