LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (http://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   ....uncommon USB Bluetooth Issues on Suse 9.2 (http://www.linuxquestions.org/questions/linux-hardware-18/uncommon-usb-bluetooth-issues-on-suse-9-2-a-374670/)

papa_anarchia 10-19-2005 11:00 AM

....uncommon USB Bluetooth Issues on Suse 9.2
 
Hi,
iīm having a hard time getting my Broadcom USB Bluetooth-Stick to work with my Suse Linux 9.2 Desktop PC. I am running the same device/stick on my laptop with Suse Linux 9.3 without any trouble.

Here are my specs before I characterize my difficulties:

Suse 9.3 with Kernel 2.6.8-24.18-default and KDE

I installed:
bluez-libs-2.10-2
bluez-utils-2.10-15.1
kdebluetooth-0.0.cvs20040825-5.1

My Broadcom USB Dongle is recognized as:
Broadcom CCBT2035BDGP23-1

linux:~ # lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 015: ID 0a5c:200a Broadcom Corp.
Bus 001 Device 001: ID 0000:0000

my hcid.conf:

# HCId options
options {
autoinit yes;

security user;

pairing multi;

pin_helper /bin/bluepincat;
}

device {
# Local device name

name "Desktop %h (%d)";

class 0x100100

iscan enable;

pscan disable;

lm accept;

lp rswitch,hold,sniff,park;

auth enable;
encrypt enable;
}



My issues can be described as the following:

I can start kbluetoothd and occasionaly and scand for bluetooth devices.

linux:~ # hcitool scan
Scanning ...
00:60:57:AB:B1:6A Nokia 6600
00:0A:D9:E9:23:1F n/a
00:60:57:3B:0B:F9 Saqib DJ
00:A0:96:0B:D4:DB Pacemaker

Then, I try to do a service descovery on one of the found devices, preferably on device "Pacemaker".

linux:~ # sdptool browse 00:A0:96:0B:D4:DB
Browsing 00:A0:96:0B:D4:DB ...
Service Search failed: Software caused connection abort

Then, according to kbluetoothd the Bluetooth device just getīs disconnected and reconnected, as if I would un- and replug the dongle within itīs socket. Hitting the kbluetoothd-icon and therefore trying to inquire devices then just dumps:
"No working adapter was found. Only local service will be displayed."

My suggestion is, that this is due to possible further issues with my usb ...erm "stuff".

dmesg states the following:

usb 1-3: new full speed USB device using address 4
usb 1-3: Product: CCBT2035BDGP23-1
usb 1-3: Manufacturer: Broadcom
usb 1-3: SerialNumber: 000272C05480
hub 1-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
usb 1-3: USB disconnect, address 4
usb 1-3: new full speed USB device using address 5
usb 1-3: unable to read config index 0 descriptor/all
usb 1-3: can't read configurations, error -110
usb 1-3: new full speed USB device using address 6
usb 1-3: device descriptor read/all, error 8
ohci_hcd 0000:00:03.0: wakeup
usb 1-3: new full speed USB device using address 7
usb 1-3: Product: CCBT2035BDGP23-1
usb 1-3: Manufacturer: Broadcom
usb 1-3: SerialNumber: 000272C05480
hub 1-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
usb 1-3: USB disconnect, address 7
usb 1-3: new full speed USB device using address 8
usb 1-3: can't set config #1, error -110
usb 1-3: new full speed USB device using address 9
usb 1-3: Product: CCBT2035BDGP23-1
usb 1-3: Manufacturer: Broadcom
usb 1-3: SerialNumber: 000272C05480
hub 1-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
usb 1-3: USB disconnect, address 9
usb 1-3: new full speed USB device using address 10
usb 1-3: Product: CCBT2035BDGP23-1
usb 1-3: Manufacturer: Broadcom
usb 1-3: SerialNumber: 000272C05480
hci_usb_rx_complete: hci0 corrupted packet: type 4 count 1
hub 1-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
usb 1-3: USB disconnect, address 10
usb 1-3: new full speed USB device using address 11
usb 1-3: unable to read config index 0 descriptor/all
usb 1-3: can't read configurations, error -110
usb 1-3: new full speed USB device using address 12
usb 1-3: device descriptor read/all, error 8
ohci_hcd 0000:00:03.0: wakeup
usb 1-3: new full speed USB device using address 13
usb 1-3: Product: CCBT2035BDGP23-1
usb 1-3: Manufacturer: Broadcom
usb 1-3: SerialNumber: 000272C05480
hub 1-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
usb 1-3: USB disconnect, address 13
usb 1-3: new full speed USB device using address 14
usb 1-3: Product: CCBT2035BDGP23-1
usb 1-3: Manufacturer: Broadcom
usb 1-3: SerialNumber: 000272C05480
hci_usb_rx_complete: hci0 corrupted packet: type 4 count 1
hub 1-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
usb 1-3: USB disconnect, address 14
usb 1-3: new full speed USB device using address 15
usb 1-3: Product: CCBT2035BDGP23-1
usb 1-3: Manufacturer: Broadcom
usb 1-3: SerialNumber: 000272C05480
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
hub 1-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
usb 1-3: USB disconnect, address 15
usb 1-3: new full speed USB device using address 16
usb 1-3: Product: CCBT2035BDGP23-1
usb 1-3: Manufacturer: Broadcom
usb 1-3: SerialNumber: 000272C05480
hub 1-0:1.0: port 3 disabled by hub (EMI?), re-enabling...
usb 1-3: USB disconnect, address 16
usb 1-3: new full speed USB device using address 17
usb 1-3: device descriptor read/all, error -110
usb 1-3: new full speed USB device using address 18
usb 1-3: unable to read config index 0 descriptor/all
usb 1-3: can't read configurations, error -110

