LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 12-16-2011, 05:45 AM   #1
sanrock
LQ Newbie
 
Registered: Dec 2011
Posts: 3

Rep: Reputation: Disabled
"Urgent" Unable to mount USB External Hard Drive


while trying to mount External Hard drive

getting below error


1483060.232036] usb 2-1: new high speed USB device using ehci_hcd and address 11
[1483060.365106] usb 2-1: configuration #1 chosen from 1 choice
[1483060.365835] scsi10 : SCSI emulation for USB Mass Storage devices
[1483060.367263] usb-storage: device found at 11
[1483060.367268] usb-storage: waiting for device to settle before scanning
[1483065.364157] usb-storage: device scan complete
[1483065.364811] scsi 10:0:0:0: Direct-Access Seagate Desktop 0130 PQ: 0 ANSI: 4
[1483065.366023] sd 10:0:0:0: Attached scsi generic sg2 type 0
[1483065.370721] sd 10:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[1483065.371372] sd 10:0:0:0: [sdb] Write Protect is off
[1483065.371378] sd 10:0:0:0: [sdb] Mode Sense: 2f 08 00 00
[1483065.371383] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[1483065.374122] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[1483065.374132] sdb: sdb1
[1483065.398732] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[1483065.398741] sd 10:0:0:0: [sdb] Attached SCSI disk
[1483200.380099] INFO: task mount:10853 blocked for more than 120 seconds.
[1483200.380106] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[1483200.380111] mount D 0000ef73 0 10853 2441 0x00000000
[1483200.380119] eab23ce4 00000082 eab23ca0 0000ef73 00000000 c084b860 f2087564 c084b860
[1483200.380131] 62c3c30d 000544d7 c084b860 c084b860 f2087564 c084b860 c084b860 f6b6f340
[1483200.380143] 62c0fef4 000544d7 f20872c0 f20872c0 c1d08860 eab23d30 eab23cf4 c058aeb1
[1483200.380155] Call Trace:
[1483200.380168] [<c058aeb1>] io_schedule+0x61/0xa0
[1483200.380175] [<c022ef18>] sync_buffer+0x38/0x40
[1483200.380181] [<c058b66d>] __wait_on_bit+0x4d/0x70
[1483200.380186] [<c022eee0>] ? sync_buffer+0x0/0x40
[1483200.380192] [<c022eee0>] ? sync_buffer+0x0/0x40
[1483200.380198] [<c058b73b>] out_of_line_wait_on_bit+0xab/0xc0
[1483200.380205] [<c01686e0>] ? wake_bit_function+0x0/0x50
[1483200.380211] [<c022eede>] __wait_on_buffer+0x2e/0x30
[1483200.380218] [<c02c16a9>] jread+0x89/0x110
[1483200.380225] [<c02c1796>] do_one_pass+0x66/0x450
[1483200.380230] [<c022eee0>] ? sync_buffer+0x0/0x40
[1483200.380236] [<c058b73b>] ? out_of_line_wait_on_bit+0xab/0xc0
[1483200.380243] [<c02c1c4b>] journal_recover+0x5b/0xe0
[1483200.380250] [<c02c3cea>] journal_load+0x3a/0x90
[1483200.380257] [<c0273a33>] ext3_load_journal+0xe3/0x260
[1483200.380263] [<c0264b2b>] ? ext3_rsv_window_add+0x5b/0x70
[1483200.380270] [<c027488b>] ext3_fill_super+0xcdb/0xff0
[1483200.380277] [<c020d012>] get_sb_bdev+0x162/0x1a0
[1483200.380283] [<c0273bb0>] ? ext3_fill_super+0x0/0xff0
[1483200.380290] [<c0270736>] ext3_get_sb+0x26/0x30
[1483200.380296] [<c0273bb0>] ? ext3_fill_super+0x0/0xff0
[1483200.380302] [<c020cb87>] vfs_kern_mount+0x67/0x170
[1483200.380308] [<c0221553>] ? get_fs_type+0x33/0xb0
[1483200.380313] [<c020ccee>] do_kern_mount+0x3e/0xe0
[1483200.380319] [<c0224693>] do_mount+0x1c3/0x200
[1483200.380325] [<c022473b>] sys_mount+0x6b/0xa0
[1483200.380332] [<c01033ec>] syscall_call+0x7/0xb
[1483200.380339] [<c0590000>] ? kprobes_module_callback+0x90/0x100
[1483246.753117] sd 10:0:0:0: timing out command, waited 180s
[1483246.753135] sd 10:0:0:0: [sdb] Unhandled sense code
[1483246.753139] sd 10:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[1483246.753145] sd 10:0:0:0: [sdb] Sense Key : Hardware Error [current]
[1483246.753153] Info fld=0x0
[1483246.753156] sd 10:0:0:0: [sdb] Add. Sense: Internal target failure
[1483246.753165] sd 10:0:0:0: [sdb] CDB: Read(10): 28 00 00 01 be 8f 00 00 f0 00
[1483246.753183] end_request: I/O error, dev sdb, sector 114319
[1483246.753198] JBD: Failed to read block at offset 13688
[1483246.753209] JBD: recovery failed
[1483246.753212] EXT3-fs: error loading journal.
[1483246.754236] sd 10:0:0:0: timing out command, waited 180s
[1483246.754244] sd 10:0:0:0: [sdb] Unhandled sense code
[1483246.754248] sd 10:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[1483246.754254] sd 10:0:0:0: [sdb] Sense Key : Hardware Error [current]
[1483246.754261] Info fld=0x0
[1483246.754264] sd 10:0:0:0: [sdb] Add. Sense: Internal target failure
[1483246.754272] sd 10:0:0:0: [sdb] CDB: Read(10): 28 00 00 01 bf 7f 00 00 10 00
[1483246.754288] end_request: I/O error, dev sdb, sector 114559


