Inspiron 6000 WUXGA 15.4
I have Ubuntu Edgy and 915resolution installed on my machine.
I am trying to get my video resolution to display 1920 x 1200 that it is capable of. Here are the available modes I found using the 915resolution-l command: *************************************************** Intel 800/900 Series VBIOS Hack : version 0.5.2 Chipset: 915GM BIOS: TYPE 1 Mode Table Offset: $C0000 + $269 Mode Table Entries: 36 Mode 30 : 640x480, 8 bits/pixel Mode 32 : 800x600, 8 bits/pixel Mode 34 : 1024x768, 8 bits/pixel Mode 38 : 1280x1024, 8 bits/pixel Mode 3a : 1600x1200, 8 bits/pixel Mode 3c : 1920x1440, 8 bits/pixel Mode 41 : 640x480, 16 bits/pixel Mode 43 : 800x600, 16 bits/pixel Mode 45 : 1024x768, 16 bits/pixel Mode 49 : 1280x1024, 16 bits/pixel Mode 4b : 1600x1200, 16 bits/pixel Mode 4d : 1920x1440, 16 bits/pixel Mode 50 : 640x480, 32 bits/pixel Mode 52 : 800x600, 32 bits/pixel Mode 54 : 1024x768, 32 bits/pixel Mode 58 : 1280x1024, 32 bits/pixel Mode 5a : 1600x1200, 32 bits/pixel Mode 5c : 1920x1440, 32 bits/pixel Mode 60 : 400x772, 8 bits/pixel Mode 61 : 400x772, 16 bits/pixel Mode 62 : 400x772, 32 bits/pixel Mode 63 : 512x771, 8 bits/pixel Mode 64 : 512x771, 16 bits/pixel Mode 65 : 512x771, 32 bits/pixel Mode 66 : 1920x1200, 8 bits/pixel Mode 67 : 1920x1200, 16 bits/pixel Mode 68 : 1920x1200, 32 bits/pixel ******************************************** This is what my xorg.conf file looks like: ************************************************** # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Files" FontPath "/usr/share/X11/fonts/misc" FontPath "/usr/share/X11/fonts/cyrillic" FontPath "/usr/share/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/X11/fonts/Type1" FontPath "/usr/share/X11/fonts/100dpi" FontPath "/usr/share/X11/fonts/75dpi" FontPath "/usr/share/fonts/X11/misc" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" Option "XkbOptions" "lv3:ralt_switch" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ExplorerPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "true" EndSection Section "InputDevice" Identifier "Synaptics Touchpad" Driver "synaptics" Option "SendCoreEvents" "true" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "0" EndSection Section "InputDevice" Driver "wacom" Identifier "stylus" Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB Option "Type" "stylus" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "InputDevice" Driver "wacom" Identifier "eraser" Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB Option "Type" "eraser" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "InputDevice" Driver "wacom" Identifier "cursor" Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB Option "Type" "cursor" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "Device" Identifier "Generic Video Card" Driver "i810" BusID "PCI:0:2:0" Option "UseFBDev" "true" VideoRam 128000 EndSection Section "Monitor" Identifier "Generic Monitor" Option "DPMS" HorizSync 28-96 VertRefresh 43-60 EndSection Section "Screen" Identifier "Default Screen" Device "Generic Video Card" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1920x1200" "1680x1050" "1440x900" "1280x800" EndSubSection SubSection "Display" Depth 4 Modes "1920x1200" "1680x1050" "1440x900" "1280x800" EndSubSection SubSection "Display" Depth 8 Modes "1920x1200" "1680x1050" "1440x900" "1280x800" EndSubSection SubSection "Display" Depth 15 Modes "1920x1200" "1680x1050" "1440x900" "1280x800" EndSubSection SubSection "Display" Depth 16 Modes "1920x1200" "1680x1050" "1440x900" "1280x800" EndSubSection SubSection "Display" Depth 24 Modes "1920x1200" "1680x1050" "1440x900" "1280x800" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "stylus" "SendCoreEvents" InputDevice "cursor" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" InputDevice "Synaptics Touchpad" EndSection Section "DRI" Mode 0666 EndSection ********************************************************** Even though I have 1900 x 1200 listed in the xorg.conf, it doesn't work. What do I have to do to get this to work properly? I have found all kinds of info about this.....but nothing that tells me EXACTLY what I need to do. I am kinda new to this. Any help will be greatly appreciated. |
Run
Code:
/usr/sbin/915resolution 68 Fluxx. |
Editing init scripts for screen resolution
How exactly would I do that?
Where would I out it....I am slightly a noob at this. Thanx. |
Correct screen resolution worth $50 to me
I have messed around with this for way too long.
I have already lost my xorg.conf file several times and now I am in the middle of reinstalling from scratch. The first person that can explain to me how to get the following screen resolutions on my inspiron 6000 laptop with the 915 chipset....I will pay $50 via PayPal. "1920x1200" "1680x1050" "1440x900" "1280x800" I am trying to get these resolutions working. Thank You for your help in advance. |
All times are GMT -5. The time now is 12:16 AM. |