Hi all,

while compiling the driver I am getting the following error, anybody have a solution?

# make install
make -C /lib/modules/2.6.27/build SUBDIRS=/usr/src/atl2/src modules
make[1]: Entering directory `/usr/src/kernels/linux-2.6.27'
CC [M] /usr/src/atl2/src/at_main.o
/usr/src/atl2/src/at_main.c: In function ‘at_probe’:
/usr/src/atl2/src/at_main.c:326: error: implicit declaration of function ‘SET_MODULE_OWNER’
/usr/src/atl2/src/at_main.c: In function ‘at_vlan_rx_kill_vid’:
/usr/src/atl2/src/at_main.c:1488: error: ‘struct vlan_group’ has no member named ‘vlan_devices’
/usr/src/atl2/src/at_main.c: In function ‘at_restore_vlan’:
/usr/src/atl2/src/at_main.c:1507: error: ‘struct vlan_group’ has no member named ‘vlan_devices’
/usr/src/atl2/src/at_main.c: In function ‘at_intr_rx’:
/usr/src/atl2/src/at_main.c:2163: error: implicit declaration of function ‘eth_copy_and_sum’
make[2]: *** [/usr/src/atl2/src/at_main.o] Error 1
make[1]: *** [_module_/usr/src/atl2/src] Error 2
make[1]: Leaving directory `/usr/src/kernels/linux-2.6.27'
make: *** [default] Error 2

lspci -v displays the following:

Ethernet controller: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter (rev a0)
Subsystem: ASUSTeK Computer Inc. Unknown device 8233
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at dffc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at dffa0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [58] Express Endpoint IRQ 0
thanks in advance
manoharan

Four questions:

1. Are you building the driver against a 32-bit or a 64-bit kernel?

2. What version of the atl2 driver are you trying to build?

3. Did you get the driver from a CD that came with the motherboard, or from somewhere else?

4. Do you need a 2.6.27 kernel for some particular reason, or will the standard 2.6.18 version that ships with Centos 5.2 work for you?

1. The processor is Core 2 Duo E7300
2. atl2-2.0.4 as the driver supplied in the CD (l2-linux-v1.0.40.4) failed to compile
3. I have downloaded the driver from redhat site
4. I have found that kernel 2.6.23 and above have support for this NIC

thanks
manoharan

If you're willing to stay with the default Centos 5.2 kernel, I've built some kmod rpms for the driver. You can find one appropriate for your kernel at:

ftp://ftp.hogchain.net/pub/linux/att...atl2/centos5.2

Dear jcliburn,

Thank you very much for the help. Now the card is detected automatically.

manoharan