LinuxQuestions.org
Support LQ: Use code LQ3 and save $3 on Domain Registration
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Laptop and Netbook
User Name
Password
Linux - Laptop and Netbook Having a problem installing or configuring Linux on your laptop? Need help running Linux on your netbook? This forum is for you. This forum is for any topics relating to Linux and either traditional laptops or netbooks (such as the Asus EEE PC, Everex CloudBook or MSI Wind).

Notices



Reply
 
Search this Thread
Old 05-22-2005, 04:23 PM   #1
MDBlueIce
Member
 
Registered: Aug 2004
Distribution: Suse Linux 9.1
Posts: 47

Rep: Reputation: 15
Slackware 10.1 on Dell INSPIRON 600m == no sound


I just installed SLackware 10.1 (KDE as Desktop enviornment), and I have no sound at all. I'm running on an Inspiron 600m. Does anyone know how I can begin to diagnose this problem? This is my first Linux distro.
 
Old 05-22-2005, 05:13 PM   #2
mokele
Member
 
Registered: Jan 2005
Location: Puerto Rico
Distribution: Slackware 13
Posts: 146

Rep: Reputation: 15
More info.
post output of the following commands.
/sbin/lspci -v
dmesg
lsmod
 
Old 05-22-2005, 08:26 PM   #3
MDBlueIce
Member
 
Registered: Aug 2004
Distribution: Suse Linux 9.1
Posts: 47

Original Poster
Rep: Reputation: 15
Here are the outputs-

/sbin/lspci -v:

00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03)
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [e4] #09 [f104]
Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: e8000000-efffffff

00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4541
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at bf80 [size=32]

00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4541
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at bf40 [size=32]

00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4541
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at bf20 [size=32]

00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Computer Corporation: Unknown device 011e
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at f4fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [2080]

00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: f6000000-fbffffff

00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 4541
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at bfa0 [size=16]
Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 011e
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at b800 [size=256]
I/O ports at bc40 [size=64]
Memory at f4fff800 (32-bit, non-prefetchable) [size=512]
Memory at f4fff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
Subsystem: PCTel Inc: Unknown device 4c21
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at b400 [size=256]
I/O ports at b080 [size=128]
Capabilities: [50] Power Management version 2

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 01) (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 011e
Flags: bus master, VGA palette snoop, stepping, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at e8000000 (32-bit, prefetchable) [size=128M]
I/O ports at c000 [size=256]
Memory at fcff0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702 Gigabit Ethernet (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 8126
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 11
Memory at faff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-

02:01.0 CardBus bridge: O2 Micro, Inc.: Unknown device 7113 (rev 20)
Subsystem: Dell Computer Corporation: Unknown device 011e
Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001

02:01.1 CardBus bridge: O2 Micro, Inc.: Unknown device 7113 (rev 20)
Subsystem: Dell Computer Corporation: Unknown device 011e
Flags: bus master, stepping, slow devsel, latency 168, IRQ 11
Memory at 20002000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 20c00000-20fff000 (prefetchable)
Memory window 1: 21000000-213ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001

02:03.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
Subsystem: Intel Corp.: Unknown device 2565
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at fafef000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2


dmesg:

