I'm using Ubuntu 11.04. I'm trying to get a Cisco Valet Connector AM10 to work. It's one of those ZeroCD USB devices that is both storage and modem.
Using this link:
http://linuxwireless.org/en/users/Dr...ght=%28am10%29
I filled out usb_modeswitch like this:
Code:
# Configuration for the usb_modeswitch package, a mode switching tool for
# USB devices providing multiple states or modes
#
# This file is evaluated by the wrapper script "usb_modeswitch_dispatcher"
# in /usr/sbin
# To enable an option, set it to "1", "yes" or "true" (case doesn't matter)
# Everything else counts as "disable"
# Disable automatic mode switching globally (e.g. to access the original
# install storage)
DisableSwitching=0
# Enable logging (results in a extensive report file in /var/log, named
# "usb_modeswitch_<interface-name>" (and probably others)
EnableLogging=0
# DAS edit 2011-07-20
# Cisco Valet Connector AM10
#
# Contributor: ohmysql (quite the n00b so please help if you see errors)
# No. 1
DefaultVendor= 0x1307
DefaultProduct= 0x0169
TargetVendor= 0x13b1
TargetProduct= 0x0031
#MessageEndpoint=0×01
MessageContent="5553424312345678c00000008000069f030000000000000000000000000000"
And here's what I get when I run:
Code:
sudo usb_modeswitch -c /etc/usb_modeswitch.conf
Quote:
Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found devices in default mode, class or configuration (1)
Accessing device 006 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Error: message endpoint not given or found. Aborting.
|
HELP!
