praneethgv

[Log in to get rid of this advertisement]

Hi Friends,

I m using a Presario C700 series Laptop with te WideScreen,
I have problems in loading the X server.
It could not start the Installation in Graphical Mode, but successfully done in text mode.

Most of the experts have said that system-config-display would resolve, but its actually not.

i tried system-config-display --reconfig, but still it says that it could not start.

Error: No Valid Modes
Screens found, but none have a usable configuration.

fatal server error:
No Screens found

Here is my /var/log/Xorg.0.log

LinRedMaskSize: 5

LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0

LinRsvdFieldPosition: 0
MaxPixelClock: 230000000

(II) VESA(0): Total Memory: 119 64KB banks (7616kB)
(II) VESA(0): <default monitor>: Using hsync value of 48.94 kHz
(II) VESA(0): <default monitor>: Using vrefresh value of 59.98 Hz
(II) VESA(0): Not using mode "1280x1024" (no mode of this name)
(II) VESA(0): Not using mode "1024x800" (no mode of this name)
(II) VESA(0): Not using built-in mode "800x600" (hsync out of range)
(II) VESA(0): Not using built-in mode "640x480" (hsync out of range)
(II) VESA(0): Not using built-in mode "1024x768" (hsync out of range)
(EE) VESA(0): No valid modes
(II) UnloadModule: "vesa"
(II) UnloadModule: "ddc"
(II) Unloading /usr/lib/xorg/modules/libddc.so
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules/libint10.so
(II) UnloadModule: "vbe"
(II) Unloading /usr/lib/xorg/modules/libvbe.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Kindly help me to solve this issue.

Thanks
Praneeth.

Junior Hacker

Have you tried: system-config-display --reconfigure. Also, can you post the "screen" section of the /etc/X11/xorg.conf file if that does nothing?

farslayer

would have been nice to see what Graphics chip you have in your post.. (output of lspci

http://intellinuxgraphics.org/documentation.html

this wants the 'intel' driver in xorg.conf. and hopefully your kernel is new enough to have support for the 965 Chipset..