Intel i810 DRM - not functioning
 

Hello, My name is Rory.

I'm a computer programmer in training and I'm relatively new to linux. I taken on the challenge of installing and configuring Gentoo on my MDG VisionBook 6000 with an Integrated Intel graphics controller.

I've tried everything from the suggested linux driver on the site, to CVS Sources, all along following the Gentoo Configuration docs.

Below is a paste of the lspci information:

00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
00:00.1 System peripheral: Intel Corp.: Unknown device 3584 (rev 02)
00:00.3 System peripheral: Intel Corp.: Unknown device 3585 (rev 02)
00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03)
00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corp. 82801DBM Ultra ATA Storage Controller (rev 03)
00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 03)
01:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
01:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)

I'm pleading for any assistance here as a last resort. I would much appreciate any helpful information or solutions to this issue.

aim: ReaperManzz
email: ReaperMan@Rogers.com

first of all, did you get the 855patch?
google for it!

second, the modules should be build as modules and you should use the cvs, not with the kernel (unless you use 2.6).