ring IRQ 11 with 00:1d.1
PCI: Sharing IRQ 11 with 02:01.1
PCI: Found IRQ 11 for device 02:01.1
PCI: Sharing IRQ 11 with 00:1d.1
PCI: Sharing IRQ 11 with 02:01.0
Yenta ISA IRQ mask 0x04b0, PCI irq 11
Socket status: 30000006
Yenta ISA IRQ mask 0x06b0, PCI irq 11
Socket status: 30000410
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: excluding 0x8c0-0x8df
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: excluding 0x300-0x307 0x378-0x37f
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
tg3.c:v3.15 (January 6, 2005)
PCI: Found IRQ 11 for device 02:00.0
PCI: Sharing IRQ 11 with 00:1d.2
PCI: Sharing IRQ 11 with 00:1f.1
eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100
/1000BaseT Ethernet 00:0b:db:df:cb:01
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
PCI: Found IRQ 11 for device 00:1f.6
PCI: Sharing IRQ 11 with 00:1f.5
PCI: Sharing IRQ 11 with 02:03.0
PCI: Setting latency timer of device 00:1f.6 to 64
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.6
PCI: Sharing IRQ 11 with 02:03.0
PCI: Setting latency timer of device 00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 42199 usecs
intel8x0: clocking to 48000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
i810_rng hardware driver 0.9.8 loaded
hw_random: cannot enable RNG, aborting
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 11 for device 00:1d.7
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2
ehci_hcd 00:1d.7: irq 11, pci mem e0a17c00
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: cache line size of 32 is not supported by device 00:1d.7
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:1d.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Setting latency timer of device 00:1d.0 to 64
uhci.c: USB UHCI at I/O 0xbf80, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1d.1
PCI: Sharing IRQ 11 with 02:01.0
PCI: Sharing IRQ 11 with 02:01.1
PCI: Setting latency timer of device 00:1d.1 to 64
uhci.c: USB UHCI at I/O 0xbf40, IRQ 11
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1d.2
PCI: Sharing IRQ 11 with 00:1f.1
PCI: Sharing IRQ 11 with 02:00.0
PCI: Setting latency timer of device 00:1d.2 to 64
uhci.c: USB UHCI at I/O 0xbf20, IRQ 11
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hub.c: new USB device 00:1d.0-1, assigned address 2
hub.c: USB hub found
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
hub.c: 2 ports detected
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
hub.c: new USB device 00:1d.0-1.1, assigned address 3
usb.c: USB device 3 (vend/prod 0x43d/0x7c) is not claimed by any active driver.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
hub.c: new USB device 00:1d.0-1.2, assigned address 4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb.c: USB device 4 (vend/prod 0x43d/0x7b) is not claimed by any active driver.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
hub.c: new USB device 00:1d.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc03d) is not claimed by any active drive
r.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x043
D pid 0x007B
printer.c: v0.13: USB Printer Device Class driver
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
usb.c: registered new driver usbmouse
hw_random: cannot enable RNG, aborting
input0: Logitech USB-PS/2 Optical Mouse on usb3:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
usbdevfs: remount parameter error
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
ALSA ../alsa-kernel/pci/intel8x0m.c:401: codec_semaphore: semaphore is not ready [0x1][0x701300]
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 1: semaphore is not readyfor register 0x54
ALSA ../alsa-kernel/pci/intel8x0m.c:401: codec_semaphore: semaphore is not ready [0x1][0x700300]
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 1: semaphore is not readyfor register 0x54
ALSA ../alsa-kernel/pci/intel8x0m.c:401: codec_semaphore: semaphore is not ready [0x1][0x700300]
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 1: semaphore is not readyfor register 0x54
ALSA ../alsa-kernel/pci/intel8x0m.c:401: codec_semaphore: semaphore is not ready [0x1][0x700300]
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 1: semaphore is not readyfor register 0x54
ALSA ../alsa-kernel/pci/intel8x0m.c:401: codec_semaphore: semaphore is not ready [0x1][0x700300]
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 1: semaphore is not readyfor register 0x54
ALSA ../alsa-kernel/pci/intel8x0m.c:401: codec_semaphore: semaphore is not ready [0x1][0x700304]
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 1: semaphore is not readyfor register 0x54


lsmod:

