Minicom not working I connected linux machines back-to-back
I have connected a serial cable back-to-back from a FC-12 machine to FC-6 machine.
FC-12 (linux-18.104.22.168) host and FC-6(linux-22.214.171.124) target
FC-6 : minicom-2.1-3.i386.rpm
FC-12 : minicom-2.3-8.fc12.i686.rpm
Kernel command line in the grub.conf on the target is
kernel /vmlinuz-126.96.36.199 ro root=/dev/VolGroup00/LogVol00 rhgb
On the host side my minirc.fc12 is
pu port /dev/ttyS0
pu baudrate 38400
pu bits 8
pu parity N
pu stopbits 1
pu rtscts Yes
When I boot my target, I am not seeing logs on the minicom terminal. Though, I am able to see the boot messages on the Windows
hyper-terminal when I connect the target to Windows machine
I have toggled with hardware flow control, but in vain.
Can anyone help me to resolve this.
Is the host setup as a dual boot PC?
From what you posted one might assume that the FC12 and windows PCs are not the same. Are you using the same cable?
What I meant was. When I connected the same target to another host machine with Windows XP. I could see the logs on the hyperterminal.
Yes, I am using the same cable
|All times are GMT -5. The time now is 04:47 PM.|