LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 10-29-2010, 10:54 AM   #1
kususe
Member
 
Registered: Oct 2010
Posts: 54

Rep: Reputation: 0
Usb pen not recognized on debian 5.03 squeeze


Until yesterday, my usb pen worked.
Now, nothing. I've seen that my iPod charges only, but it's not recognized as a camera.
Today I've update only my system.
this is the out of lsusb:

Code:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(Usb pen is linked)

Suggestions?
 
Old 10-29-2010, 11:06 AM   #2
corp769
Guru
 
Registered: Apr 2005
Posts: 5,807

Rep: Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996
Can you post the output of dmesg?
 
Old 10-29-2010, 11:17 AM   #3
kususe
Member
 
Registered: Oct 2010
Posts: 54

Original Poster
Rep: Reputation: 0
[CODE]
[ 85.329714] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 85.508526] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 88.932149] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 88.975701] lib80211_crypt: registered algorithm 'TKIP'
[ 99.792230] eth1: no IPv6 routers present
/CODE]

I think it's not related to my problem..
 
Old 10-29-2010, 11:52 AM   #4
corp769
Guru
 
Registered: Apr 2005
Posts: 5,807

Rep: Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996Reputation: 996
I don't either. I just wanted to see if you had any weird error messages. Could you post your /var/log/messages? Thats the best I have for you man for now, we need to see what all your system is doing....
 
Old 10-29-2010, 12:17 PM   #5
kususe
Member
 
Registered: Oct 2010
Posts: 54

Original Poster
Rep: Reputation: 0
Code:
Oct 29 17:55:51 debian kernel: [   15.144691] ttyS1: LSR safety check engaged!
Oct 29 17:56:00 debian kernel: [   23.391358] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 29 17:56:02 debian kernel: [   25.821811] b44: eth0: powering down PHY
Oct 29 17:56:02 debian kernel: [   25.827596] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 29 17:56:22 debian kernel: [   45.903226] pci 0000:01:00.0: power state changed by ACPI to D0
Oct 29 17:56:22 debian kernel: [   45.903239] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6
Oct 29 17:56:22 debian kernel: [   46.037682] [drm] Initialized drm 1.1.0 20060810
Oct 29 17:56:22 debian kernel: [   46.123962] [drm] radeon defaulting to userspace modesetting.
Oct 29 17:56:22 debian kernel: [   46.126549] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
Oct 29 17:56:22 debian kernel: [   46.280442] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
Oct 29 17:56:22 debian kernel: [   46.280461] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
Oct 29 
17:56:22 debian kernel: [   46.280495] pci 0000:01:00.0: putting AGP V2 device into 1x mode
Oct 29 17:56:23 debian kernel: [   46.531661] [drm] Setting GART location based on new memory map
Oct 29 17:56:23 debian kernel: [   46.531715] [drm] Loading R300 Microcode
Oct 29 17:56:23 debian kernel: [   46.531984] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
Oct 29 17:56:57 debian kernel: [   81.242456] ADDRCONF(NETDEV_UP): eth1: link is not ready
Oct 29 17:57:01 debian kernel: [   85.314507] b44: eth0: powering down PHY
Oct 29 17:57:02 debian kernel: [   85.329714] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 29 17:57:02 debian kernel: [   85.508526] ADDRCONF(NETDEV_UP): eth1: link is not ready
Oct 29 17:57:05 debian kernel: [   88.932149] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
last 20 lines
 
Old 10-29-2010, 03:21 PM   #6
honeybadger
Member
 
Registered: Aug 2007
Location: India
Distribution: Slackware (mainly) and then a lot of others...
Posts: 847

Rep: Reputation: Disabled
Unplug the pen drive and then plug it back in and then run dmesg.
Does the pen drive show up on the gui menu? Change the usb ports check and see if you have leds on the pen drive blinking. See if another pc is able to detect it. Plenty of tUhings to do - try it.
 
Old 10-30-2010, 05:59 PM   #7
kususe
Member
 
Registered: Oct 2010
Posts: 54

Original Poster
Rep: Reputation: 0
The result is the same.
This is "dmesg | tail -20" output:

Code:
[  380.932893] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  381.100885] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  384.545911] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  394.744027] eth1: no IPv6 routers present
[  401.945556] b44: eth0: powering down PHY
[  401.960882] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  402.128855] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  402.198209] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  413.132026] eth1: no IPv6 routers present
[  453.277688] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  457.191304] b44: eth0: powering down PHY
[  457.205100] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  457.396110] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  457.717326] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  468.396026] eth1: no IPv6 routers present
[  479.573582] b44: eth0: powering down PHY
[  479.588881] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  479.767303] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  480.109938] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  490.236027] eth1: no IPv6 routers present

usb pen work on other pc.
I think the problem is linked to usb hardware of my pc.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLVED] thunar stopped to mount USB storages (Debian squeeze) kaz2100 Debian 11 09-27-2011 02:21 AM
[SOLVED] USB audio under Debian Squeeze Limašon Linux - Hardware 1 07-15-2010 01:16 PM
Blackjack tethering via USB, not recognized? (debian) screennameless Linux - Hardware 3 12-30-2009 11:13 AM
Pen Drives not being recognized minm Linux - Hardware 13 07-24-2004 01:11 AM
USB pen writing problem (debian) jobano Linux - Hardware 1 05-25-2004 01:26 PM


All times are GMT -5. The time now is 04:22 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration