USB Laser Printer HP Laserjet 1000 is not working with Fedora Core 1,2,3 & RedHat 9
 

I have one Laserjet HP 1000. I tried to configure it using RedHat 9, Fedora Core
1,2 & 3 . It is not working. It is as a USB Printer.

hi there
can linux detect that??
or u having problem after that

regards

Hi there, i have exactly the same problem. The queue recieves the test pages i try to print and no error is output local machine. I fairly new to Linux but i think it's something to do with USB not working as i'm also trying to connect my BT ADSL modem via USB with no joy.

I keeo finding references to the HOTPLUG which should automatically pick up USB devices???? not for me !:confused:

check ur log for any messages

tail /var/log/messages

will show u last log of 10 lines

regards

Linux Printing is a good place to look for info on Linux printer issues. I had a similar problem with OfficeJet G55 (a usb printer). Had to install the hpoj driver. Not sure if this is relevant to your model, check HPOJ
Chris

I had the same problem.

[root@ppc@batavia ~]# tail /var/log/messages
Feb 23 15:47:35 ppc@batavia nmbd[2440]: Doing a node status request to the domain master browser at IP 192.168.8.25 failed.
Feb 23 15:47:35 ppc@batavia nmbd[2440]: Cannot get workgroup name.
Feb 23 15:47:35 ppc@batavia nmbd[2440]: [2005/02/23 15:47:35, 0] nmbd/nmbd_browsesync.c:get_domain_master_name_node_status_fail(488)
Feb 23 15:47:35 ppc@batavia nmbd[2440]: get_domain_master_name_node_status_fail:
Feb 23 15:47:35 ppc@batavia nmbd[2440]: Doing a node status request to the domain master browser at IP 192.168.8.25 failed.
Feb 23 15:47:35 ppc@batavia nmbd[2440]: Cannot get workgroup name.
Feb 23 15:47:35 ppc@batavia nmbd[2440]: [2005/02/23 15:47:35, 0] nmbd/nmbd_browsesync.c:get_domain_master_name_node_status_fail(488)
Feb 23 15:47:35 ppc@batavia nmbd[2440]: get_domain_master_name_node_status_fail:
Feb 23 15:47:35 ppc@batavia nmbd[2440]: Doing a node status request to the domain master browser at IP 192.99.98.200 failed.
Feb 23 15:47:35 ppc@batavia nmbd[2440]: Cannot get workgroup name.
[root@ppc@batavia ~]#

here is the last error messages

I [23/Feb/2005:15:47:39 +0700] Adding start banner page "none" to job 7.
I [23/Feb/2005:15:47:39 +0700] Adding end banner page "none" to job 7.
I [23/Feb/2005:15:47:39 +0700] Job 7 queued on 'Laserjet' by 'root'.
I [23/Feb/2005:15:47:39 +0700] Started filter /usr/lib/cups/filter/pstops (PID 32318) for job 7.
I [23/Feb/2005:15:47:39 +0700] Started filter /usr/lib/cups/filter/foomatic-rip (PID 32319) for job 7.
I [23/Feb/2005:15:47:39 +0700] Started backend /usr/lib/cups/backend/usb (PID 32320) for job 7.
E [23/Feb/2005:15:47:40 +0700] PID 32319 stopped with status 1!
I [23/Feb/2005:15:47:40 +0700] Hint: Try setting the LogLevel