LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Networking (http://www.linuxquestions.org/questions/linux-networking-3/)
-   -   Inbound traffic for port 80 (http://www.linuxquestions.org/questions/linux-networking-3/inbound-traffic-for-port-80-a-62501/)

Gerardoj 05-29-2003 12:17 PM

Inbound traffic for port 80
 
Hey everyone!! :cool:

I have cable connection and my ISP may block port 80 so I
use port forwarding which I have set for port 8080. I would like to know if my Apache are running on port 8080.? :scratch: and
I using Cisco Soho 77 router and I would like to know how can I configure my router to route all inbound traffic for port 80 and 8080 from my router to my computer. :confused:

Thanks

:Pengy:

-----------Gerardo

markus1982 05-29-2003 12:25 PM

i can't help you with your cisco router stuff, however to find out what services are listening on which port you can do a netstat -l

rhstudent 05-29-2003 03:20 PM

which IOS is running on your router?
It sounds like you need to do network address translation (NAT) with the router.

RH

Proud 05-29-2003 03:25 PM

If your ISP blocks port 80, you'll never get requests reach your router to be forwarded to 8080.

Gerardoj 05-29-2003 03:26 PM

Hey sorry but I newbie!!

What did you mean with IOS?

Thanks

rhstudent 05-29-2003 04:59 PM

Cisco calls their router operating system the Internetwork Operating System (IOS)
current versions which support NAT are 11.3 (I think) to what ever is the newest version.
I have a Cisco 2611 running IOS 12.3 at home.

I am using NAT to redirect incomming web traffic to my web server.

If your ISP is blocking incomming web traffic(port 80) your not going to be able to redirect anything because it's never going to get to your router. Are you sure they are blocking incomming traffic on port 80?

Gerardoj 05-29-2003 05:04 PM

Incomming web traffic
 
:Pengy:

Im not 100% that my ISP block incomming web traffic, if ISP block my incomming web traffic what can I do? and if not block 80 port waht can I do?

Thanks

------------Gerardo :confused:

Gerardoj 05-29-2003 05:08 PM

I tried to type in URL 10.10.10.1 to bring up the web page of router but nothing happened, when the technical Support of ISP came to install the router they programmed in Windows Terminal!! Do I need to pragram in Windows Terminal?

Thanks

-----Gerardo

manthram 05-29-2003 05:10 PM

if your ISP is blocking port 80 then you will have to look for a service which forwards all your port 80 requests to whatever port you want your web server to run on. you can't do it on your computer, because the traffic wont reach you if your iSP is blocking it. there are lot of port forwarding service available, do a google search and you will find some free ones too.

Gerardoj 05-29-2003 05:20 PM

Hi again one question?

I have the DNS service with www.dynu.com in the "Dynu Dynamic Basic" I have the option of Port Forwarding, the question is, do I need to look for a service which forwards all my port 80 requests to whatever port I want web server to run on or is just the Dynu Dynamic Basic DNS?

Thanks

-----Gerardo

manthram 05-29-2003 05:27 PM

you can use your dynamic dns service providers port forwarding. it will not ask for which port to forward. when you enable this service, it means that when ever you type your domain name it defaults to that port. so all you have to do is enable port forwarding and then tell your web server to listen on that port


All times are GMT -5. The time now is 06:36 AM.