LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Linux Mint
User Name
Password
Linux Mint This forum is for the discussion of Linux Mint.

Notices

Reply
 
LinkBack Search this Thread
Old 10-19-2012, 10:30 AM   #1
golightly
LQ Newbie
 
Registered: Oct 2012
Posts: 13

Rep: Reputation: Disabled
Mint 13 Installation grub error


Although I've installed Mint 13 on sde it won't boot, error: file not found, so I ran the bootinfoscript but need some guidance analysing it and determining the appropriate actions. If I could also run Mandriva from sdc, that would be good also. I would appreciate any help.
golightly
Boot Info Script 0.61 [1 April 2012]


============================= Boot Info Summary: ===============================

=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:

---------------------------------------------------------------------------
search.fs_uuid 79369164-c13d-415e-910e-41ae7727cb6b root
set prefix=($root)/boot/grub
---------------------------------------------------------------------------
-----.
=> Windows is installed in the MBR of /dev/sdb.
=> Grub Legacy (v0.97) is installed in the MBR of /dev/sdc and looks on the
same drive in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdd and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub on this drive.
=> Grub2 (v1.99) is installed in the MBR of /dev/sde and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.

sda1: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM

sdb1: __________________________________________________________________________

File system: vfat
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:

sdc1: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Mandriva Linux release 2010.2
(Official) for i586 Kernel 3.3.8-desktop586-2.mga2 on
an i686 /
Boot files: /boot/grub/menu.lst /etc/fstab

sdc2: __________________________________________________________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sdc5: __________________________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

sdc6: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 11 Katya
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdc7: __________________________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

sdd1: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:

sdd2: __________________________________________________________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sdd5: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 11 Katya
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdd6: __________________________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

sde1: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 13 Maya
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sde2: __________________________________________________________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sde5: __________________________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

============================ Drive/Partition Info: =============================
 
Old 10-19-2012, 10:49 AM   #2
yancek
Senior Member
 
Registered: Apr 2008
Distribution: PCLinux, Ubuntu, Slackware
Posts: 4,151

Rep: Reputation: 625Reputation: 625Reputation: 625Reputation: 625Reputation: 625Reputation: 625
Your bootinfoscript output (which you posted) is incomplete. Generally, boot menus such as grub.cfg and fstab files as well as UUID info is included. If you set sde as first boot priority, it might work as you have Grub installed in the mbr of that drive, the drive on which you indicate you have installed Mint. Either post all the results.txt output or run the script again.
 
Old 10-19-2012, 10:35 PM   #3
golightly
LQ Newbie
 
Registered: Oct 2012
Posts: 13

Original Poster
Rep: Reputation: Disabled
Setting sde as first priority boot results in 'error:file not found'
I didn't include all of the Results.txt due to limited word count on the post, so I'll include the rest of it in this and subsequent replies.

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 * 63 312,576,704 312,576,642 7 NTFS / exFAT / HPFS


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 41.1 GB, 41110142976 bytes
240 heads, 63 sectors/track, 5310 cylinders, total 80293248 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sdb1 * 63 80,287,199 80,287,137 c W95 FAT32 (LBA)


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sdc1 * 63 25,189,919 25,189,857 83 Linux
/dev/sdc2 25,189,981 976,771,071 951,581,091 5 Extended
/dev/sdc5 25,189,983 33,367,004 8,177,022 82 Linux swap / Solaris
/dev/sdc6 33,368,064 970,481,663 937,113,600 83 Linux
/dev/sdc7 970,483,712 976,771,071 6,287,360 82 Linux swap / Solaris


Drive: sdd _____________________________________________________________________

Disk /dev/sdd: 360.1 GB, 360080695296 bytes
255 heads, 63 sectors/track, 43777 cylinders, total 703282608 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sdd1 * 63 413,191,799 413,191,737 7 NTFS / exFAT / HPFS
/dev/sdd2 413,192,190 703,281,151 290,088,962 5 Extended
/dev/sdd5 413,192,192 696,991,743 283,799,552 83 Linux
/dev/sdd6 696,993,792 703,281,151 6,287,360 82 Linux swap / Solaris


