How to add more than one IP range in squid.conf ?

gardenair · 03-03-2011, 02:49 AM

I am going to configure squid in my linux box.I have different kinds of ranges in my office.The default is as under

Code:

acl our_networks src 192.168.1.0/24 192.168.2.0/24
http_access allow our_networks

can I add my own ranges as

Code:

acl our_networks src 10.1.60.0/24 10.1.70.0/24 10.0.80.0/24 10.1.90.0/24 10.1.100.0./24
http_access allow our_networks

we have divided according to floors ,like 1st floor ip range is 10.1.60.0 2nd floor 10.1.70.0 ,third 10.1.80.0 and so on. All IP ping each others successfully.I only need help is it the correct way to add ranges in squid which i do ?
need guidance
garden

win32sux · 03-03-2011, 03:33 AM

Yeah, that should work fine (assuming you don't need the granularity provided by using separate ACLs for each floor). You're only likely to run into issues if you use complicated netmasks.

gardenair · 03-03-2011, 11:06 AM

Thanks for the reply.well i have configured squid with minimum configuration.internet works on the system but the client machine does not show any browsing.yes it ping with the proxy server.
I am fail to know why the clients not show any browsing,even in the IE i gave proxy server ip and port as 8080.
Kindly guide me how can i fix my issue?

win32sux · 03-04-2011, 05:43 AM

What does the Squid access log show?