Module Size Used by Not tainted
snd-pcm-oss 36704 0 (unused)
snd-mixer-oss 12152 0 [snd-pcm-oss]
keybdev 1892 0 (unused)
mousedev 4020 1
hid 20804 0 (unused)
usbmouse 1880 0 (unused)
input 3200 0 [keybdev mousedev hid usbmouse]
printer 7648 0 (unused)
uhci 24284 0 (unused)
ehci-hcd 17516 0 (unused)
usbcore 58860 1 [hid usbmouse printer uhci ehci-hcd]
i810_rng 2528 0 (unused)
snd-intel8x0 18080 0
snd-intel8x0m 8708 0
snd-ac97-codec 52472 0 [snd-intel8x0 snd-intel8x0m]
snd-pcm 54504 0 [snd-pcm-oss snd-intel8x0 snd-intel8x0m snd-ac97-codec]
snd-timer 13412 0 [snd-pcm]
snd 31268 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-intel8x0m snd-ac97-codec snd-pcm snd-timer]
snd-page-alloc 4712 0 [snd-mixer-oss snd-intel8x0 snd-intel8x0m snd-pcm snd-timer snd]
soundcore 3396 7 [snd]
tg3 52940 1
ds 6548 2
yenta_socket 10436 2
pcmcia_core 39172 0 [ds yenta_socket]
ntfs 51232 1 (autoclean)
ide-scsi 9392 0
agpgart 45092 0 (unused)




Thanks in advance for any help you may offer.
 
Old 05-23-2005, 10:42 PM   #4
mokele
Member
 
Registered: Jan 2005
Location: Puerto Rico
Distribution: Slackware 13
Posts: 146

Rep: Reputation: 15
Possible solution

-Add the following line in /etc/hotplug/blacklist

snd-intel8x0m

-After that run alsaconf. Finish the process

-Run alsamixer configure your channels
the letter mm at the bottom means channel is
muted hit -m- to unmute and use your arrow keys
to move sides and lower-higher volumes

-After that run alsactl store as root

That should do it. Let us know
 
Old 05-24-2005, 06:08 PM   #5
MDBlueIce
Member
 
Registered: Aug 2004
Distribution: Suse Linux 9.1
Posts: 47

Original Poster
Rep: Reputation: 15
When I run alsaconf, I am presented with two sound cards: intel and legacy. I choose intel, and the program finisshes its execution. Here is what happens when I try to run alsamixer:

bash-3.00# alsamixer
No mixer elems found

There is still no sound on my laptop. Do you know what this no elems message means?
 
Old 05-24-2005, 07:58 PM   #6
eeades
Member
 
Registered: Sep 2004
Distribution: Slackware
Posts: 117

Rep: Reputation: 15
Try "alsamixer -c 1" If that gives you the mixer window, then check to see that you typed "snd-intel8x0m" correctly into the file /etc/hotplug/blacklist. If it still gives you "No mixer elems found", then run alsaconf again.

Eric
 
Old 05-25-2005, 01:18 AM   #7
MDBlueIce
Member
 
Registered: Aug 2004
Distribution: Suse Linux 9.1
Posts: 47

Original Poster
Rep: Reputation: 15
I made sure the spelling of the sound card in the file is correct. I ran alsaconf again, then I get the following error when attempting to run alsamixer:

bash-3.00# alsamixer -c 1

alsamixer: function snd_ctl_open failed for hw:1: No such device


Don't know what I should do. Any ideas? Thanks.
 
Old 05-25-2005, 06:51 PM   #8
eeades
Member
 
Registered: Sep 2004
Distribution: Slackware
Posts: 117

Rep: Reputation: 15
I do not know what else it could be. It sounds as though the modem driver (snd-intel8x0m) is being loaded instead of the sound driver (snd-intel8x0). What is the output of lsmod?

Eric
 
Old 05-25-2005, 07:19 PM   #9
mokele
Member
 
Registered: Jan 2005
Location: Puerto Rico
Distribution: Slackware 13
Posts: 146

Rep: Reputation: 15
I think there is something wrong with your kernel configuration on alsa

run: whereis alsa

post output.
 
