LinuxQuestions.org - Power on problem with Satellite M30X-112 and ACPI

Dear all,

I have a Toshiba Satellite M30X-122. It has a problem with power. Sometimes it goes off immediatly (2-5 seconds) after power on. :(

If it starts and I boot Linux with ACPI it goes of while KDE initializes itself. :( Without ACPI (or with Windows) it runs stable.

Any hints?

Thanks

I booted Linux with ACPI and the Laptop switch off. I found in /var/log/dmesg.0

Quote:

[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
...
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs[ 0.143167] ACPI: Core revision 20080926
[ 0.146390] ACPI: Checking initramfs for custom DSDT
[ 0.556452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.600002] EISA bus registered
[ 0.600002] ACPI: bus type pci registered
[ 0.600002] PCI: PCI BIOS revision 2.10 entry at 0xfd962, last bus=2
[ 0.600002] PCI: Using configuration type 1 for base access
[ 0.600002] ACPI: EC: Look up EC in DSDT
[ 0.604824] ACPI: Interpreter enabled
[ 0.604871] ACPI: (supports S0 S3 S4 S5)
[ 0.605052] ACPI: Using IOAPIC for interrupt routing
[ 0.649132] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.649180] ACPI: EC: driver started in poll mode
[ 0.649362] ACPI: No dock devices found.
[ 0.649417] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.649504] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
[ 0.649652] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.649698] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.649743] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[ 0.649795] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff]
[ 0.649834] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.649883] pci 0000:00:1d.7: PME# disabled
[ 0.649996] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.650047] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.650103] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
...
[ 0.652426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.652661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.652789] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.659593] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.660128] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.660664] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.661199] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.661735] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.662309] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.662844] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.663417] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.664042] ACPI: WMI: Mapper loaded
[ 0.664258] SCSI subsystem initialized
[ 0.664344] libata version 3.00 loaded.
[ 0.664392] usbcore: registered new interface driver usbfs
[ 0.664453] usbcore: registered new interface driver hub
[ 0.664527] usbcore: registered new device driver usb
[ 0.664691] PCI: Using ACPI for IRQ routing
[ 0.664835] Bluetooth: Core ver 2.13
[ 0.664835] NET: Registered protocol family 31
[ 0.664835] Bluetooth: HCI device and connection manager initialized
[ 0.664835] Bluetooth: HCI socket layer initialized
[ 0.664835] NET: Registered protocol family 8
[ 0.664835] NET: Registered protocol family 20
[ 0.664835] NetLabel: Initializing
[ 0.664835] NetLabel: domain hash size = 128
[ 0.664835] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.664835] NetLabel: unlabeled traffic allowed by default
[ 0.664835] AppArmor: AppArmor Filesystem Enabled
[ 0.664835] pnp: PnP ACPI init
[ 0.664835] ACPI: bus type pnp registered
[ 0.688147] pnp: PnP ACPI: found 9 devices
[ 0.688191] ACPI: ACPI bus type pnp unregistered
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.688237] PnPBIOS: Disabled by ACPI PNP
...
[ 1.604441] ACPI: AC Adapter [ACAD] (on-line)
[ 1.624488] ACPI: Battery Slot [BAT1] (battery present)
[ 1.624607] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.624663] ACPI: Power Button (FF) [PWRF]
[ 1.624753] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.624858] ACPI: Lid Switch [LID]
[ 1.624948] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.625004] ACPI: Power Button (CM) [PWRB]
[ 1.625440] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 1.625663] processor ACPI_CPU:00: registered as cooling_device0
[ 1.625710] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.648472] isapnp: Scanning for PnP cards...
[ 2.001940] isapnp: No Plug & Play device found
...
[ 28.445541] udev: starting version 141
[ 28.984044] evbug.c: Connected device: input0 (Power Button (FF) at LNXPWRBN/button/input0)
[ 28.984675] evbug.c: Connected device: input1 (Lid Switch at PNP0C0D/button/input0)
[ 28.984701] evbug.c: Connected device: input2 (Power Button (CM) at PNP0C0C/button/input0)
[ 28.984724] evbug.c: Connected device: input3 (Macintosh mouse button emulation at unknown)
[ 28.984748] evbug.c: Connected device: input4 (AT Translated Set 2 keyboard at isa0060/serio0/in
put0)
[ 29.088349] parport_pc 00:06: reported by Plug and Play ACPI
[ 29.088429] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 29.175882] Linux agpgart interface v0.103
[ 29.200576] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 29.201508] evbug.c: Connected device: input5 (PC Speaker at isa0061/input0)
[ 29.350032] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.399271] intel_rng: FWH not detected
[ 29.440033] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 29.440095] ACPI: I/O resource 0000:00:1f.3 [0x1880-0x189f] conflicts with ACPI region SMBI [0x1880-0x188f]
[ 29.440153] ACPI: Device needs an ACPI driver
[ 29.571095] ppdev: user-space parallel port driver
[ 29.717253] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 29.740330] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 29.753754] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input6
[ 29.757457] evbug.c: Connected device: input6 (Video Bus at /video/input0)
[ 29.757461] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
...
[ 40.429967] pci 0000:01:00.0: power state changed by ACPI to D0
[ 40.429979] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

After this change of power state the file dmesg.0 ends.

I suppose that there is a problem with the BIOS and/or ACPI interface on the laptop.