Drive: sde _____________________________________________________________________

Disk /dev/sde: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sde1 * 2,048 970,481,663 970,479,616 83 Linux
/dev/sde2 970,483,710 976,771,071 6,287,362 5 Extended
/dev/sde5 970,483,712 976,771,071 6,287,360 82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device UUID TYPE LABEL

/dev/sda1 46A0E334A0E3295F ntfs WINDOWSP
/dev/sdb1 49E0-A9F8 vfat REAPER
/dev/sdc1 b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 ext4
/dev/sdc5 947da4ea-ede1-4cfa-b706-396563f001c7 swap
/dev/sdc6 79369164-c13d-415e-910e-41ae7727cb6b ext4
/dev/sdc7 737f9ed2-884c-473c-8494-43682b74ea37 swap
/dev/sdd1 CE64EEF364EEDD69 ntfs Backup Drive
/dev/sdd5 94f7ef39-a90f-4d6e-9546-9c74194e62ed ext4
/dev/sdd6 d291fd26-5e55-4bfd-9413-e15d0f57ce68 swap
/dev/sde1 48b16e9e-71f3-4fde-9c84-602331af172d ext4
/dev/sde5 57c21bfe-40bf-4373-adb3-6a20e5dcf902 swap

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/sdc6 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sdd1 /media/Backup Drive fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
/dev/sdd5 /media/94f7ef39-a90f-4d6e-9546-9c74194e62ed ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sde1 /media/48b16e9e-71f3-4fde-9c84-602331af172d ext4 (rw,nosuid,nodev,uhelper=udisks)


================================ sda1/boot.ini: ================================

--------------------------------------------------------------------------------
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect
--------------------------------------------------------------------------------

=========================== sdc1/boot/grub/menu.lst: ===========================

--------------------------------------------------------------------------------
timeout 10
color black/cyan yellow/cyan
gfxmenu (hd2,0)/boot/gfxmenu
default 0

title linux
kernel (hd2,0)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd.img

title windows
root (hd0,0)
makeactive
chainloader +1

title windows1
root (hd1,0)
map (0x81) (0x80)
map (0x80) (0x81)
makeactive
chainloader +1

title windows2
root (hd3,0)
map (0x83) (0x80)
map (0x80) (0x83)
makeactive
chainloader +1

title server 2.6.31.5-1mnb
kernel (hd2,0)/boot/vmlinuz-2.6.31.5-server-1mnb BOOT_IMAGE=server_2.6.31.5-1mnb root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd-2.6.31.5-server-1mnb.img

title server 2.6.31.14-1mnb
kernel (hd2,0)/boot/vmlinuz-2.6.31.14-server-1mnb BOOT_IMAGE=server_2.6.31.14-1mnb root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd-2.6.31.14-server-1mnb.img

title alt_windows
root (hd0,0)
map (0x81) (0x80)
map (0x80) (0x81)
makeactive
chainloader +1

title alt_windows1
root (hd1,0)
map (0x82) (0x80)
map (0x80) (0x82)
makeactive
chainloader +1

title alt_windows2
root (hd3,0)
map (0x83) (0x80)
map (0x80) (0x83)
makeactive
chainloader +1

title server 2.6.31.14-1
kernel (hd2,0)/boot/vmlinuz-2.6.31.14-server-1mnb BOOT_IMAGE=server_2.6.31.14-1 root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd-2.6.31.14-server-1mnb.img

title server 2.6.33.7-2
kernel (hd2,0)/boot/vmlinuz-2.6.33.7-server-2mnb BOOT_IMAGE=server_2.6.33.7-2 root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd-2.6.33.7-server-2mnb.img
--------------------------------------------------------------------------------

