d-link dwa 525
Hi. I have dwa 525 pci wifi adapter on my pc with debian squeeze installed. Found many in the internet for setting up access point with hostap, but not worked. Please help, maybe driver for 525 does not support ap or something else. Driver is from ralinktech.com (RT3062PCI/mPCI/CB/PCIe(RT3060/RT3062/RT3562/RT3592)).
OK. It seems nobody has answer. I ended up with adhoc+wep (just iwconfig) configuration. But now another problem arised. My laptop with ubuntu sees pc (debians) essid, connects to it and everything is working. But after restarting my ubuntu it connects but does not work, i.e. ping fails. i issue iwconfig wlan0 and it gives that wlan0 is connected to my pc (cell: pc's mac). but not working. please help.
ps: with windows everything is ok.
Please, can anybody help?
Do you ping on IP or name?
Please post the output from
thanks for reply.
i ping ip address.
lo no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
ra0 Ralink STA ESSID:"adhocwifi" Nickname:"RT3562STA"
Mode:Ad-Hoc Frequency=2.412 GHz Cell: 2E:4E:30:27:A8:97
Bit Rate=24 Mb/s
RTS thr:off Fragment thr:off
Link Quality=25/100 Signal level:-77 dBm Noise level:-87 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 ra0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
|All times are GMT -5. The time now is 06:28 PM.|