I am running Mandriva Spring 2009.1 and attempting to get my Linksys WUSB54GC wireless adapter to connect to my Linksys router. I have the card installed(I think anyway) using ndiswrapper and the rt73 driver.
When I configure my network setting through the wizard, I get a generic "Connection error" dialog box. Directly below is my dmesg output after this error. I think I recall reading a thread over the past few days about protocol on this forum for Linux & Wireless forum posts, and what needs to be in them, but I can't seem to locate it right now. So if more info is needed, please let me know. Thanks!
Code:
usb 2-3: device descriptor read/64, error -110
usb 2-3: new high speed USB device using ehci_hcd and address 6
usb 2-3: device descriptor read/8, error -110
usb 2-3: device descriptor read/8, error -110
usb 2-3: new high speed USB device using ehci_hcd and address 7
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39621 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
usb 2-3: device descriptor read/8, error -110
usb 2-3: device descriptor read/8, error -71
hub 2-0:1.0: unable to enumerate USB device on port 3
usb 2-3: new high speed USB device using ehci_hcd and address 8
usb 2-3: New USB device found, idVendor=13b1, idProduct=0020
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Compact Wireless-G USB Adapter
usb 2-3: Manufacturer: Cisco-Linksys
usb 2-3: configuration #1 chosen from 1 choice
usb 2-3: reset high speed USB device using ehci_hcd and address 8
wlan0 (ndiswrapper): not using net_device_ops yet
wlan0: ethernet device 00:1d:7e:03:be:d5 using NDIS driver: rt73, version: 0x0, NDIS version: 0x500, vendor: 'Compact Wireless-G USB Adapter', 13B1:0020.F.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
cfg80211: Calling CRDA for country: US
ndiswrapper (add_wep_key:825): invalid key length (63)
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39637 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
wlan0: no IPv6 routers present
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39666 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39695 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
ndiswrapper (add_wep_key:848): adding encryption key 1 failed (C0010015)
ndiswrapper (add_wep_key:848): adding encryption key 1 failed (C0010015)
cfg80211: Calling CRDA for country: US
ndiswrapper (add_wep_key:825): invalid key length (63)
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39721 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
wlan0: no IPv6 routers present
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39750 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39779 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39812 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39845 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39872 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39899 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39919 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39935 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
ndiswrapper (add_wep_key:848): adding encryption key 1 failed (C0010015)
ndiswrapper (add_wep_key:848): adding encryption key 1 failed (C0010015)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: Calling CRDA for country: US
ndiswrapper (add_wep_key:825): invalid key length (63)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=39996 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
wlan0: no IPv6 routers present
Shorewall:net2fw:DROP:IN=eth1 OUT= MAC=00:02:b3:32:8a:25:00:0f:db:22:bd:21:08:00 SRC=192.168.1.1 DST=192.168.1.43 LEN=36 TOS=0x00 PREC=0x00 TTL=64 ID=40023 PROTO=ICMP TYPE=8 CODE=0 ID=65440 SEQ=0
***Also, what is Shorewall in these logs? Firewall? Where can I access the firewall config in Mandrake 2009? In the log above, what is SRC(source) and what is DST(destination)?
Screenshots attached if interested.