=============================== sdc1/etc/fstab: ================================

--------------------------------------------------------------------------------
# Entry for /dev/sda1 :
UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 / ext4 relatime 1 1
/dev/cdrom /media/cdrom auto umask=0,users,iocharset=utf8,noauto,ro,exec 0 0
# Entry for /dev/sdb1 :
UUID=46A0E334A0E3295F /media/win_c ntfs-3g defaults 0 0
# Entry for /dev/sdc1 :
UUID=49E0-A9F8 /media/win_c2 vfat umask=0,iocharset=utf8 0 0
# Entry for /dev/sdd1 :
UUID=CE64EEF364EEDD69 /media/win_c3 ntfs-3g defaults 0 0
none /proc proc defaults 0 0
# Entry for /dev/sda5 :
UUID=947da4ea-ede1-4cfa-b706-396563f001c7 swap swap defaults 0 0
# Entry for /dev/sdd6 :
UUID=d291fd26-5e55-4bfd-9413-e15d0f57ce68 swap swap defaults 0 0
--------------------------------------------------------------------------------

=================== sdc1: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)

2.473041058 = 2.655407616 boot/grub/menu.lst 1
5.137347698 = 5.516185088 boot/grub/stage2 1
6.644217968 = 7.134174720 boot/initrd-2.6.31.14-server-1mnb.img 1
6.650699139 = 7.141133824 boot/initrd-2.6.31.5-server-1mnb.img 1
5.095454693 = 5.471202816 boot/initrd-2.6.31.5-server-1mnb.img.old 2
6.655971050 = 7.146794496 boot/initrd-2.6.33.7-server-2mnb.img 2
6.655971050 = 7.146794496 boot/initrd.img 2
5.361087322 = 5.756423680 boot/initrd.img.old 2
6.655971050 = 7.146794496 boot/initrd-server.img 2
5.380580425 = 5.777354240 boot/vmlinuz 1
3.258452892 = 3.498737152 boot/vmlinuz-2.6.31.14-server-1mnb 1
2.269694805 = 2.437066240 boot/vmlinuz-2.6.31.5-server-1mnb 1
5.380580425 = 5.777354240 boot/vmlinuz-2.6.33.7-server-2mnb 1
5.380580425 = 5.777354240 boot/vmlinuz-server 1

