I have made a regular update to 3.0.101 of my OpenSuse 11.4 EVERGREEN. I cleaned my media_build and got the latest linux TV drivers with
git clone git://linuxtv.org/media_build.git. I followed the instructions and doesn't get any errors during compilation and install.
The TV-Tuner is found:
Code:
Bus 001 Device 005: ID 2040:6502 Hauppauge WinTV HVR-900
The firmware is found and initialized:
Code:
[ 7.675968] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
[ 7.733327] xc2028 0-0061: creating new instance
[ 7.733330] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 7.733496] em2882/3 #0: Config register raw data: 0xd0
[ 7.734428] em2882/3 #0: AC97 vendor ID = 0xffffffff
[ 7.734816] em2882/3 #0: AC97 features = 0x6a90
[ 7.734817] em2882/3 #0: Empia 202 AC97 audio processor detected
[ 7.846499] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 7.894896] em2882/3 #0: v4l2 driver version 0.2.0
[ 7.929203] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 8.944576] MTS (4), id 00000000000000ff:
[ 8.944579] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9.243362] em2882/3 #0: V4L2 video device registered as video1
[ 9.243364] em2882/3 #0: V4L2 VBI device registered as vbi0
[ 9.244020] em2882/3 #0: analog set to isoc mode.
[ 9.244022] em2882/3 #0: dvb set to isoc mode.
[ 9.244569] usbcore: registered new interface driver em28xx
[ 9.266915] em28xx-audio.c: probing for em28xx Audio Vendor Class
[ 9.266917] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 9.266918] em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
[ 9.267020] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 9.314498] WARNING: You are using an experimental version of the media stack.
[ 9.314499] As the driver is backported to an older kernel, it doesn't offer
[ 9.314500] enough quality for its usage in production.
[ 9.314501] Use it with care.
[ 9.314501] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 9.314502] 7d459937dc09bb8e448d9985ec4623779427d8a5 [media] Add driver for Samsung S5K5BAF camera sensor
[ 9.314503] 2310e3c41a71f3db88039aabbd8c9ab5a4d57e65 [media] Add DT binding documentation for Samsung S5K5BAF camera sensor
[ 9.314504] 347f7a3763601d7b466898d1f10080b7083ac4a3 [media] subdev autoselect only works if I2C and I2C_MUX is selected
[ 9.400054] xc2028 0-0061: Error on line 1299: -19
[ 9.425203] Registered IR keymap rc-hauppauge
[ 9.425274] input: em28xx IR (em2882/3 #0) as /devices/pci0000:00/0000:00:12.2/usb1/1-6/rc/rc0/input7
[ 9.425311] rc0: em28xx IR (em2882/3 #0) as /devices/pci0000:00/0000:00:12.2/usb1/1-6/rc/rc0
[ 9.425922] Em28xx: Initialized (Em28xx Input Extension) extension
But when I try to start kaffeine to wath DVB-T TV it cannot find an device and I get the following error in dmesg:
Code:
[ 115.365328] xc2028 0-0061: Error on line 1299: -19
[ 115.610677] xc2028 0-0061: i2c input error: rc = -19 (should be 2)
[ 115.611130] xc2028 0-0061: i2c input error: rc = -19 (should be 2)
[ 115.611925] xc2028 0-0061: Error on line 1299: -19
[ 219.311351] xc2028 0-0061: i2c input error: rc = -19 (should be 2)
[ 219.311720] xc2028 0-0061: i2c input error: rc = -19 (should be 2)
[ 219.382578] xc2028 0-0061: Error on line 1299: -19
I have the device file /dev/video1 but no dvb-devices.
Can anybody give me a hint what to do?
