Thanks for that, sorry to be such a royal pain in the ass.
Ive searched alot for this one, and tried many methods (inclduing editing the modules.conf which disalowed me IP allocation).
So i understand what hotplug is and what its use is (thanks :P) however, /usr/src/linux/ does not contain the .config file? The tree goes as deep as /usr/src/rpm/
Code:
root@james:/usr/src/rpm# ls -al
total 4
drwxr-xr-x 7 root root 168 2003-10-29 17:08 ./
drwxr-xr-x 3 root root 72 2003-10-29 17:08 ../
drwxr-xr-x 2 root root 48 2003-10-29 17:08 BUILD/
drwxr-xr-x 8 root root 192 2003-10-29 17:08 RPMS/
drwxr-xr-x 2 root root 48 2003-10-29 17:08 SOURCES/
drwxr-xr-x 2 root root 48 2003-10-29 17:08 SPECS/
drwxr-xr-x 2 root root 48 2003-10-29 17:08 SRPMS/
What i have done is started hotplug via the konsole
/etc/rc.d/rc.hotplug start
Code:
root@james:/etc/rc.d# ./rc.hotplug status
INPUT status for kernel: Linux 2.4.29 i686
INPUT devices:
/proc/bus/input/devices not available
INPUT handlers:
/proc/bus/input/handlers not available
PCI Status for kernel: Linux 2.4.29 i686
PCI up; bus count is 2
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645 Host & Memory & AGP Controller (rev 02)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) (rev 10)
00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
00:0a.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
00:0b.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 50)
00:0b.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 50)
00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
00:0d.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)
USB Status for kernel: Linux 2.4.29 i686
USB up; bus count is 5
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=e0df5000
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=e0df3000
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
P: Vendor=0c45 ProdID=1050 Rev= 1.10
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=e000
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=dc00
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.29 ehci_hcd
S: Product=VIA Technologies, Inc. USB 2.0
S: SerialNumber=00:0b.2
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
USB Drivers Loaded:
usbdevfs
hub
usb-storage
khubd/hotplug thread:
F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY TIME CMD
1 S 0 627 1 0 69 0 - 0 ? ? 00:00:00 khubd
Module Size Used by Not tainted
usb-storage 62336 0 (unused)
usb-ohci 19368 0 (unused)
snd-intel8x0 18080 0 (unused)
snd-ac97-codec 52472 0 [snd-intel8x0]
snd-pcm 54504 0 [snd-intel8x0 snd-ac97-codec]
snd-timer 13412 0 [snd-pcm]
snd 31268 0 [snd-intel8x0 snd-ac97-codec snd-pcm snd-timer]
snd-page-alloc 4712 0 [snd-intel8x0 snd-pcm snd-timer snd]
uhci 24284 0 (unused)
ehci-hcd 17516 0 (unused)
usbcore 58860 1 [usb-storage usb-ohci uhci ehci-hcd]
soundcore 3396 0 (autoclean) [snd]
pcmcia_core 39172 0
ntfs 51232 2 (autoclean)
ide-scsi 9392 0
8139too 13928 1
mii 2272 0 [8139too]
crc32 2880 0 [8139too]
agpgart 45092 0 (unused)
As you can see, the sound is loaded (i think) and is also echoed by lsmod.
However, when i played a music file through Kaboodle i couldnt hear anything.
Also, just to be annoying and save making another thread, how do i enable the scroll on my mouse? I modified /etc/X11/xorg.conf with the following, but im still not scrolling
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"