Dear all,
I have a tape which is detected as '/dev/st0' . When I tried to write the tar output it says 'input/output error'.
('tar -cvf /dev/st0 /tmp')
when I tried 'mt -f /dev/st0 rewind' it says 'no medium found'.
Actually the tape is inserted inside the tray .
Any help!!.
dmesg :
Quote:
ch 0:0:4:1: Attached scsi changer ch0
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
st: Version 20050830, fixed bufsize 32768, s/g segs 256
st 0:0:4:0: Attached scsi tape st0
st0: try direct i/o: yes (alignment 512 B)
st 0:0:4:0: Attached scsi generic sg0 type 1
ch 0:0:4:1: Attached scsi generic sg1 type 8
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
|
lspci :
Quote:
0c:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev c1)
|
lsmod :
Quote:
shpchp 42156 0
pci_hotplug 20872 1 shpchp
sg 40744 0
st 43428 0
evdev 15360 2
ext3 138512 4
jbd 65392 1 ext3
mbcache 14216 1 ext3
usbhid 45088 0
ch 21004 0
ide_cd 45088 0
cdrom 40488 1 ide_cd
generic 11396 0 [permanent]
mptspi 22672 1
mptscsih 29184 1 mptspi
mptbase 56672 2 mptspi,mptscsih
cciss 64776 6
scsi_transport_spi 31488 1 mptspi
|