Old 05-27-2005, 01:30 PM   #10
MDBlueIce
Member
 
Registered: Aug 2004
Distribution: Suse Linux 9.1
Posts: 47

Original Poster
Rep: Reputation: 15
Here is the output of lsmod on my system:

Module Size Used by Not tainted
snd-pcm-oss 36704 0
snd-mixer-oss 12152 0 [snd-pcm-oss]
printer 7648 0 (unused)
keybdev 1892 0 (unused)
mousedev 4020 1
hid 20804 0 (unused)
usbmouse 1880 0 (unused)
input 3200 0 [keybdev mousedev hid usbmouse]
uhci 24284 0 (unused)
ehci-hcd 17516 0 (unused)
usbcore 58860 1 [printer hid usbmouse uhci ehci-hcd]
i810_rng 2528 0 (unused)
snd-intel8x0 18080 0
snd-ac97-codec 52472 0 [snd-intel8x0]
snd-pcm 54504 0 [snd-pcm-oss snd-intel8x0 snd-ac97-codec]
snd-timer 13412 0 [snd-pcm]
snd 31268 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-ac97-codec snd-pcm snd-timer]
soundcore 3396 4 [snd]
snd-page-alloc 4712 0 [snd-mixer-oss snd-intel8x0 snd-pcm snd-timersnd]
tg3 52940 1
ds 6548 2
yenta_socket 10436 2
pcmcia_core 39172 0 [ds yenta_socket]
ntfs 51232 1 (autoclean)
ide-scsi 9392 0
agpgart 45092 0 (unused)
bash-3.00$ su
Password:
bash-3.00# lsmod
Module Size Used by Not tainted
snd-pcm-oss 36704 0
snd-mixer-oss 12152 0 [snd-pcm-oss]
printer 7648 0 (unused)
keybdev 1892 0 (unused)
mousedev 4020 1
hid 20804 0 (unused)
usbmouse 1880 0 (unused)
input 3200 0 [keybdev mousedev hid usbmouse]
uhci 24284 0 (unused)
ehci-hcd 17516 0 (unused)
usbcore 58860 1 [printer hid usbmouse uhci ehci-hcd]
i810_rng 2528 0 (unused)
snd-intel8x0 18080 0
snd-ac97-codec 52472 0 [snd-intel8x0]
snd-pcm 54504 0 [snd-pcm-oss snd-intel8x0 snd-ac97-codec]
snd-timer 13412 0 [snd-pcm]
snd 31268 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-ac97-codec snd-pcm snd-timer]
soundcore 3396 4 [snd]
snd-page-alloc 4712 0 [snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd]
tg3 52940 1
ds 6548 2
yenta_socket 10436 2
pcmcia_core 39172 0 [ds yenta_socket]
ntfs 51232 1 (autoclean)
ide-scsi 9392 0
agpgart 45092 0 (unused)

and here is the output of the whereis command:

bash-3.00# whereis alsa
alsa: /usr/include/alsa /usr/share/alsa


Sorry for the delayed reply, and thanks for the help.
 
Old 06-30-2005, 04:08 AM   #11
o2_sparx
LQ Newbie
 
Registered: Jun 2005
Distribution: Slackware
Posts: 16

Rep: Reputation: 0
On my dell 600m i had to add the sound as modules in my kernel then i could run alsaconf and it found my card and has been working fine ever since. im running kernel 2.6.9 and everything seems to be working.
 
Old 07-15-2005, 04:32 AM   #12
bednarjm
Member
 
Registered: Jul 2005
Location: Franklin, PA
Distribution: Fedora 19
Posts: 65

Rep: Reputation: 18
i need help with my alsamixer too

The groundhog is like most other prophets;
it delivers its message and then disappears.

root@laptop:~# /sbin/lspci -v
00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, fast devsel, latency 0
Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] #09 [8105]

00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, fast devsel, latency 0

00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, fast devsel, latency 0

00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA]) Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, fast devsel, latency 0, IRQ 6
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 1800 [size=8]
Capabilities: [d0] Power Management version 1

00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, fast devsel, latency 0
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1

00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, medium devsel, latency 0, IRQ 6
I/O ports at 1820 [size=32]

00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, medium devsel, latency 0, IRQ 6
I/O ports at 1840 [size=32]

00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, medium devsel, latency 0, IRQ 6
I/O ports at 1860 [size=32]

00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, medium devsel, latency 0, IRQ 10
Memory at e0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [2080]

00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e05fffff

00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, medium devsel, latency 0, IRQ 6
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 1810 [size=16]
Memory at 40000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 03)
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: medium devsel, IRQ 10
I/O ports at 1880 [size=32]

00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: medium devsel, IRQ 10
I/O ports at 1c00 [size=256]
I/O ports at 18c0 [size=64]
Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
Memory at e0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 2400 [size=256]
I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2

02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, fast devsel, latency 64, IRQ 6
Memory at e0204000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at <unassigned> [disabled] [size=16K]
Capabilities: [40] Power Management version 2

02:04.0 Network controller: Intel Corp.: Unknown device 4220 (rev 05)
Subsystem: Intel Corp.: Unknown device 2701
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e0208000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2

02:06.0 CardBus bridge: Texas Instruments: Unknown device 8031
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at e0209000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: e0400000-e04ff000 (prefetchable)
Memory window 1: e0300000-e03ff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003000-000030ff
16-bit legacy interface ports at 0001

02:06.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032 (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e020a000 (32-bit, non-prefetchable) [size=2K]
Memory at e0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2

02:06.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033
Subsystem: Acer Incorporated [ALI]: Unknown device 0064
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e0206000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2

root@laptop:~# dmesg
offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
usb.c: registered new driver usbmouse
input0: Logitech Optical USB Mouse on usb3:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
PCI: Found IRQ 10 for device 00:1f.5
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 00:1f.6
PCI: Sharing IRQ 10 with 02:04.0
PCI: Setting latency timer of device 00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hw_random: cannot enable RNG, aborting
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.7.7, written by David Dawes <dawes@tungstengraphics.com>
PCI: Found IRQ 6 for device 00:02.0
PCI: Sharing IRQ 6 with 00:1d.0
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <e0000000-e007ffff>
Trying to free nonexistent resource <e8000000-efffffff>
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x40
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x46
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x40
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x46
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x40
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x46
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x40
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x46
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x40
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x46
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x40
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x46
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x40
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x46
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x40
ALSA ../alsa-kernel/pci/intel8x0m.c:415: codec_write 0: semaphore is not ready for register 0x46
root@laptop:~# lsmod
Module Size Used by Not tainted
snd-pcm-oss 36704 0
snd-mixer-oss 12152 1 [snd-pcm-oss]
keybdev 1892 0 (unused)
mousedev 4020 0 (unused)
hid 20804 0 (unused)
usbmouse 1880 0 (unused)
input 3200 0 [keybdev mousedev hid usbmouse]
uhci 24284 0 (unused)
ehci-hcd 17516 0 (unused)
usbcore 58860 1 [hid usbmouse uhci ehci-hcd]
i810_rng 2528 0 (unused)
snd-intel8x0m 8708 2
snd-ac97-codec 52472 0 [snd-intel8x0m]
snd-pcm 54504 0 [snd-pcm-oss snd-intel8x0m snd-ac97-codec]
snd-timer 13412 0 [snd-pcm]
snd 31268 1 [snd-pcm-oss snd-mixer-oss snd-intel8x0m snd-ac97-codec snd-pcm snd-timer]
snd-page-alloc 4712 0 [snd-mixer-oss snd-intel8x0m snd-pcm snd-timer snd]
soundcore 3396 3 [snd]
b44 13644 1
ohci1394 23888 0 (unused)
ieee1394 41636 0 [ohci1394]
ds 6548 1
yenta_socket 10436 1
pcmcia_core 39172 0 [ds yenta_socket]
ide-scsi 9392 0
agpgart 45092 0 (unused)
root@laptop:~#
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dell Inspiron 600m ACPI standby/suspend jfromcanada Linux - Laptop and Netbook 1 03-11-2011 03:39 PM
Dell Inspiron 600m Kernel .config SqdnGuns Slackware 2 10-19-2005 08:34 PM
Slackware 10.1 & Dell Inspiron 600m tuxrules Slackware 9 06-30-2005 04:03 AM
dell inspiron 600m keyboard failure redjokerx General 0 01-02-2005 03:36 AM
Dell Inspiron 600m Wireless CBurt Linux - Laptop and Netbook 3 09-30-2004 08:32 PM


All times are GMT -5. The time now is 10:23 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration