-   Linux - Hardware (
-   -   Touchscreen Fujitsu USB (

JoseLP 06-24-2008 07:18 PM

Touchscreen Fujitsu USB
I'm trying to set up a team POS (point of sale), which has the following configuration:
*Motherboard with Chipset VIA ,
*Printer thermal ,
*Touchscreen Fujitsu USB, type Resistive,
*Smart card,
*Ports for connect keyboard, mouse , usb memory.

Distribution to use: Fedora Core 8

The original idea is not using the keyboard or mouse, just use the touch screen.

Touchscreen configuration:
Use the drivers (Fujitsu, Wacom ,etc) which does not work.
The manual configuration said to be modify the xorg.conf.
For example:
Section InputDevice
Option "Device" "/dev/eventX"

where X is ( 0 ,1,2,..)

Reviewing the command output " cat /proc/bus/input/devices" , but the touchscreen device did not appear.
The command lsusb shows the following:
Bus 002 Device 002: ID 0664:030a (touchscreen Fujitsu USB)

The command output "/proc/bus/usb/devices" shows the following:

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0664 ProdID=030a Rev= 1.01
S: Manufacturer=ET&T
S: Product=USB 7WUSB
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 5 Ivl=7ms

The question I have is how to allocate an eventX to touch device to set this device in the xorg.conf

I thank the recommendations can provide.

I apologize for my wording in English.

All times are GMT -5. The time now is 10:28 AM.