I have a CentOS 7 VM that has two IPs. I only want one IP and can only find one configured. Can you please help me understand what I am missing?
Code:
[mdittmer@ops2 ~]$ sudo cat /etc/sysconfig/network-scripts/ifcfg-eno16777984
TYPE=Ethernet
BOOTPROTO=dhcp
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME="LAN NIC"
UUID=ba477e78-0d97-4430-8cf2-68c04c089cd6
DEVICE=eno16777984
ONBOOT=yes
DNS1=192.168.100.15
IPADDR=192.168.100.52
PREFIX=24
GATEWAY=192.168.100.1
PEERDNS=yes
PEERROUTES=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
[mdittmer@ops2 ~]$
[mdittmer@ops2 ~]$
[mdittmer@ops2 ~]$
[mdittmer@ops2 ~]$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno16777984: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:0c:29:01:01:c9 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.170/24 brd 192.168.100.255 scope global dynamic eno16777984
valid_lft 388004sec preferred_lft 388004sec
inet 192.168.100.52/24 brd 192.168.100.255 scope global secondary eno16777984
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe01:1c9/64 scope link
valid_lft forever preferred_lft forever