=========================== sdc6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos6)'
search --no-floppy --fs-uuid --set=root 79369164-c13d-415e-910e-41ae7727cb6b
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos6)'
search --no-floppy --fs-uuid --set=root 79369164-c13d-415e-910e-41ae7727cb6b
set locale_dir=($root)/boot/grub/locale
set lang=en_GB
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos6)'
search --no-floppy --fs-uuid --set=root 79369164-c13d-415e-910e-41ae7727cb6b
insmod png
if background_image /boot/grub/linuxmint.png; then
true
else
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos6)'
search --no-floppy --fs-uuid --set=root 79369164-c13d-415e-910e-41ae7727cb6b
insmod png
if background_image /boot/grub/linuxmint.png ; then
set color_normal=white/black
set color_highlight=white/light-gray
else
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
fi
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 11, 2.6.38-13-generic (/dev/sdc6)' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos6)'
search --no-floppy --fs-uuid --set=root 79369164-c13d-415e-910e-41ae7727cb6b
linux /boot/vmlinuz-2.6.38-13-generic root=UUID=79369164-c13d-415e-910e-41ae7727cb6b ro splash quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-13-generic
}
menuentry 'Linux Mint 11, 2.6.38-13-generic (/dev/sdc6) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos6)'
search --no-floppy --fs-uuid --set=root 79369164-c13d-415e-910e-41ae7727cb6b
echo 'Loading Linux 2.6.38-13-generic ...'
linux /boot/vmlinuz-2.6.38-13-generic root=UUID=79369164-c13d-415e-910e-41ae7727cb6b ro single splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-13-generic
}
submenu "Previous Linux versions" {
menuentry 'Linux Mint 11, 2.6.38-8-generic (/dev/sdc6)' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos6)'
search --no-floppy --fs-uuid --set=root 79369164-c13d-415e-910e-41ae7727cb6b
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=79369164-c13d-415e-910e-41ae7727cb6b ro splash quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Linux Mint 11, 2.6.38-8-generic (/dev/sdc6) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos6)'
search --no-floppy --fs-uuid --set=root 79369164-c13d-415e-910e-41ae7727cb6b
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=79369164-c13d-415e-910e-41ae7727cb6b ro single splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos6)'
search --no-floppy --fs-uuid --set=root 79369164-c13d-415e-910e-41ae7727cb6b
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos6)'
search --no-floppy --fs-uuid --set=root 79369164-c13d-415e-910e-41ae7727cb6b
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 46A0E334A0E3295F
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "linux (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos1)'
search --no-floppy --fs-uuid --set=root b0049ffd-12b4-44d6-ae90-25e9b61f7ea4
linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd.img
}
menuentry "server 2.6.31.5-1mnb (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos1)'
search --no-floppy --fs-uuid --set=root b0049ffd-12b4-44d6-ae90-25e9b61f7ea4
linux /boot/vmlinuz-2.6.31.5-server-1mnb BOOT_IMAGE=server_2.6.31.5-1mnb root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd-2.6.31.5-server-1mnb.img
}
menuentry "server 2.6.31.14-1mnb (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos1)'
search --no-floppy --fs-uuid --set=root b0049ffd-12b4-44d6-ae90-25e9b61f7ea4
linux /boot/vmlinuz-2.6.31.14-server-1mnb BOOT_IMAGE=server_2.6.31.14-1mnb root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd-2.6.31.14-server-1mnb.img
}
menuentry "server 2.6.31.14-1 (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos1)'
search --no-floppy --fs-uuid --set=root b0049ffd-12b4-44d6-ae90-25e9b61f7ea4
linux /boot/vmlinuz-2.6.31.14-server-1mnb BOOT_IMAGE=server_2.6.31.14-1 root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd-2.6.31.14-server-1mnb.img
}
menuentry "server 2.6.33.7-2 (on /dev/sdc1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos1)'
search --no-floppy --fs-uuid --set=root b0049ffd-12b4-44d6-ae90-25e9b61f7ea4
linux /boot/vmlinuz-2.6.33.7-server-2mnb BOOT_IMAGE=server_2.6.33.7-2 root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd-2.6.33.7-server-2mnb.img
}
menuentry "Linux Mint 11, 2.6.38-8-generic (/dev/sdc5) (on /dev/sdd5)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdd,msdos5)'
search --no-floppy --fs-uuid --set=root 94f7ef39-a90f-4d6e-9546-9c74194e62ed
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=94f7ef39-a90f-4d6e-9546-9c74194e62ed ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Linux Mint 11, 2.6.38-8-generic (/dev/sdc5) -- recovery mode (on /dev/sdd5)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdd,msdos5)'
search --no-floppy --fs-uuid --set=root 94f7ef39-a90f-4d6e-9546-9c74194e62ed
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=94f7ef39-a90f-4d6e-9546-9c74194e62ed ro single
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (/dev/sdd1) (on /dev/sde1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sde,msdos1)'
search --no-floppy --fs-uuid --set=root dc3c75ea-aa36-4e48-b3f5-7ef9e24fad23
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=dc3c75ea-aa36-4e48-b3f5-7ef9e24fad23 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (recovery mode) (on /dev/sde1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sde,msdos1)'
search --no-floppy --fs-uuid --set=root dc3c75ea-aa36-4e48-b3f5-7ef9e24fad23
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=dc3c75ea-aa36-4e48-b3f5-7ef9e24fad23 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdc6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc6 during installation
UUID=79369164-c13d-415e-910e-41ae7727cb6b / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc7 during installation
UUID=737f9ed2-884c-473c-8494-43682b74ea37 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------

=================== sdc6: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)

84.045749664 = 90.243436544 boot/grub/core.img 1
328.704845428 = 352.944140288 boot/grub/grub.cfg 1
17.041667938 = 18.298351616 boot/initrd.img-2.6.38-13-generic 4
17.211914062 = 18.481152000 boot/initrd.img-2.6.38-8-generic 3
16.407535553 = 17.617457152 boot/vmlinuz-2.6.38-13-generic 2
84.043434143 = 90.240950272 boot/vmlinuz-2.6.38-8-generic 1
17.041667938 = 18.298351616 initrd.img 4
17.211914062 = 18.481152000 initrd.img.old 3
16.407535553 = 17.617457152 vmlinuz 2
84.043434143 = 90.240950272 vmlinuz.old 1

=========================== sdd5/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 94f7ef39-a90f-4d6e-9546-9c74194e62ed
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 94f7ef39-a90f-4d6e-9546-9c74194e62ed
set locale_dir=($root)/boot/grub/locale
set lang=en_GB
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 94f7ef39-a90f-4d6e-9546-9c74194e62ed
insmod png
if background_image /boot/grub/linuxmint.png; then
true
else
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 94f7ef39-a90f-4d6e-9546-9c74194e62ed
insmod png
if background_image /boot/grub/linuxmint.png ; then
set color_normal=white/black
set color_highlight=white/light-gray
else
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
fi
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 11, 2.6.38-8-generic (/dev/sdc5)' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 94f7ef39-a90f-4d6e-9546-9c74194e62ed
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=94f7ef39-a90f-4d6e-9546-9c74194e62ed ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
 
Old 10-19-2012, 10:40 PM   #4
golightly
LQ Newbie
 
Registered: Oct 2012
Posts: 13

Original Poster
Rep: Reputation: Disabled
Here is the rest of the file.
enuentry 'Linux Mint 11, 2.6.38-8-generic (/dev/sdc5) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 94f7ef39-a90f-4d6e-9546-9c74194e62ed
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=94f7ef39-a90f-4d6e-9546-9c74194e62ed ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 94f7ef39-a90f-4d6e-9546-9c74194e62ed
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 94f7ef39-a90f-4d6e-9546-9c74194e62ed
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 46A0E334A0E3295F
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (/dev/sdd1) (on /dev/sdd1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdd,msdos1)'
search --no-floppy --fs-uuid --set=root dc3c75ea-aa36-4e48-b3f5-7ef9e24fad23
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=dc3c75ea-aa36-4e48-b3f5-7ef9e24fad23 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (recovery mode) (on /dev/sdd1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdd,msdos1)'
search --no-floppy --fs-uuid --set=root dc3c75ea-aa36-4e48-b3f5-7ef9e24fad23
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=dc3c75ea-aa36-4e48-b3f5-7ef9e24fad23 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "server 2.6.31.5-1mnb (on /dev/sde1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sde,msdos1)'
search --no-floppy --fs-uuid --set=root b0049ffd-12b4-44d6-ae90-25e9b61f7ea4
linux /boot/vmlinuz-2.6.31.5-server-1mnb BOOT_IMAGE=server_2.6.31.5-1mnb root=UUID=b0049ffd-12b4-44d6-ae90-25e9b61f7ea4 splash=silent resume=UUID=947da4ea-ede1-4cfa-b706-396563f001c7 vga=788
initrd (hd2,0)/boot/initrd-2.6.31.5-server-1mnb.img
}
menuentry "linux-Mint8 (on /dev/sde1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sde,msdos1)'
search --no-floppy --fs-uuid --set=root b0049ffd-12b4-44d6-ae90-25e9b61f7ea4
linux /boot/vmlinuz BOOT_IMAGE=linux-Mint8 root=UUID=85935f22-995c-460e-bb60-93a101510d9c
initrd (hd2,0)/boot/initrd.img
}
menuentry "Linux Mint 11 64-bit, 2.6.38-8-generic (/dev/sda7) (on /dev/sde7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sde,msdos7)'
search --no-floppy --fs-uuid --set=root 70167994-6591-45d5-ab39-c2e9647300dc
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=70167994-6591-45d5-ab39-c2e9647300dc ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Linux Mint 11 64-bit, 2.6.38-8-generic (/dev/sda7) -- recovery mode (on /dev/sde7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sde,msdos7)'
search --no-floppy --fs-uuid --set=root 70167994-6591-45d5-ab39-c2e9647300dc
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=70167994-6591-45d5-ab39-c2e9647300dc ro single
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdd5/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc5 during installation
UUID=94f7ef39-a90f-4d6e-9546-9c74194e62ed / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc6 during installation
UUID=d291fd26-5e55-4bfd-9413-e15d0f57ce68 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------

