LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Laptop and Netbook (http://www.linuxquestions.org/questions/linux-laptop-and-netbook-25/)
-   -   Acer WiFi,Camera and grphics are not working (http://www.linuxquestions.org/questions/linux-laptop-and-netbook-25/acer-wifi-camera-and-grphics-are-not-working-704037/)

yogusmilu 02-11-2009 09:29 PM

Acer WiFi,Camera and grphics are not working
 
Guys this is my 2nd thread here.I am not able to start my wifi ,camera .My graphics are poor.It seems that if drivers are not present.the details are

x-ecutioner@x-ecutioner-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
04:00.0 Network controller: Atheros Communications Inc. Unknown device 002a (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
07:00.0 System peripheral: JMicron Technologies, Inc. Unknown device 2382
07:00.2 SD Host controller: JMicron Technologies, Inc. Unknown device 2381
07:00.3 System peripheral: JMicron Technologies, Inc. Unknown device 2383
07:00.4 System peripheral: JMicron Technologies, Inc. Unknown device 2384

Please help me on this .I am having Ubuntu 8.04 Hardy version

silenceGL 02-12-2009 07:52 AM

What Laptop are you running ? AAO ? Seems like the kernel is simply not-up-to-date to handle the hardware. I have the "Acer Crystal Eye" working OOTB since kernel 2.6.27, i think that the wifi is just working OOTB since 2.6.28...well, that would mean you'll have to upgrade or relay on the Debian wiki for AAO (comprehensive steps there), and no, i have not searched LQ for an "inhouse"-solution yet.
About your poor graphics: did you manually correct the xorg.conf ? At least you should have the driver "intel" instead of "vesa", if you're trying to run Compiz, you have to use some more tweaks (all in the wiki).
Good Luck, @nno

farslayer 02-12-2009 09:04 AM

open a command prompt and issue the following command

update-pciids

then post the output of lspci again.. then we should be able to see which Atheros wireless card you have..


Also from the looks of some of that hardware (intel 4xxx series graphics) you should be running Ubuntu 8.10, it would have had an easier time detecting your hardware and it should actually support your graphics controller out of the box.

yogusmilu 02-12-2009 11:55 PM

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSectione

Here is my details

yogusmilu 02-12-2009 11:56 PM

IF I have to put intel rather than vesa in device section

farslayer 02-13-2009 09:06 AM

so did you ignore what people asked you to do in the other 3 threads as well ?

if so, I can see why you still haven't solved your issues..



And you are correct vesa is the wrong driver it should be the intel driver


All times are GMT -5. The time now is 12:41 AM.