LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 01-24-2008, 02:00 PM   #1
cferron
Member
 
Registered: Jan 2006
Location: Trois-Rivières, Québec, Canada
Distribution: Slackware, Ubuntu
Posts: 74

Rep: Reputation: 15
Question Toshiba laptop ACPI sleep issues KDE


Hello,

I had my ACPI configuration working alright with KDE until I did something I don't know Before when everything worked, I would close the lid and laptop would go to sleep (flashing light) when lid opened, I had to press power button to wake the laptop and start working again...

Now, when I do the same thing, the laptop goes out of sleep, but fan is very noisy + I don<t get any screen (it is black). I have to shutdown the unit by holding the power button. When I power on the computer, NOTHING. What I have to do is remove the battery + the AC cable in order to get the BIOS prompt.

Where to start....???

uname -a
Linux toshiba 2.6.21.5-smp #10 SMP Wed Jan 23 14:28:38 EST 2008 i686 Intel(R) Celeron(R) M CPU 430 @ 1.73GHz GenuineIntel GNU/Linux

dmesg
Code:
Linux version 2.6.21.5-smp (root@toshiba) (gcc version 4.1.2) #10 SMP Wed Jan 23 14:28:38 EST 2008
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009dc00 end: 000000000009dc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009dc00 size: 0000000000002400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000dc000 size: 0000000000004000 end: 00000000000e0000 type: 2
copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 0000000037d80000 end: 0000000037e80000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 0000000037e80000 size: 0000000000012000 end: 0000000037e92000 type: 3
copy_e820_map() start: 0000000037e92000 size: 000000000006e000 end: 0000000037f00000 type: 4
copy_e820_map() start: 0000000037f00000 size: 0000000000100000 end: 0000000038000000 type: 2
copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000037e80000 (usable)
 BIOS-e820: 0000000037e80000 - 0000000037e92000 (ACPI data)
 BIOS-e820: 0000000037e92000 - 0000000037f00000 (ACPI NVS)
 BIOS-e820: 0000000037f00000 - 0000000038000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
894MB LOWMEM available.
found SMP MP-table at 000f7c60
Entering add_active_range(0, 0, 228992) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   228992
  HighMem    228992 ->   228992
early_node_map[1] active PFN ranges
    0:        0 ->   228992
On node 0 totalpages: 228992
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1757 pages used for memmap
  Normal zone: 223139 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7BB0, 0014 (r0 TOSINV)
ACPI: RSDT 37E8B02C, 0040 (r1 TOSINV TOSINV00  6040000  LTP        0)
ACPI: FACP 37E91D8A, 0074 (r1 TOSINV Bonefish  6040000 ATI     F4240)
ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r1 C-state control [20070126]
ACPI: DSDT 37E8BD56, 6034 (r1 TOSINV    SB450  6040000 MSFT  100000E)
ACPI: FACS 37E92FC0, 0040
ACPI: APIC 37E91DFE, 0050 (r1 TOSINV     APIC    6040000  LTP        0)
ACPI: SLIC 37E91E4E, 0176 (r1 TOSINV TOSINV00  6040000  INV        0)
ACPI: MCFG 37E91FC4, 003C (r1 TOSINV   MCFG    6040000  LTP        0)
ACPI: SSDT 37E8B83E, 0518 (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
ACPI: SSDT 37E8B5DF, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050228)
ACPI: SSDT 37E8B06C, 0573 (r1  PmRef    CpuPm     3000 INTL 20050228)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 38000000:a8000000)
Built 1 zonelists.  Total pages: 227203
Kernel command line: BOOT_IMAGE=Linux-OK ro root=801
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1729.092 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902100k/915968k available (3559k kernel code, 13420k reserved, 1225k data, 232k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff83000 - 0xfffff000   ( 496 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf7e80000   ( 894 MB)
      .init : 0xc05b5000 - 0xc05ef000   ( 232 kB)
      .data : 0xc0479cbd - 0xc05ac32c   (1225 kB)
      .text : 0xc0100000 - 0xc0479cbd   (3559 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3491.38 BogoMIPS (lpj=6982768)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 0000c109 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9fbff 00000000 00000000 00002940 0000c109 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Celeron(R) M CPU        430  @ 1.73GHz stepping 08
Total of 1 processors activated (3491.38 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
ACPI: Power Resource [FN00] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
pnp: 00:08: ioport range 0x220-0x22f has been reserved
pnp: 00:08: ioport range 0x400-0x401 has been reserved
pnp: 00:08: ioport range 0x40b-0x40b has been reserved
pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:09: iomem range 0x0-0xfff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: c0000000-c00fffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:04.0
  IO window: disabled.
  MEM window: c0100000-c01fffff
  PREFETCH window: disabled.
PCI: Bus 6, cardbus bridge: 0000:05:06.0
  IO window: 0000a800-0000a8ff
  IO window: 0000ac00-0000acff
  PREFETCH window: 40000000-43ffffff
  MEM window: 48000000-4bffffff
PCI: Bridge: 0000:00:14.4
  IO window: a000-afff
  MEM window: c0200000-c02fffff
  PREFETCH window: 40000000-43ffffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Enabling device 0000:05:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 23 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:52fd
vesafb: pmi: set display start = c00c536b, set palette = c00c53a5
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FAN0] to D3
ACPI: Transitioning device [FAN0] to D3
ACPI: Fan [FAN0] (off)
set_level status: 0
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: Thermal Zone [TZ00] (48 C)
ACPI: Invalid passive threshold
ACPI: Transitioning device [FAN0] to D0
ACPI: Transitioning device [FAN0] to D0
ACPI: Unable to turn cooling device [f7e0643c] 'on'
ACPI: Thermal Zone [TZ01] (44 C)
Real Time Clock Driver v1.12ac
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:05:07.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:05:07.0[A] -> GSI 20 (level, low) -> IRQ 17
eth0: RealTek RTL8139 at 0xa000, 00:a0:d1:65:8d:62, IRQ 17
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ath_rate_sample: 1.2 (0.9.3.2)
ath_rate_onoe: 1.0 (0.9.3.2)
ath_rate_amrr: 0.1 (0.9.3.2)
ath_pci: 0.9.4.5 (0.9.3.2)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.0 to 64
Switched to high resolution mode on CPU 0
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 10.0 phy 6.1 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
failed to automatically load module: wlan_scan_sta; errno: -2
unable to load wlan_scan_sta
wifi0: Atheros 5424/2424: mem=0xc0100000, irq=18
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (0.9.3.2)
wlan: mac acl policy registered
input: Macintosh mouse button emulation as /class/input/input3
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
ATIIXP: chipset revision 128
ATIIXP: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8460-0x8467, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x8468-0x846f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
Time: acpi_pm clocksource has been installed.
Probing IDE interface ide1...
hdc: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-724.
SCSI Media Changer driver v0.25
sata_sil 0000:00:12.0: version 2.1
PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 19
ata1: SATA max UDMA/100 cmd 0xf881a080 ctl 0xf881a08a bmdma 0xf881a000 irq 19
ata2: SATA max UDMA/100 cmd 0xf881a0c0 ctl 0xf881a0ca bmdma 0xf881a008 irq 19
scsi0 : sata_sil
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC7DP, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi1 : sata_sil
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input4
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: sda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 7569596
ext3_orphan_cleanup: deleting unreferenced inode 7569595
EXT3-fs: sda1: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 232k freed
Linux agpgart interface v0.102 (c) Dave Jones
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
ohci_hcd: disagrees about version of symbol usb_hcd_resume_root_hub
ohci_hcd: Unknown symbol usb_hcd_resume_root_hub
ohci_hcd: disagrees about version of symbol usb_hcd_giveback_urb
ohci_hcd: Unknown symbol usb_hcd_giveback_urb
ohci_hcd: disagrees about version of symbol usb_hcd_poll_rh_status
ohci_hcd: Unknown symbol usb_hcd_poll_rh_status
ohci_hcd: disagrees about version of symbol usb_root_hub_lost_power
ohci_hcd: Unknown symbol usb_root_hub_lost_power
ohci_hcd: disagrees about version of symbol usb_hcd_resume_root_hub
ohci_hcd: Unknown symbol usb_hcd_resume_root_hub
ohci_hcd: disagrees about version of symbol usb_hcd_giveback_urb
ohci_hcd: Unknown symbol usb_hcd_giveback_urb
ohci_hcd: disagrees about version of symbol usb_hcd_poll_rh_status
ohci_hcd: Unknown symbol usb_hcd_poll_rh_status
ohci_hcd: disagrees about version of symbol usb_root_hub_lost_power
ohci_hcd: Unknown symbol usb_root_hub_lost_power
ehci_hcd: disagrees about version of symbol usb_free_urb
ehci_hcd: Unknown symbol usb_free_urb
ehci_hcd: disagrees about version of symbol usb_hub_tt_clear_buffer
ehci_hcd: Unknown symbol usb_hub_tt_clear_buffer
ehci_hcd: disagrees about version of symbol usb_hcd_resume_root_hub
ehci_hcd: Unknown symbol usb_hcd_resume_root_hub
ehci_hcd: disagrees about version of symbol usb_get_urb
