Dear All,

I configure the Internet Connection Sharing in the Mandrake Control Center then when I finished it...I restart the PC then i found this kind of error appears to my screen (Undefined zone in rule "Redirect masq 3128 tcp www")

I have two Lan card installed in my computer
The eth0 is already connected to the Internet Connections
and the second Lan card eth1 is connected to the Local Network.


Please help me this error I've encountered....



Thanks


Electron

i also had problems with NAT/ICS ... well that was till i found this ever since connection sharing has been a breeze on mdk... couldnt get it to work with SuSE tho... maybe its just me..

hope it helps..

Dear Librano

I have eth0 and its already connected to the internet connection and I'm using DSL COnnection
but i have two installed lan card in my computer eth0 and eth1. the eth0 is already configured but the eth1 in not configure yet.

The first Lan card would be connected to the DSL Modem
and the second Lan Card would be connected to the Local network.


so what about the IP address for the client , what kind of IP address is it 192.168.1.1?



Is this correct:


ISP <---------> PC with two lan card (eth0 is connected to the internet and the eth1 is connected to the HUB)-----------------> HUB -------- Client PC.



Thanks



Electron

Librano



Thank you very much for giving me a link.

And right now My Internet connections sharing is running it works....


One questions ?

I follow the instruction the one you give me a link
before I create the script I already setup the Internet Connections Sharing from the MANDRAKE CONTROL CENTER....

Do you think no need to setup the Internet Connections Sharing from the MAndrake Control CEnter. Only the Script the one you give me a link.



Thanks



Electron

i was happy when mdk 10 came with internet connection sharing in the control centre... but sadly it didnt work... my setup is..

---------------My PC-----------------
ISP----> [eth0---->eth1]------>client

i dont have a router etc... how i did it was configure with mandrake control centre and then add those scripts after... i have done it a few times and it works everytime...

about the client IP... My PC is set as 192.168.1.1 ... and the client as 192.168.1.2 ... subnet mask is 255.255.255.0 and for gateway and DNS follow the instructions on the site...

Dear Librano,


Thanks,



The same in my setup.

ISP ------> eth0 -----> eth1 ------> Client


But I have encountered when I setup the Internet connections Sharing from mandrake control center.

Hers my problem : undefined client zone in rule "redirect masq 3128 tcp www"
Did you encountered this problem?




Thanks


Electron