..this goes on and on an on. Dongle is disconnected (according to kbluetoothd) and connected again.


and even more verbose, /var/log/messages gets filled with:

Oct 19 16:35:18 linux hid2hci: resmgr: server response code 500
Oct 19 16:35:19 linux last message repeated 2 times
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 501
Oct 19 16:35:19 linux last message repeated 2 times
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 500
Oct 19 16:35:19 linux last message repeated 3 times
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 501
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 501
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 500
Oct 19 16:35:19 linux last message repeated 4 times
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 501
Oct 19 16:35:19 linux last message repeated 2 times
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 500
Oct 19 16:35:19 linux last message repeated 3 times
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 501
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 501
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 500
Oct 19 16:35:19 linux last message repeated 4 times
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 501
Oct 19 16:35:19 linux last message repeated 2 times
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 500
Oct 19 16:35:19 linux last message repeated 3 times
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 501
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 501
Oct 19 16:35:19 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:40 linux kernel: hub 1-0:1.0: port 3 disabled by hub (EMI?
), re-enabling...
Oct 19 16:36:40 linux kernel: usb 1-3: USB disconnect, address 4
Oct 19 16:36:40 linux hcid[5010]: HCI dev 0 down
Oct 19 16:36:40 linux hcid[5010]: Stoping security manager 0
Oct 19 16:36:40 linux hcid[5010]: HCI dev 0 unregistered
Oct 19 16:36:40 linux /sbin/hotplug[6137]: unknown command
Oct 19 16:36:40 linux /sbin/hotplug[6138]: unknown command
Oct 19 16:36:40 linux /sbin/hotplug[6139]: unknown command
Oct 19 16:36:40 linux /sbin/hotplug[6140]: unknown command
Oct 19 16:36:40 linux kernel: usb 1-3: new full speed USB device using
address 5
Oct 19 16:36:41 linux kernel: usb 1-3: Product: CCBT2035BDGP23-1
Oct 19 16:36:41 linux kernel: usb 1-3: Manufacturer: Broadcom
Oct 19 16:36:41 linux kernel: usb 1-3: SerialNumber: 000272C05480
Oct 19 16:36:41 linux hcid[5010]: HCI dev 0 registered
Oct 19 16:36:41 linux hcid[5010]: HCI dev 0 up
Oct 19 16:36:41 linux hcid[5010]: Starting security manager 0
Oct 19 16:36:42 linux sdpd[6294]: init_server: binding L2CAP socket: Ad
dress already in use
Oct 19 16:36:42 linux sdpd[6294]: main: Server initialization failed
Oct 19 16:36:42 linux /sbin/hotplug[6211]: Can't listen on HID control
channel: Address already in use
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:42 linux last message repeated 2 times
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:42 linux last message repeated 2 times
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:42 linux last message repeated 3 times
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:42 linux last message repeated 4 times
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:42 linux last message repeated 2 times
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:42 linux last message repeated 3 times
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:42 linux last message repeated 4 times
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:42 linux last message repeated 2 times
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:42 linux last message repeated 3 times
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:42 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:48 linux kernel: hub 1-0:1.0: port 3 disabled by hub (EMI?
), re-enabling...
Oct 19 16:36:48 linux kernel: usb 1-3: USB disconnect, address 5
Oct 19 16:36:48 linux hcid[5010]: HCI dev 0 down
Oct 19 16:36:48 linux hcid[5010]: Stoping security manager 0
Oct 19 16:36:49 linux hcid[5010]: HCI dev 0 unregistered
Oct 19 16:36:49 linux /sbin/hotplug[6507]: unknown command
Oct 19 16:36:49 linux /sbin/hotplug[6508]: unknown command
Oct 19 16:36:49 linux /sbin/hotplug[6509]: unknown command
Oct 19 16:36:49 linux /sbin/hotplug[6510]: unknown command
Oct 19 16:36:49 linux kernel: usb 1-3: new full speed USB device using
address 6
Oct 19 16:36:49 linux kernel: usb 1-3: Product: CCBT2035BDGP23-1
Oct 19 16:36:49 linux kernel: usb 1-3: Manufacturer: Broadcom
Oct 19 16:36:49 linux kernel: usb 1-3: SerialNumber: 000272C05480
Oct 19 16:36:49 linux hcid[5010]: HCI dev 0 registered
Oct 19 16:36:49 linux hcid[5010]: HCI dev 0 up
Oct 19 16:36:49 linux hcid[5010]: Starting security manager 0
Oct 19 16:36:50 linux sdpd[6666]: init_server: binding L2CAP socket: Ad
dress already in use
Oct 19 16:36:50 linux sdpd[6666]: main: Server initialization failed
Oct 19 16:36:50 linux /sbin/hotplug[6583]: Can't listen on HID control
channel: Address already in use
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:50 linux last message repeated 2 times
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:50 linux last message repeated 2 times
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:50 linux last message repeated 3 times
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:50 linux last message repeated 4 times
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:50 linux last message repeated 2 times
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:50 linux last message repeated 3 times
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:50 linux last message repeated 4 times
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:50 linux last message repeated 2 times
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 500
Oct 19 16:36:50 linux last message repeated 3 times
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 501
Oct 19 16:36:50 linux hid2hci: resmgr: server response code 500



Maybe I should have posted this within the noobīs section, hm?
Many thanks for any suggestions.

jcs32 11-01-2005 05:41 PM

I have the same problem, but on a Gentoo Box (kernel 2.6.12), AMD 4400+, 4 GB RAM
when connecting a USB hard-disk.
Doesn't always freeze the system, sometimes I can even access some data, but not for long.


All times are GMT -5. The time now is 06:27 PM.