ehci_hcd: Unknown symbol usb_get_urb
ehci_hcd: disagrees about version of symbol usb_hcd_giveback_urb
ehci_hcd: Unknown symbol usb_hcd_giveback_urb
ehci_hcd: disagrees about version of symbol usb_hcd_poll_rh_status
ehci_hcd: Unknown symbol usb_hcd_poll_rh_status
ehci_hcd: disagrees about version of symbol usb_root_hub_lost_power
ehci_hcd: Unknown symbol usb_root_hub_lost_power
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18
ieee1394: Initialized config rom entry `ip1394'
hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
ACPI: PCI Interrupt 0000:05:0a.0[A] -> GSI 22 (level, low) -> IRQ 19
[fglrx] Maximum main memory to use for locked dma buffers: 801 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.44.3 [Dec 19 2007] on minor 0
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[c0200000-c02007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Yenta: CardBus bridge found at 0000:05:06.0 [1179:ff10]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:05:06.0, mfunc 0x01111002, devctl 0x44
Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
Adding 2642652k swap on /dev/sda5.  Priority:-1 extents:1 across:2642652k
ACPI: Transitioning device [FAN0] to D0
ACPI: Transitioning device [FAN0] to D0
ACPI: Unable to turn cooling device [f7e0643c] 'on'
ACPI: Transitioning device [FAN0] to D0
ACPI: Transitioning device [FAN0] to D0
ACPI: Unable to turn cooling device [f7e0643c] 'on'
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080da0d1658d62]
EXT3 FS on sda1, internal journal
input: PC Speaker as /class/input/input5
input: PS/2 Synaptics TouchPad as /class/input/input6
Capability LSM initialized
ohci_hcd: disagrees about version of symbol usb_hcd_resume_root_hub
ohci_hcd: Unknown symbol usb_hcd_resume_root_hub
ohci_hcd: disagrees about version of symbol usb_hcd_giveback_urb
ohci_hcd: Unknown symbol usb_hcd_giveback_urb
ohci_hcd: disagrees about version of symbol usb_hcd_poll_rh_status
ohci_hcd: Unknown symbol usb_hcd_poll_rh_status
ohci_hcd: disagrees about version of symbol usb_root_hub_lost_power
ohci_hcd: Unknown symbol usb_root_hub_lost_power
ohci_hcd: disagrees about version of symbol usb_hcd_resume_root_hub
ohci_hcd: Unknown symbol usb_hcd_resume_root_hub
ohci_hcd: disagrees about version of symbol usb_hcd_giveback_urb
ohci_hcd: Unknown symbol usb_hcd_giveback_urb
ohci_hcd: disagrees about version of symbol usb_hcd_poll_rh_status
ohci_hcd: Unknown symbol usb_hcd_poll_rh_status
ohci_hcd: disagrees about version of symbol usb_root_hub_lost_power
ohci_hcd: Unknown symbol usb_root_hub_lost_power
ehci_hcd: disagrees about version of symbol usb_free_urb
ehci_hcd: Unknown symbol usb_free_urb
ehci_hcd: disagrees about version of symbol usb_hub_tt_clear_buffer
ehci_hcd: Unknown symbol usb_hub_tt_clear_buffer
ehci_hcd: disagrees about version of symbol usb_hcd_resume_root_hub
ehci_hcd: Unknown symbol usb_hcd_resume_root_hub
ehci_hcd: disagrees about version of symbol usb_get_urb
ehci_hcd: Unknown symbol usb_get_urb
ehci_hcd: disagrees about version of symbol usb_hcd_giveback_urb
ehci_hcd: Unknown symbol usb_hcd_giveback_urb
ehci_hcd: disagrees about version of symbol usb_hcd_poll_rh_status
ehci_hcd: Unknown symbol usb_hcd_poll_rh_status
ehci_hcd: disagrees about version of symbol usb_root_hub_lost_power
ehci_hcd: Unknown symbol usb_root_hub_lost_power
eth0: link down
eth0: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ath0: no IPv6 routers present
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 20
[fglrx] GART Table is not in FRAME_BUFFER range
[fglrx] Reserve Block - 0 offset =  0X0 length = 0X40000
[fglrx] Reserve Block - 1 offset =  0X7ff5000 length = 0Xb000
set_level status: 0
set_level status: 0
set_level status: 0
[fglrx] PCIe has already been initialized. Reinitializing ...
[fglrx] GART Table is not in FRAME_BUFFER range
[fglrx] Reserve Block - 0 offset =  0X0 length = 0X40000
[fglrx] Reserve Block - 1 offset =  0X7ff5000 length = 0Xb000
If you need more stuff tell me...
Thanks

Claude
 
  


Reply

Tags
acpi, sleep, state, working


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slackware11 - ACPI Sleep States - Laptop SmearedBlackInk Slackware 3 10-10-2006 03:20 AM
Problems with acpi/sleep/suspend on laptop kierse Linux - Hardware 4 03-08-2005 12:19 AM
sleep / suspend / hibernate on Toshiba laptop (satellite 2410) cpbl Linux - Laptop and Netbook 0 01-16-2005 12:55 PM
Sound and ACPI issues on a Toshiba A60 Satellite laptop Fenster Fedora 9 10-18-2004 07:25 PM
RedHat 9: How to use ACPI functions on a Toshiba Laptop? digsy Linux - Newbie 35 05-16-2003 11:46 PM


All times are GMT -5. The time now is 12:49 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration