farslayer

[Log in to get rid of this advertisement]

sudo apt-get install build-essential libc6-dev libsdl-dev


try again and see if all the errors are gone...

janeku

Everything was OK:
root@DualX2:/home/petrika/gspcav1-20071224# make
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/petrika/gspcav1-20071224 CC=cc modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.24-20-generic'
Building modules, stage 2.
MODPOST 1 modules
make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-20-generic'
root@DualX2:/home/petrika/gspcav1-20071224# make install
mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx.ko
rm -f /lib/modules/`uname -r`/kernel/drivers/media/video/gspca.ko
install -c -m 0644 gspca.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/
/sbin/depmod -ae
root@DualX2:/home/petrika/gspcav1-20071224# gspcagui -d /dev/video0
bash: gspcagui: command not found


Unfortunately I cant start now gspcagui Why ??

This is folder of gspca:
petrika@DualX2:~/gspcav1-20071224$ ls
changelog gspca_core.c gspca.o Module.symvers Sunplus-jpeg
Conexant gspca_core.o kgspca.err Pixart Transvision
cutlog.py gspca.h license READ_AND_INSTALL utils
decoder gspca.ko Makefile Sonix Vimicro
Etoms gspca.mod.c Makefile.kld spcagui20060127
gspca_build gspca.mod.o Mars-Semi Sunplus

And this is from Spcga original as it is extracted:
petrika@DualX2:~/gspcav1-20071224/spcagui20060127$ ls
avilib.c gui.c jpeg_header.h SFont.h spcagui.c utils.c
avilib.h gui.h makefile spca5xx.h Spcagui.desktop utils.h
CHANGELOG icons README spcadecoder.c spcav4l.c
config.h intro.c readme.avilib spcadecoder.h spcav4l.h
Doc intro.h SFont.c spcagamma.h TODO


Why I cant make anything without problem on Ubuntu and Linux at all ???

dblade

At this point, please consider creating another thread about compiling this driver. I'd personally do it out of respect for everyone else subscribed to this thread.

farslayer

It would be nice if a Moderator could split this part out into a seperate thread. It has gone a bit farther than I expected.

http://mxhaard.free.fr/spca50x/Downl...0060127.tar.gz
http://mxhaard.free.fr/spca50x/Downl...0061208.tar.gz

Jack_Fedora

MX-310
Canon

rbees

Motorokr Z6m

Not to be mistaken for the Z6 which I beleave has the linux os on it. This one has brew.

$ dmesg | tail
[ 5656.467139] usb 1-2: USB disconnect, address 18
[ 5656.467146] usb 1-2.1: USB disconnect, address 19
[ 5669.135286] usb 1-6: USB disconnect, address 17
[ 5726.722665] hub 2-0:1.0: unable to enumerate USB device on port 6
[ 5727.090656] usb 1-6: new full speed USB device using ohci_hcd and address 20
[ 5727.310823] usb 1-6: configuration #1 chosen from 1 choice
[ 5727.319304] usb 1-6: New USB device found, idVendor=22b8, idProduct=2b24
[ 5727.319312] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5727.319316] usb 1-6: Product: Motorola Z6m
[ 5727.319320] usb 1-6: Manufacturer: Motorola Inc.

buzzbiker

If there was a god then the drivers would be here and done. If you believe in that "stuff" then your mind is no longer to think for yourself. Therefore you really
are in a mind state of Armagedon.

"But He Loves you" - George Carlin

In conclusion if you want to thank anyone. It would be the "PEOPLE" free thinkers, and there vision of equal and free world of a world of one.

little_fire

My VGA card is SiS 771/671. Don't have any support for it. (

Gidi

Please I need a driver for this printer
That works under Linux

Mr. Gidon Cafri

farslayer

http://www.openprinting.org/show_pri...=Lexmark-X1180

maddogwriter

I live in Guatemala where there is a limited choice of scanners. Apparently these HPs are available. But need a driver. Thanks,

Dwight Wayne Coop
certified MicroBorgSoft hater

Gidi

My Computer is an old AMD
Processo: AMD Athlon(tm) XP 2000+
MB : Abit AN7 (nVidia-nForce2)
Memory: DDR, PC3200 (200 MHz), 750 MBytes,