ttyUSB0 not found | no driver ftdi-sio
Hello,
I have an easymouse 2 USB-serial card reader. It worked perfectly with Openelec 4x. Since the update to Openelec 5x I can't access the easymouse. I see under dev the /ttyUSB0 device but can access it. When I plug the usb reader off and on I can't see the usb device with dmesg | grep tty. When I'm using lsusb I can see the device: Code:
Bus 003 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC I see the following: Code:
T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 modprobe ftdi_sio.ko gives me Code:
modprobe: FATAL: Module ftdi_sio.ko not found. |
The ftdi site has driver.
|
modprobe ftdi_sio works fine.
I don't know why it didn't load after update from 5.x of openelec. I added it in autostart via the following command: echo "modprobe ftdi_sio" >> /storage/.config/autostart.sh |
All times are GMT -5. The time now is 10:35 PM. |