Please help me in this.

Thanks
 
Old 12-16-2011, 06:23 AM   #2
acid_kewpie
Moderator
 
Registered: Jun 2001
Location: UK
Distribution: Gentoo, RHEL, Fedora, Centos
Posts: 43,415

Rep: Reputation: 1968Reputation: 1968Reputation: 1968Reputation: 1968Reputation: 1968Reputation: 1968Reputation: 1968Reputation: 1968Reputation: 1968Reputation: 1968Reputation: 1968
This is not "Urgent" in any way for us. Please don't mark it as such. This is a voluntary community where people donate their time and knowledge to help others, and demanding priority attention is not fair.

Last edited by acid_kewpie; 12-16-2011 at 06:24 AM.
 
1 members found this post helpful.
Old 12-16-2011, 06:43 AM   #3
sanrock
LQ Newbie
 
Registered: Dec 2011
Posts: 3

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by acid_kewpie View Post
This is not "Urgent" in any way for us. Please don't mark it as such. This is a voluntary community where people donate their time and knowledge to help others, and demanding priority attention is not fair.
Hi kewpie

This is my backup hard drive which i take backups.. and i have 1TB of data in it.

Please help in resolving this

Thanks
 
Old 12-16-2011, 06:47 AM   #4
markush
Senior Member
 
Registered: Apr 2007
Location: Germany
Distribution: Slackware
Posts: 3,974

Rep: Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849
Hello sanrock, welcome to the forum,

please provide more information. Did it work before? on the same computer? which kernel are you using? (please post the output of
Code:
uname -a
Markus
 
1 members found this post helpful.
Old 12-16-2011, 06:51 AM   #5
repo
LQ 5k Club
 
Registered: May 2001
Location: Belgium
Distribution: Linux Mint
Posts: 8,516

Rep: Reputation: 896Reputation: 896Reputation: 896Reputation: 896Reputation: 896Reputation: 896Reputation: 896
Looks like a drive failure to me.

Kind regards
 
1 members found this post helpful.
Old 12-16-2011, 06:55 AM   #6
sanrock
LQ Newbie
 
Registered: Dec 2011
Posts: 3

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by markush View Post
Hello sanrock, welcome to the forum,

please provide more information. Did it work before? on the same computer? which kernel are you using? (please post the output of
Code:
uname -a
Markus
Yes it worked before, here is the uname -a

$ uname -a
Linux san 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 15:27:15 UTC 2011 i686 GNU/Linux
 
Old 12-16-2011, 07:31 AM   #7
markush
Senior Member
 
Registered: Apr 2007
Location: Germany
Distribution: Slackware
Posts: 3,974

Rep: Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849
I would suspect that a more recent kernel can help. I don't think that a 2.6.32 Kernel can handle a 1TB disk.

Markus
 
Old 12-16-2011, 10:21 AM   #8
TB0ne
Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 15,071

Rep: Reputation: 2712Reputation: 2712Reputation: 2712Reputation: 2712Reputation: 2712Reputation: 2712Reputation: 2712Reputation: 2712Reputation: 2712Reputation: 2712Reputation: 2712
Quote:
Originally Posted by sanrock View Post
Hi kewpie
This is my backup hard drive which i take backups.. and i have 1TB of data in it.
Please help in resolving this
Thanks
Nope...still not urgent for anyone here, sorry.

And I think repo got it right....based on what you posted, it looks like the drive is dead/dying. Have you tried a different cable/enclosure?
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unable to mount USB external hard drive on Linux Lionlinux Linux - Newbie 15 09-30-2011 12:43 PM
Unable to mount USB external hard drive Irene Chan Linux - Newbie 11 03-13-2010 02:02 PM
Western digital 160gb external hard drive 2.5" usb s1‏ Vegas9 Linux - Laptop and Netbook 4 01-09-2009 07:59 PM
Unable to mount iStore USB External Hard Drive LupisYonderboy Linux - Newbie 3 10-20-2007 10:12 AM
" URGENT " Hard drive not detected while Installation pradeep_g5 Linux - Hardware 1 09-02-2007 10:50 AM


All times are GMT -5. The time now is 06:00 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration