| agambier |
12-25-2010 01:34 PM |
Linux Mint 10 on Asus K52J freezes sometimes
hello,
I've installed Linux Mint 10 on Asus-K52J laptop.
Everything works fine except sometimes, the system freezes for 20 seconds and unfreezes.
Here dmesg after the freeze.
Code:
[ 83.889221] ata1.00: exception Emask 0x40 SAct 0x7 SErr 0x80800 action 0x6 frozen
[ 83.889229] ata1: SError: { HostInt 10B8B }
[ 83.889233] ata1.00: failed command: WRITE FPDMA QUEUED
[ 83.889242] ata1.00: cmd 61/00:00:00:d4:0b/04:00:0b:00:00/40 tag 0 ncq 524288 out
[ 83.889243] res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x44 (timeout)
[ 83.889247] ata1.00: status: { DRDY }
[ 83.889250] ata1.00: failed command: WRITE FPDMA QUEUED
[ 83.889257] ata1.00: cmd 61/00:08:00:d0:0b/04:00:0b:00:00/40 tag 1 ncq 524288 out
[ 83.889259] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
[ 83.889262] ata1.00: status: { DRDY }
[ 83.889265] ata1.00: failed command: WRITE FPDMA QUEUED
[ 83.889272] ata1.00: cmd 61/00:10:00:cc:0b/04:00:0b:00:00/40 tag 2 ncq 524288 out
[ 83.889274] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)
[ 83.889277] ata1.00: status: { DRDY }
[ 83.889283] ata1: hard resetting link
[ 84.208623] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 84.210961] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 84.211365] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 84.211373] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 84.216034] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 84.216406] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 84.216411] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 84.218422] ata1.00: configured for UDMA/133
[ 84.218430] ata1.00: device reported invalid CHS sector 0
[ 84.218435] ata1.00: device reported invalid CHS sector 0
[ 84.218439] ata1.00: device reported invalid CHS sector 0
[ 84.218453] ata1: EH complete
[ 86.186689] ata1.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
[ 86.186698] ata1.00: irq_stat 0x08000000, interface fatal error
[ 86.186705] ata1: SError: { UnrecovData HostInt 10B8B BadCRC }
[ 86.186712] ata1.00: failed command: READ FPDMA QUEUED
[ 86.186725] ata1.00: cmd 60/00:00:10:eb:3a/01:00:07:00:00/40 tag 0 ncq 131072 in
[ 86.186727] res 40/00:00:10:eb:3a/00:00:07:00:00/40 Emask 0x50 (ATA bus error)
[ 86.186733] ata1.00: status: { DRDY }
[ 86.186743] ata1: hard resetting link
[ 86.504847] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 86.507094] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 86.507459] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 86.507467] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 86.512205] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 86.512532] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 86.512540] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 86.514542] ata1.00: configured for UDMA/133
[ 86.514557] ata1: EH complete
Does anyone have an idea ?
Thanks
Alex |