=================== sdd5: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)

213.273643494 = 229.000830976 boot/grub/core.img 1
297.260402679 = 319.180926976 boot/grub/grub.cfg 1
197.876953125 = 212.468760576 boot/initrd.img-2.6.38-8-generic 3
213.157691956 = 228.876328960 boot/vmlinuz-2.6.38-8-generic 1
197.876953125 = 212.468760576 initrd.img 3
213.157691956 = 228.876328960 vmlinuz 1

=========================== sde1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 48b16e9e-71f3-4fde-9c84-602331af172d
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 48b16e9e-71f3-4fde-9c84-602331af172d
set locale_dir=($root)/boot/grub/locale
set lang=en_GB
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 13 Cinnamon 32-bit, 3.2.0-23-generic (/dev/sdb1)' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 48b16e9e-71f3-4fde-9c84-602331af172d
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=48b16e9e-71f3-4fde-9c84-602331af172d ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Linux Mint 13 Cinnamon 32-bit, 3.2.0-23-generic (/dev/sdb1) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 48b16e9e-71f3-4fde-9c84-602331af172d
echo 'Loading Linux 3.2.0-23-generic ...'
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=48b16e9e-71f3-4fde-9c84-602331af172d ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 48b16e9e-71f3-4fde-9c84-602331af172d
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 48b16e9e-71f3-4fde-9c84-602331af172d
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sde1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb1 during installation
UUID=48b16e9e-71f3-4fde-9c84-602331af172d / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb5 during installation
UUID=57c21bfe-40bf-4373-adb3-6a20e5dcf902 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------

=================== sde1: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)

138.204555511 = 148.396011520 boot/grub/core.img 1
396.135559082 = 425.347317760 boot/grub/grub.cfg 1
0.838581085 = 0.900419584 boot/initrd.img-3.2.0-23-generic 2
396.133823395 = 425.345454080 boot/vmlinuz-3.2.0-23-generic 1
0.838581085 = 0.900419584 initrd.img 2
396.133823395 = 425.345454080 vmlinuz 1

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sdb1

00000000 eb 58 90 4d 53 57 49 4e 34 2e 31 00 02 40 20 00 |.X.MSWIN4.1..@ .|
00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 3f 00 00 00 |........?...?...|
00000020 a1 15 c9 04 60 26 00 00 00 00 00 00 02 00 00 00 |....`&..........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 f8 a9 e0 49 4e 4f 20 4e 41 4d 45 20 20 |..)...INO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 fa b8 c0 07 8e d8 | FAT32 ......|
00000060 8e d0 bc 00 00 fb fc be 86 00 ac b4 0e 33 db cd |.............3..|
00000070 10 0a c0 75 f5 b4 00 cd 16 fa 33 c0 8e d8 8e d0 |...u......3.....|
00000080 bc ff ff fb cd 19 0d 0a 54 68 65 20 64 69 73 6b |........The disk|
00000090 20 69 73 20 4e 6f 6e 2d 53 79 73 74 65 6d 20 64 | is Non-System d|
000000a0 69 73 6b 20 21 0d 0a 50 6c 65 61 73 65 20 75 73 |isk !..Please us|
000000b0 65 20 53 79 73 74 65 6d 20 73 6f 66 74 77 61 72 |e System softwar|
000000c0 65 20 74 6f 20 6d 61 6b 65 20 73 79 73 74 65 6d |e to make system|
000000d0 20 66 69 6c 65 20 2e 0d 0a 00 00 00 00 00 00 00 | file ..........|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200


