LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Networking (http://www.linuxquestions.org/questions/linux-networking-3/)
-   -   No internet connection in Ubuntu 7.10 (http://www.linuxquestions.org/questions/linux-networking-3/no-internet-connection-in-ubuntu-7-10-a-593523/)

eXeCuTeR 10-21-2007 04:35 PM

No internet connection in Ubuntu 7.10
 
I installed UBUNTU yesterday, and now it doesn't let me get into the internet.
My question is:
W-H-Y-?!

On windows my network works great!

I tried to reset my router and it didn't work.
ifconfig & lspic both work fine.
lspic contains the Ethernet Connection (it goes like: Bridge: NVIDIA ....... Ethernet Connection) and ifconfig contains eth0 and lo.
This makes the situation really weird.
Please help me, I'm exhausted.

Code:

eth0
link encap: Ethernet HW addr 00:04:61:90:38:57
inet addr: 10.0.0.1 Bcast: 10.255.255.255 Mask: 255.0.0.0
inet6 addr: fe80::204:61ff:fe9d:3857/64 scope: Link
UP BROADCAST RUNNING MULTICAST MTU: 1500 METRIC: 1
RX packets: 7 errors: 0 dropped: 0 overruns: 0 frame: 0
TX packets: 39 errors: 0 dropped: 0 overruns: 0 carrier: 0
RX bytes: 1598 (1.5 KB) TX bytes: 5947 (5.8 KB)
interrupt: 16

lo
Link encap: Local Loopback
inet addr: 127.0.0.1 Mask: 255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU: 16436 Metric: 1
RX packets: 0 errors: 0 dropped: 0 overruns: 0 frame: 0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
callisions: 0 txqueeulen: 0
RX bytes: 0 (0.0 b) TX bytes: 0 (0.0 b)

Piece of the data is probably wrong because I typed the info by hand (with a pencil :O).
You'll understand.

BTW,
I got NVIDIA nForce Networking Controller.

PLEASE H-E-L-P ME :(!

eXeCuTeR 10-21-2007 05:28 PM

Please help!! :'(

larkl 10-22-2007 06:03 PM

Is the assigned eth0 IP address (10.0.0.1) appropriate for your network? Doesn't look like a valid class 3 address. Assuming that your router assigns dynamic IP addresses, I would try >dhcpcd eth0 and see if you get a good IP address >ifconfig eth0. Ping 127.0.01 and see if it works (internal loopback). THen try the newly assigned IP. FInally the IP address of the router.


All times are GMT -5. The time now is 10:49 AM.