Heres my setup... i have a cisco pix 501 firewall, no problems with that, i have a personal PC (aiwa) and a server (trance) that are connected at 100mbit to a switch on the firewall... and i have a 1gbps direct crossover cable between trance and aiwa for transfers and storage and such. Aiwa is 10.10.10.1 and trance is 10.10.10.2. Heres the problem... in the windows pc (aiwa) the link registers at 1gbps, but if I look at mrtg for the server the link only shows up at 100mbps max.... the pc registers 1000. Examples...
... showing 100MBit
... showing 1000Mbit
Any ideas as to where and what is showing the 100mbit? The snmp version is net-snmp-5.2...
Heres the lspci output...
00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
00:08.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0a.0 Unknown mass storage controller: Promise Technology, Inc. 20267 (rev 02)
00:0b.0 VGA compatible controller: Trident Microsystems TGUI 9660/938x/968x (rev d3)
lsmod also shows...
Module Size Used by Not tainted
uhci 24444 0 (unused)
usbcore 59308 1 [uhci]
e1000 65572 1
8139too 14376 1
mii 2272 0 [8139too]
crc32 2880 0 [8139too]
ide-scsi 9328 0
agpgart 43940 0 (unused)