LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 12-02-2007, 12:35 PM   #1
Erik_FL
Member
 
Registered: Sep 2005
Location: Boynton Beach, FL
Distribution: Slackware
Posts: 801

Rep: Reputation: 247Reputation: 247Reputation: 247
Synaptics Touchpad on Acer Aspire 5050 - Slackware


This is sort of a last resort attempt to see if anyone has suggestions about how to solve the problem. I have done a lot of searching and tried a few things. I promise not to dismiss any suggestions with "tried that" or some other irritating response. Maybe I missed something obvious.

One thing that I did notice from "cat /proc/bus/input/devices" is that the synaptics is identified as "PS/2 Synaptics TouchPad". The "trouble-shooting.txt" file that came with the driver has the following comment that was not very helpful.

Quote:
If you are using a 2.6 linux kernel, check the /proc/bus/input/devices
file. The touchpad must be identified a "SynPS/2 Synaptics TouchPad"
or an "AlpsPS/2 ALPS TouchPad". If it is identified as a "PS/2 Generic
Mouse" or "PS/2 Synaptics TouchPad", something is wrong.
It does not say what "something" could be wrong in that case.

Hardware:

Acer Aspire 5050 laptop
Synaptics Touchpad

Software:

Slackware Linux 12.0 (kernel 2.6.21.5)
Linux eriklnxpc5 2.6.21.5 #3 Sat Dec 1 23:33:34 EST 2007 i686 AMD Turion(tm) 64 Mobile Technology MK-38 AuthenticAMD GNU/Linux

Syaptics Driver version 0.14.6

Symptoms:

The touchpad operates as a "dumb" mouse and the Synaptics driver does not load when X Windows is started.

Some things that I've tried:

I tried using the "i8042.nomux" option for the kernel at boot. It had no effect on the problem.

I tried compiling "evdev" in the kernel, or as a separate module, since some people could only get it to work as a module.

I tried using alternate device names in "xorg.conf".
/dev/psaux
/dev/input/mice
/dev/input/mouse1
/dev/input/mouse0
/dev/mouse

I tried different options in the "ServerLayout" section of "xorg.conf".
InputDevice "Synaptics Mouse" "AlwaysCore"
or
InputDevice "Synaptics Mouse" "CorePointer"

I verified that I can get input from the Syanptics device.
cat /dev/input/mouse1
Moving the mouse caused characters to be displayed when I used the above command.

I tried using this option for the Synaptics configuration in "xorg.conf".
Option "Repeater" "/dev/ps2mouse"


The rest of this post is related information. If you want to see other information, let me know and I'll post it. I appreciate any suggestions or information that you are able to provide.

Contents of Xorg.0.log
Code:
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Slackware 12.0 Slackware Linux Project
Current Operating System: Linux eriklnxpc5 2.6.21.5 #3 Sat Dec 1 23:33:34 EST 2007 i686
Build Date: 09 May 2007
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec  2 11:37:12 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Synaptics Mouse"
(**) |-->Input Device "Keyboard0"
(==) |-->Input Device "<default pointer>"
(WW) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.

SNIP!...

(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 4.3.99.902, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 6.6.192
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.2.99.905, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.1.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7

SNIP!...

(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) Synaptics touchpad driver version 0.14.6 (1406)
Synaptics Mouse no synaptics event device found (checked 18 nodes)
(**) Option "Device" "/dev/psaux"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "EmulateMidButtonTime" "250"
(**) Option "VertScrollDelta" "100"
(**) Option "VertEdgeScroll" "on"
(**) Option "HorizEdgeScroll" "on"
(**) Option "LockedDrags" "on"
(**) Option "RTCornerButton" "7"
(**) Option "LTCornerButton" "6"
Query no Synaptics: 6003C8
(EE) Synaptics Mouse no synaptics touchpad detected and no repeater device
(EE) Synaptics Mouse Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "Synaptics Mouse"
(II) UnloadModule: "synaptics"
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard0: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: Core Pointer
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(**) RADEON(0): RADEONSaveScreen(2)
Contents of /etc/X11/xorg.conf
Code:
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
#	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Synaptics Mouse" "AlwaysCore"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/share/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/OTF"
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/75dpi/:unscaled"
EndSection

