LinuxQuestions.org - laptop wireless won't connect in KDE but works in Gnome (Fedora 13)

- Linux - Networking (https://www.linuxquestions.org/questions/linux-networking-3/)

- - laptop wireless won't connect in KDE but works in Gnome (Fedora 13) (https://www.linuxquestions.org/questions/linux-networking-3/laptop-wireless-wont-connect-in-kde-but-works-in-gnome-fedora-13-a-816738/)

laptop wireless won't connect in KDE but works in Gnome (Fedora 13)

After searching/googling for information related to the topic, I haven't been able to get this working in KDE.

Background: I have a Dell Studio 1745 with builtin Intel 5100bg wireless card. It connects to my Linksys WRT54G router just fine in openSUSE 11.2 & 11.3 using either KDE or Gnome. In Fedora 13 it only connects under Gnome, not KDE. Those are using NetworkManager. Using traditional ifup only works in Fedora under Gnome, i.e. nothing works under KDE in Fedora.

Specs: lspci

Code:

08:00.0 Network controller: Intel Corporation WiFi Link 5100

14:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01)

14:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01)

14:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01)

20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

lsmod

Code:

nf_nat                19059  2 ipt_MASQUERADE,iptable_nat

stp                    1887  1 bridge

llc                    4557  2 bridge,stp

ip6t_REJECT            4055  6 

nf_conntrack_ipv6      17513  14 

ip6table_filter        2743  1 

ip6_tables            16558  1 ip6table_filter

ipv6                  267065  32 ip6t_REJECT,nf_conntrack_ipv6

iwlcore              220675  1 iwlagn

mii                    4142  1 r8169

mac80211              196945  2 iwlagn,iwlcore

cfg80211              117099  3 iwlagn,iwlcore,mac80211

dmesg | grep iwlagn

Code:

iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33.3-85.fc13.x86_64-kds

iwlagn: Copyright(c) 2003-2009 Intel Corporation

iwlagn 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

iwlagn 0000:08:00.0: setting latency timer to 64

iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54

iwlagn 0000:08:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels

  alloc irq_desc for 33 on node -1

  alloc kstat_irqs on node -1

iwlagn 0000:08:00.0: irq 33 for MSI/MSI-X

iwlagn 0000:08:00.0: firmware: requesting iwlwifi-5000-2.ucode

iwlagn 0000:08:00.0: loaded firmware version 8.24.2.12

CONTENTS OF /etc/sysconfig/network-scripts/ifcfg-wlan0:

Code:

# Intel Corporation WiFi Link 5100

DEVICE=wlan0

HWADDR=##:##:##:##:##:##

ONBOOT=yes

BOOTPROTO=dhcp

TYPE=Wireless

NM_CONTROLLED=no

USERCTL=no

PEERDNS=yes

IPV6INIT=no

ESSID=XXXXXXXXXXX

MODE=Managed

RATE=auto

CHANNEL=

Error message from ifup wlan0:

Code:

Error org.freedesktop.NetworkManagerSettings.InternalError: unable to get the connection D-Bus path

Error org.freedesktop.NetworkManagerSettings.InternalError: unable to get the connection D-Bus path

Error for wireless request "Set Encode" (8B2A) :

    SET failed on device wlan0 ; Invalid argument.

Determining IP information for wlan0... failed; no link present.  Check cable?

Steps taken so far:

1) completely deleted NetworkManager (and depends) with yum remove.

2) Removed all wireless related files in /etc/sysconfig/.

3) Re-installed wireless network in System > Admin > Network

No matter what I have done, the wireless refuses to work in KDE on Fedora. I've temporarily resorted to having my wife string a 50ft patch cord from the router in the basement to my laptop (I'm disabled, can't climb stairs).

Does anyone have a suggestion of what else I might try?

Thanks, Tom

Since the wired network works, it may be that the network manager is the problem. When you reinstalled the network manager, did you reinstall the Gnome network manager?

If so, I can say I have found it to be unreliable except under the Gnome interface. For what it's worth, here's my experience.

I have a netbook running Ubuntu 8.04 (factory installed Ubuntu that does not automatically update versions--maybe it's a netbook thing; it works and I'm not going to mess with it). The Gnome network manager will connect to my wireless when I start the computer (from a restart or powered off condition) in Gnome, but not when I start it in Fluxbox. If I start it in Fluxbox, the Gnome network manager icon just rotates making pretty circles.

If I start it, go into Gnome, make the network connection, leave Gnome, then start Fluxbox, the connection works fine until I actually reboot or power off (I did an "uptime" before I powered it off the last time--it had been up for over 9 days, during which time I had commmonly logged out over-night.

In contrast, I have a laptop running Ubuntu current (it started with factory installed 8.04 but has lived through all the version updates). Early on, I replaced Gnome network manager with wicd. That box connects flawlessly to any wireless network, regardless of the window manager I use after powering up or rebooting.

In my experience, Gnome network manager does not play well with anything but Gnome on boot. YMMV.

Thanks for the reply, Frankbell;

Quote:

Originally Posted by frankbell (Post 4017771)

Since the wired network works, it may be that the network manager is the problem. When you reinstalled the network manager, did you reinstall the Gnome network manager?

As stated in my original post, I did NOT reinstall NetworkManager.

Quote:

If so, I can say I have found it to be unreliable except under the Gnome interface. For what it's worth, here's my experience.

I have a netbook running Ubuntu 8.04 (factory installed Ubuntu that does not automatically update versions--maybe it's a netbook thing; it works and I'm not going to mess with it). The Gnome network manager will connect to my wireless when I start the computer (from a restart or powered off condition) in Gnome, but not when I start it in Fluxbox. If I start it in Fluxbox, the Gnome network manager icon just rotates making pretty circles.

If I start it, go into Gnome, make the network connection, leave Gnome, then start Fluxbox, the connection works fine until I actually reboot or power off (I did an "uptime" before I powered it off the last time--it had been up for over 9 days, during which time I had commmonly logged out over-night.

In contrast, I have a laptop running Ubuntu current (it started with factory installed 8.04 but has lived through all the version updates). Early on, I replaced Gnome network manager with wicd. That box connects flawlessly to any wireless network, regardless of the window manager I use after powering up or rebooting.

In my experience, Gnome network manager does not play well with anything but Gnome on boot. YMMV.

I'll have to give that a try if wicd (which I'll download tonight) doesn't work. Right now I've been able to get wired eth0 working by ifup method which it wasn't doing in KDE previously under F13. Oh, and I also re-installed F13 from DVD without NetworkManager.

Thanks, Tom

I kicked myself this afternoon for not suggesting another possible test would be to try connecting by editing the wireless configuration file. It's not an ideal way for day-to-day use--something like wicd or some other network manager frontend is a lot easier to work with, but it might be a good test.

In Slackware, it's /etc/rc.d/rc.wireless. But, frankly, I don't know whether Fedora has an rc.wireless or equivalent--a search was not very comforting; my Ubuntu machine appears not to have one.

Here's a link I found. I'm not promising it will help, but it might be a http://beginlinux.com/appsm/wireless...wireless-setupstarting point.

Good luck.

Hi,
I would suggest to disable wpa supplicant and you use only Network Manager here the link setup wifi for CentOS , it is same family.

http://wiki.centos.org/HowTos/Laptop...899390b41a5c4c

Enjoy.

I had the same problem. I installed wlassistant while in Gnome (which does get Internet when KDE doesn't) After that, I restarted in KDE and ran wlassistant. My hidden WPA-Personal network showed up and I got on. Weirdly enough, it let me configure the wireless but not use it.

The solution has been posted elsewhere in LQ, but is worth repeating.

Quote:

Originally Posted by mdlinuxwolf (Post 4173151)

The solution has been posted elsewhere in LQ, but is worth repeating.

Would you mind posting a link?

Thanks, OP, for starting an interesting discussion -- I'm hoping for insight in getting wifi working on my MEPIS 8.0 (KDE 3.5.12) secondary install on my Eee PC 8G.

Quote:

Originally Posted by archtoad6 (Post 4173528)

Would you mind posting a link?

Thanks, OP, for starting an interesting discussion -- I'm hoping for insight in getting wifi working on my MEPIS 8.0 (KDE 3.5.12) secondary install on my Eee PC 8G.

Actually, the solution is pretty simple. Using Gnome Xfce or whatever other desktop does get wireless, install wlassistant. I used yum, but there is no reason why yumex or kpackagekit wouldn't also work. If there is no wireless to be had, then use a wired connection, somewhere you can get Ethernet or a wireless Ethernet bridge (WET-54g)

Configure your connection like normal using KDE's tools. The tools will allow you to set up the connection, just not activate it. Wlassistant did allow me to get online in KDE. Of course, the other solution is to just give up and use Xfce or Gnome instead.

------------

Mepis...

After you install Mepis, try to restart the machine and run synaptic for updates. You may have to use wired Ethernet for the first update, another words plugging your netbook directly into your modem or router. Run updates for everything. Then use Synaptic to search for a wireless driver for your NIC, if it hasn't already done so itself. Of course, using a Wireless Ethernet bridge on an open network will also work.