LinuxQuestions.org - Configuring Debian as ipses vpn server

- Linux - Networking (https://www.linuxquestions.org/questions/linux-networking-3/)

- - Configuring Debian as ipses vpn server (https://www.linuxquestions.org/questions/linux-networking-3/configuring-debian-as-ipses-vpn-server-4175443663/)

Configuring Debian as ipses vpn server

In The Name of Allah

Hello ;
I have used this guide in this topic to config debian server as ipsec server ,
I just want use server az vpn proxy server , not i a vpn server in LAN with chap authentication ..so i have done steps 1,2 and 3 .
hence my client has dynamic IP ,so some parts should be changed but i dunno how ?

1 - In step 1 , we have this line in file /etc/xl2tpd/xl2tpd.conf :

Code:

virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!192.168.1.0/24

Should i replace 192.168.1.0 with client dynamic IP ?

2-In step 3 , we have these lines in file /etc/xl2tpd/xl2tpd.conf

Code:

[lns default]

ip range = 192.168.1.10-192.168.1.20

local ip = 192.168.1.1

Should i replace 192.168.1.1 and ip range with client dynamic IP ?

Regards dehqan

Quote:

Originally Posted by a.dehqan (Post 4860505)

Hello ;
I have used this guide in this topic to config debian server as ipsec server, I just want use server az vpn proxy server , not i a vpn server in LAN with chap authentication ..so i have done steps 1,2 and 3. hence my client has dynamic IP ,so some parts should be changed but i dunno how ?

Which guide did you follow? The original link is very old, and the updated one it points to (for Ubuntu 10), is also old. There is an updated doc at the Debian wiki...did you try it?
http://wiki.debian.org/IPsec
https://wiki.archlinux.org/index.php...N_client_setup

Quote:

1 - In step 1 , we have this line in file /etc/xl2tpd/xl2tpd.conf :

Code:

virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!192.168.1.0/24

Should i replace 192.168.1.0 with client dynamic IP ?

No, since that would then disallow that subnet, as it says in the documentation. That is defining the network range of addresses for incoming clients.

Quote:

2-In step 3 , we have these lines in file /etc/xl2tpd/xl2tpd.conf

Code:

[lns default]

ip range = 192.168.1.10-192.168.1.20

local ip = 192.168.1.1

Should i replace 192.168.1.1 and ip range with client dynamic IP ?

No, please re-read the documentation. The IP range is the range of addresses that is given to the clients...the documentation says that very clearly. The local IP address. There is even a man page for that file...have you consulted it?
http://linux.die.net/man/5/xl2tpd.conf

It explains what each field does.

Hello ;

Thanks for your attention;
I checked both guides there is no differences except openswan versions ... that it does not matter for me that i'm installing openswan from debian repositories on debian.

There is a Debian VPS server that i want use it as VPN server to bypass filtering so this works as a proxy server ,not a local vpn server ,
That ubuntu guide that i used is configuring a local vpn server in a local network , so 1 - i don't need all steps , so i just done steps 1,2,3 for my aim and i just edited server IP , and have changed ipsec.conf for chap authentication :
require chap=yes

Then i have restarted ipsec and x2lptd daemons on server and hve created a vpn connection on windows 7(a client on the internet) with username and password ...
but it does not connect and gives error
i checked server auth.log that is like this http://hpaste.org/80026

How to fix the problem ?

Quote:

Originally Posted by a.dehqan (Post 4861079)

Hello ;
I checked both guides there is no differences except openswan versions ... that it does not matter for me that i'm installing openswan from debian repositories on debian.

There is a Debian VPS server that i want use it as VPN server to bypass filtering so this works as a proxy server ,not a local vpn server ,
That ubuntu guide that i used is configuring a local vpn server in a local network , so 1 - i don't need all steps , so i just done steps 1,2,3 for my aim and i just edited server IP , and have changed ipsec.conf for chap authentication :
require chap=yes

Then i have restarted ipsec and x2lptd daemons on server and hve created a vpn connection on windows 7(a client on the internet) with username and password ...
but it does not connect and gives error
i checked server auth.log that is like this http://hpaste.org/80026

How to fix the problem ?

You fix it by following the instructions. You can't pick and choose which steps to follow. Also, since you're asking about how to bypass filtering (what KIND of filtering you don't say), that's against the LQ Rules. Aside from the legal issues, you do realize that if you're caught at your job, you could get fired, right?

And did you try to look this error up?
https://lists.openswan.org/pipermail...il/020337.html

Evading filtering could be harmful to your company, and as such is in violation of the LQ rules.
http://www.linuxquestions.org/linux/rules.html

This thread is closed.