=============================== StdErr Messages: ===============================

xz: (stdin): Compressed data is corrupt
xz: (stdin): Compressed data is corrupt
xz: (stdin): Compressed data is corrupt
 
Old 10-20-2012, 11:05 AM   #5
yancek
Senior Member
 
Registered: Apr 2008
Distribution: PCLinux, Ubuntu, Slackware
Posts: 4,151

Rep: Reputation: 625Reputation: 625Reputation: 625Reputation: 625Reputation: 625Reputation: 625
You have quite a lot of Mint entries for Mint 8, 11 and 13 in various locations with a number of different kernels. The only reference I see to Mint 13 is in the grub.cfg file at the bottom of your last post for sde1. Unfortunately, the entry in the grub.cfg file there shows an entry only for your Mint on sdb1. Don't know how that happened. Have you been switching disk attachments? Are you able to boot any of the other versions of Mint? If so, do that and mount sde1 to access the grub.cfg file on that partition and copy the Mint entry from there to your working grub.cfg file. It has the correct uuid so just change the set root= entry from
Quote:
set root='(hd0,msdos1)'
to
Quote:
set root='(hd4,msdos1)'
.

You have a very complicated setup with all the different kernels and versions of Mint. Hopefully, this will work?
 
Old 10-20-2012, 01:04 PM   #6
golightly
LQ Newbie
 
Registered: Oct 2012
Posts: 13

Original Poster
Rep: Reputation: Disabled
Yes I didn't realise that I had so many redundant OS installed and don't know how to remove them, the whole things a bit of a mess. Don't know about switching disk attachments other than changing BIOS priorities and disabling drives in an effort to get Mint 13 running.
The only working OS I have are Windows sda1 and Mint 11 sdc6.

If it makes things easier, all I need is Windows on sda and Mint 11 and 13 on sdc
sdb holds audio recording software and files
sdd holds all my data
sde is a USB Iomega HD which I'll use for back up when I get the current situation resolved.

Because I'm a novice and didn't want to lose my operating Mint 11 on sdc6, I was trying to install Mint 13 on sde to evaluate it.
Apologies for going on at length, I hope this clarifies
 
Old 10-20-2012, 03:01 PM   #7
yancek
Senior Member
 
Registered: Apr 2008
Distribution: PCLinux, Ubuntu, Slackware
Posts: 4,151

Rep: Reputation: 625Reputation: 625Reputation: 625Reputation: 625Reputation: 625Reputation: 625
You should be able then, to boot Mint 11 on sdc6. From there mount the sde1 partition and open a file manager to navigate to the /boot/grub/grub.cfg file on sde1. Copy the entry for Mint 13 to the /boot/grub/grub.cfg file on sdc6. You need to be root to do this (use sudo) and make sure you label it by clearly putting its menuentry as Mint13 on sde1. Good luck!
 
Old 10-21-2012, 09:05 AM   #8
golightly
LQ Newbie
 
Registered: Oct 2012
Posts: 13

Original Poster
Rep: Reputation: Disabled
Thanks again yancek, I'll give it a try.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mint 12, grub recovery> error after fresh install murankar Linux Mint 2 01-18-2012 03:35 AM
Grub 22 error using dual boot of Win7 and Linux Mint brianste Linux - Newbie 12 12-30-2009 08:31 PM
Fixing GRUB Error 17 on Linux Mint UbuntuIdiot Linux - Newbie 8 10-22-2009 04:32 PM
Mint 7 Instal from Labs CD re-boots to GRUB error 18 widda Linux - Software 5 07-24-2009 01:45 AM
re installation of grub in Linux mint after installing xp over mint sampad.sarangi General 1 01-15-2008 05:37 PM


All times are GMT -5. The time now is 09:38 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration