LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Laptop and Netbook (https://www.linuxquestions.org/questions/linux-laptop-and-netbook-25/)
-   -   solution for intel sound cards here (https://www.linuxquestions.org/questions/linux-laptop-and-netbook-25/solution-for-intel-sound-cards-here-503714/)

LuisC-SM 04-27-2007 09:57 AM

Larry.

In fact, I never tried to suggest you to pay for any distro. The fact that I'm happy with SLED 10 and I did pay for it, does not neccesaryly meant to say you must pay for it. However, I did mention that there is a 2 months period where you decide if you keep it or not, but you must not pay until the 2 months are over.
The free version is the one you previusly installed, but as noticed there are a lot of problems with sound that I also could not fix except when I tried the non-free version. I mentioned before, that these kind of laptops (toshiba) are very agressive with linux, I was realy tired of installing/uninstalling distros with no succees until I went for SLED who was the most friendly with my laptop.
I'm having a lot of fun here in my city telling my friends to get Ubuntu, I've given away around 200 copies of this distro 'cause is the one that I know better and really enjoy. When you see my daughter's PC with ubuntu 6.10 you are thinking you have SLED, but it has only some enhancemnts with SLAB v2 (SLED's Control Panel).
I only wanted to say that I expressed my happiness and thanks to this distro 'cause it really solved my problem as I do not use windows anymore.
I'm happy you will try pcLinuxOS, it is a distro I REALLY like, but again, here is useless :(. But please, after playing a little with pclinux, be so kind to report your experience, it's a distro that I believe will make a lot of difference inthe near future.
There are more than 100 linux flavors and the one you choose and gives you the result you spect, will always be the best distro for you. The reasson why I ask you this is because in my office I've tried to install Slax and I've had a hard day with the kernel options (by default kernel 2.4.x is the option) and I heard pclinux is based on slax and want to give it a try in one or two months.

All the best

Luis

PS. Good luck with your surgery :D

Zoandar 04-27-2007 12:32 PM

Hi Luis,

I am sorry if I sounded like I was saying that you were trying to talk me into something. That was not my intention. I was just pointing out that the SLED version you suggested was not entirely free.

Since the 2 month free trial of the retail version solved your sound issues on your notebook, then it would be a good idea for me to try it. I've got nothing to lose in doing that. If I don't like it, I can try something else after the 2 months is up ( or sooner ).

When I get back to this notebook project, I'll download SLED as you suggested. But I am in the middle of a rather complex project not related to my experiments with Linux, and I need to finish that first.

I heard yesterday that the Texas / Mexico border had some really bad tornado weather I hope you are not near that area of Mexico! I am in the Northeast state of Ohio in the US. It has been a slow transition to Spring here, and we are having our share of Thunderstorms now. But Winter finally seems to have lost its grasp on us.

Regards,

Zoandar

kamransoomro84 04-29-2007 02:00 AM

Hi.

I got the same problem as Mithic, and I can't figure out how to solve it. Can anyone help me?


Thanks,

LuisC-SM 04-29-2007 05:57 PM

Quote:

Originally Posted by Zoandar
Hi Luis,

I am sorry if I sounded like I was saying that you were trying to talk me into something. That was not my intention. I was just pointing out that the SLED version you suggested was not entirely free.

Since the 2 month free trial of the retail version solved your sound issues on your notebook, then it would be a good idea for me to try it. I've got nothing to lose in doing that. If I don't like it, I can try something else after the 2 months is up ( or sooner ).

When I get back to this notebook project, I'll download SLED as you suggested. But I am in the middle of a rather complex project not related to my experiments with Linux, and I need to finish that first.

I heard yesterday that the Texas / Mexico border had some really bad tornado weather I hope you are not near that area of Mexico! I am in the Northeast state of Ohio in the US. It has been a slow transition to Spring here, and we are having our share of Thunderstorms now. But Winter finally seems to have lost its grasp on us.

Regards,

Zoandar

Understood just as you pointed earliar but clearifyng :).
Taking back the SLED 10 payment, I saw a post in the opensuse forum that there is a way to ommit it by changing your repositories to some other ones (You must google a little to find it).

Just in case you try PCLinux OS, please always remember to post your comments ... they always will be very valuable for everyone.

As I live in the Gulf of Mexico (Veracruz Port), we had nothing here except a lot of heat :). And yes, this was a devastating tornado, lot of people lost their lives, homes, cars, buildings, etc. :(
I used to travel your state about 5 times going by car all the way up to Montana around 5 times when I was younger. Nice state and nice people :). and also very many tornados and electric storms over there.

Take good care and hope your project turns just fine

Regards

Luis

Zoandar 04-29-2007 10:32 PM

Hi Luis,

Glad to hear you were not affected. It is sad about all the people, and the damage the tornados cause.

I have also been to Montana. Glacier Park is the most beautiful place I have ever seen. But I have a lot of "seeing" yet to do. I have not been to California, nor any of the desert southwest, nor to Mexico. Maybe some day I will get a chance to make that circuit. That would be a great drive!

Take care, too.

Regards,

Zoandar

vibhor_81 05-06-2007 02:36 AM

no sound in my laptop with fc5 and fc6
 
hello everybody,

i am a kind of newbie in the linux world, trying to start the sound on my laptop for last one year. i've tried both fc5 and fc6,
but when i try to detect my sound card the system detect some sound card but finally auto detect fails. i can not here any sound when the sound is played by auto detect of sound card application.

can anybody help me out with this??

please tell what i need to send for further diagnosis.

the display for " lspci | grep Audio " is as follows:
------------------------------------------------------------------
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)

-----------------------------------------------------------------
please see and tell me whats to be done next

thanks

adam_blackice 05-06-2007 07:03 AM

i send you my answer on your mail :)

feel comfortable to contact me :)

vibhor_81 05-07-2007 12:33 PM

hello adam, there's some problem when i try to configure the file
 
hi adam

i did as given in your post,
afterdownloading the alsa driver, lib and utils.
i copied them to the specified directory, and unzipped them with the help of commands given by your post.


but when i try to ./configure it, it gave some error. i am pasteing the terminal window output. please review and tell me whats to be done next.

-----------------------------------------------------------------

[root@localhost src]# cd alsa
[root@localhost alsa]# ls
alsa-driver-1.0.13 alsa-lib-1.0.13 alsa-utils-1.0.13
alsa-driver-1.0.13.tar alsa-lib-1.0.13.tar alsa-utils-1.0.13.tar
[root@localhost alsa]# cd alsa-driver-1.0.13
[root@localhost alsa-driver-1.0.13]# ./configure --with-cards=hda-intel --with-sequencer=yes;make;make install
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
make all-deps
make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.13'
make[1]: Nothing to be done for `all-deps'.
make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.13'

Please, run the configure script as first...

rm -f /snd*.*o /persist.o /isapnp.o
make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.13/acore'
Makefile:6: /usr/src/alsa/alsa-driver-1.0.13/Makefile.conf: No such file or directory
/usr/src/alsa/alsa-driver-1.0.13/Rules.make:75: /Rules.make1: No such file or directory
make[1]: *** No rule to make target `/Rules.make1'. Stop.
make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.13/acore'
make: *** [install-modules] Error 1
[root@localhost alsa-driver-1.0.13]#
-----------------------------------------------------------------

regards

vibhor

adam_blackice 05-08-2007 03:15 PM

you see this

checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no

please pick up your yum anad install gcc

vibhor_81 05-10-2007 07:46 AM

hi adam, next error is here.
 
hi adam,

i've installed gcc,

now when i am running the command, i am getting the following output:



--------------------------------------------------------------

[root@localhost alsa-driver-1.0.13]# ./configure --with-cards=hda-intel --with-sequencer=yes;make;make install
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for ranlib... ranlib
checking for a BSD-compatible install... /usr/bin/install -c
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether time.h and sys/time.h may both be included... yes
checking whether gcc needs -traditional... no
checking for current directory... /usr/src/alsa/alsa-driver-1.0.13
checking cross compile...
checking for directory with kernel source... /lib/modules/2.6.18-1.2798.fc6/source
checking for directory with kernel build... /lib/modules/2.6.18-1.2798.fc6/build
checking for kernel linux/version.h... no
The file /lib/modules/2.6.18-1.2798.fc6/source/include/linux/version.h does not exist.
Please install the package with full kernel sources for your distribution
or use --with-kernel=dir option to specify another directory with kernel
sources (default is /lib/modules/2.6.18-1.2798.fc6/source).
make all-deps
make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.13'
make[1]: Nothing to be done for `all-deps'.
make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.13'

Please, run the configure script as first...

rm -f /snd*.*o /persist.o /isapnp.o
make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.13/acore'
Makefile:6: /usr/src/alsa/alsa-driver-1.0.13/Makefile.conf: No such file or directory
/usr/src/alsa/alsa-driver-1.0.13/Rules.make:75: /Rules.make1: No such file or directory
make[1]: *** No rule to make target `/Rules.make1'. Stop.
make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.13/acore'
make: *** [install-modules] Error 1
[root@localhost alsa-driver-1.0.13]#

---------------------------------------------------------------

after reading the output, i guess "version.h file" is missing.
but where can i get the file?

thanks for your prompt responses.
can you suggest me about this error?

looking forwards for your support.

vibhor

exvor 05-10-2007 09:05 AM

You need to tell the configure script where it can find your kernel sources.

adam_blackice 05-10-2007 05:50 PM

The file /lib/modules/2.6.18-1.2798.fc6/source/include/linux/version.h does not exist.
Please install the package with full kernel sources for your distribution
or use --with-kernel=dir option to specify another directory with kernel
sources (default is /lib/modules/2.6.18-1.2798.fc6/source).

this file doesnot exist try to install it

or try to update kernel
better i suggest you try another distro it will make thigs easier like ubuntu

exvor 05-11-2007 05:17 PM

Yeah this is another one of the reasons i despise redhat.

adam_blackice 05-12-2007 04:24 PM

exvor

you are surely right redhat is distro kinda for a servers stuff

but for home users or desktop there is mandriva , my lovely pet UBUNTU :)

exvor 05-12-2007 10:18 PM

Ehhh I find Mepis really nice as a windows alternative. But for my serious work and play I cant live without my LFS


All times are GMT -5. The time now is 06:59 PM.