Section "Module"
	Load  "GLcore"
	Load  "dbe"
	Load  "glx"
	Load  "dri"
	Load  "record"
	Load  "xtrap"
	Load  "extmod"
	Load  "type1"
	Load  "freetype"
	Load  "synaptics"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option       "XkbModel"  "pc101"
	Option       "XkbLayout"  "us"
EndSection

#Section "InputDevice"
#	Identifier  "Mouse0"
#	Driver      "mouse"
#	Option	    "Protocol" "auto"
#	Option	    "Device" "/dev/input/mice"
#	Option	    "ZAxisMapping" "4 5 6 7"
#EndSection

Section "InputDevice"
  Identifier  	"Synaptics Mouse"
  Driver  	"synaptics"
  Option 	"Device"  	"/dev/psaux"
  Option	"Protocol"	"auto-dev"
  Option	"LeftEdge"      "1700"
  Option	"RightEdge"     "5300"
  Option	"TopEdge"       "1700"
  Option	"BottomEdge"    "4200"
  Option	"FingerLow"	"25"
  Option	"FingerHigh"	"30"
  Option	"MaxTapTime"	"180"
  Option	"MaxTapMove"	"220"
  Option	"VertScrollDelta" "100"
  Option	"MinSpeed"	"0.09"
  Option	"MaxSpeed"	"0.18"
  Option	"AccelFactor"	"0.0015"
  Option	"SHMConfig"	"on"
#  Option	"Repeater"	"/dev/ps2mouse"
  Option	"LTCornerButton" "6"
  Option	"RTCornerButton" "7"
  Option	"LockedDrags" "on"
  Option	"VertEdgeScroll" "on"
  Option	"HorizEdgeScroll" "on"
  Option	"EmulateMidButtonTime" "250"
		


EndSection

Section "Monitor"
	#DisplaySize	  300   190	# mm
	Identifier   "Monitor0"
	VendorName   "CMO"
	ModelName    "1409"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "DDCMode"            	# [<bool>]
        #Option     "MonitorLayout"      	# [<str>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "MergedFB"           	# [<bool>]
        #Option     "CRT2HSync"          	# [<str>]
        #Option     "CRT2VRefresh"       	# [<str>]
        #Option     "CRT2Position"       	# [<str>]
        #Option     "MetaModes"          	# [<str>]
        #Option     "MergedDPI"          	# [<str>]
        #Option     "MergedXinerama"     	# [<bool>]
        #Option     "MergedXineramaCRT2IsScreen0" 	# [<bool>]
        #Option     "MergedNonRectangular" 	# [<bool>]
        #Option     "MergedMouseRestriction" 	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "ConstantDPI"        	# [<bool>]
        #Option     "ReverseDisplay"     	# [<bool>]
        #Option     "DRI"                	# [<bool>]
	Identifier  "Card0"
	Driver      "ati"
	VendorName  "ATI Technologies Inc"
	BoardName   "RS485 [Radeon Xpress 1100 IGP]"
	BusID       "PCI:1:5:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 24
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
Output of "lspci":
Code:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc 4379 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP]
02:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)
08:01.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
08:01.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
08:01.2 Generic system peripheral [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
08:01.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
08:01.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Output of "cat /proc/bus/input/devices"
Code:
I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=button_power/button/input0
S: Sysfs=/class/input/input0
H: Handlers=kbd event0 
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/class/input/input1
H: Handlers=kbd event1 
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/class/input/input2
H: Handlers=event2 
B: EV=21
B: SW=1

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/class/input/input3
H: Handlers=kbd event3 
B: EV=3
B: KEY=4000 0 0 0 0

I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/class/input/input4
H: Handlers=mouse0 event4 
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input5
H: Handlers=kbd event5 
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input6
H: Handlers=kbd event6 
B: EV=40001
B: SND=6

I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Synaptics TouchPad"
P: Phys=isa0060/serio4/input0
S: Sysfs=/class/input/input7
H: Handlers=mouse1 event7 
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
Output from "lsmod":
Code:
Module                  Size  Used by
radeon                119712  0 
drm                    69204  1 radeon
snd_seq_dummy           2564  0 
snd_seq_oss            27648  0 
snd_seq_midi_event      5760  1 snd_seq_oss
snd_seq                42704  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          6284  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            37984  0 
snd_mixer_oss          13696  1 snd_pcm_oss
ipv6                  222112  10 
acer_acpi               8524  0 
capability              3144  0 
commoncap               5120  1 capability
ndiswrapper           171484  0 
lp                      9416  0 
parport_pc             23396  0 
parport                29704  2 lp,parport_pc
pcspkr                  2112  0 
psmouse                34248  0 
serio_raw               4996  0 
8139too                20672  0 
sdhci                  14028  0 
mii                     4480  1 8139too
mmc_core               21140  1 sdhci
snd_hda_intel          15512  1 
snd_hda_codec         205760  1 snd_hda_intel
snd_pcm                65224  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer              17348  2 snd_seq,snd_pcm
snd                    41764  11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore               5408  1 snd
ati_agp                 6668  0 
snd_page_alloc          7304  2 snd_hda_intel,snd_pcm
agpgart                26608  2 drm,ati_agp
shpchp                 28564  0 
i2c_piix4               7116  0 
sg                     25372  0 
pata_atiixp             5312  0 
ata_generic             5060  0 
evdev                   7616  5

Last edited by Erik_FL; 12-02-2007 at 12:38 PM.
 
Old 12-02-2007, 06:56 PM   #2
Peacedog
Guru
 
Registered: Sep 2003
Location: Danville, VA
Distribution: Slackware, Windows, FreeBSD, OpenBSD, Mac OS X
Posts: 5,292

Rep: Reputation: 167Reputation: 167
Hi Erik_FL, You may find the answer in this thread. Hope that helps.
Good luck. ;-)
 
Old 12-02-2007, 10:47 PM   #3
Erik_FL
Member
 
Registered: Sep 2005
Location: Boynton Beach, FL
Distribution: Slackware
Posts: 801

Original Poster
Rep: Reputation: 247Reputation: 247Reputation: 247
Quote:
Originally Posted by Peacedog View Post
Hi Erik_FL, You may find the answer in this thread. Hope that helps.
Good luck. ;-)
Thanks very much! That did solve the problem.
Everything except for my softmodem is now working with Linux on my laptop.
The Linux user community is one thing that makes me really love Linux.
 
Old 12-03-2007, 08:19 AM   #4
Peacedog
Guru
 
Registered: Sep 2003
Location: Danville, VA
Distribution: Slackware, Windows, FreeBSD, OpenBSD, Mac OS X
Posts: 5,292

Rep: Reputation: 167Reputation: 167
You're welcome, glad it's sorted.
Good luck. ;-)
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Synaptics Touchpad on Acer Travelmate 4400 crazylincoln Linux - Laptop and Netbook 1 05-28-2009 01:10 AM
Laptop test result - Acer Aspire 5050 on 2 distros arif_moin Linux - Hardware 2 11-25-2007 10:22 PM
ACPI on ACER ASPIRE 5050 HEELLLPPP! rodrikus Linux - Newbie 2 11-20-2007 08:07 AM
Sabayon & Acer Aspire 5050 arif_moin Linux - Newbie 1 11-15-2007 09:42 AM
Sound issues with Acer Aspire 5050 running Ubuntu veritasequitas Linux - Laptop and Netbook 3 06-10-2007 06:12 PM


All times are GMT -5. The time now is 09:46 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration