Member
Registered: Sep 2003
Location: NC
Distribution: SuSe 9.3 Pro
Posts: 34
Rep:
|
SUSE 9.2 and Creative Labs
I purchased and installed a SoundBlaster Audigy 2 PCI card in my computer hoping to get some better sound.
I am running SUSE9.2 x86_64
uname -r = 2.6.8-24.17-default
I have disabled the onboard sound in the BIOS, and the card is working in XP
Here is some additional info...
linux:~ # lsmod
Module Size Used by
snd 67336 0
raw 73376 0
udf 82952 0
emu10k1 79108 0
sound 91080 1 emu10k1
ac97_codec 20504 1 emu10k1
snd_page_alloc 11664 0
soundcore 10912 3 snd,emu10k1,sound
floppy 63728 0
parport_pc 41024 1
lp 12264 0
parport 45068 2 parport_pc,lp
edd 11344 0
freq_table 5000 0
thermal 20236 0
processor 29628 1 thermal
fan 6024 0
button 9760 0
battery 12680 0
ac 7176 0
ipt_TOS 2944 14
ip6t_LOG 7168 17
ip6t_limit 2816 17
ipt_LOG 7680 30
ipt_limit 2816 30
ipt_pkttype 2048 2
af_packet 23692 2
ip6t_state 2304 21
ip6_conntrack 43744 1 ip6t_state
ipt_state 2432 27
ip6t_REJECT 7936 3
ipt_REJECT 7680 3
iptable_mangle 3456 1
iptable_filter 3584 1
ip6table_mangle 3200 0
ip_nat_ftp 6096 0
iptable_nat 25804 1 ip_nat_ftp
ip_conntrack_ftp 73712 1 ip_nat_ftp
ip_conntrack 49056 4 ipt_state,ip_nat_ftp,iptable_nat,ip_conntrack_ftp
ip_tables 18944 9 ipt_TOS,ipt_LOG,ipt_limit,ipt_pkttype,ipt_state,ipt_REJECT,iptable_mangle,iptable_filter,iptable_nat
ip6table_filter 3328 1
ip6_tables 20112 6 ip6t_LOG,ip6t_limit,ip6t_state,ip6t_REJECT,ip6table_mangle,ip6table_filter
ipv6 264224 15 ip6_conntrack,ip6t_REJECT
usbhid 43908 0
ftdi_sio 34948 0
usbserial 32240 1 ftdi_sio
evdev 10752 0
joydev 11264 0
sg 40248 0
st 40612 0
sr_mod 18084 0
ehci_hcd 30852 0
uhci_hcd 31776 0
subfs 8960 3
nls_utf8 2560 3
ntfs 90496 3
dm_mod 58840 0
usbcore 122368 7 usbhid,ftdi_sio,usbserial,ehci_hcd,uhci_hcd
sk98lin 175988 1
reiserfs 244976 1
sata_via 8836 4
sata_promise 11268 0
libata 46856 2 sata_via,sata_promise
sd_mod 18072 6
scsi_mod 130432 6 sg,st,sr_mod,sata_promise,libata,sd_mod
linux:~ #
linux:~ # lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
0000:00:0c.0 Multimedia audio controller: Creative Labs: Unknown device 0008
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
linux:~ #
inux:~ # lspci -v
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 80a3
Flags: bus master, 66Mhz, medium devsel, latency 8
Memory at f8000000 (32-bit, prefetchable)
Capabilities: [80] AGP version 3.5
Capabilities: [c0] #08 [0060]
Capabilities: [68] Power Management version 2
Capabilities: [58] #08 [8001]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f5700000-f78fffff
Prefetchable memory behind bridge: e5600000-f55fffff
Capabilities: [80] Power Management version 2
0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
Subsystem: Asustek Computer, Inc.: Unknown device 811a
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 169
Memory at f7e00000 (32-bit, non-prefetchable) [size=f7d00000]
I/O ports at cc00 [size=256]
Expansion ROM at 00020000 [disabled]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
0000:00:0c.0 Multimedia audio controller: Creative Labs: Unknown device 0008
Subsystem: Creative Labs: Unknown device 1001
Flags: bus master, medium devsel, latency 64, IRQ 169
I/O ports at dc00
Capabilities: [dc] Power Management version 2
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 177
I/O ports at e800
I/O ports at e400 [size=4]
I/O ports at e000 [size=8]
I/O ports at d800 [size=4]
I/O ports at d400 [size=16]
I/O ports at d000 [size=256]
Capabilities: [c0] Power Management version 2
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 32, IRQ 177
I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 185
I/O ports at ec00 [size=32]
Capabilities: [80] Power Management version 2
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 185
I/O ports at c000 [size=32]
Capabilities: [80] Power Management version 2
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 185
I/O ports at c400 [size=32]
Capabilities: [80] Power Management version 2
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 185
I/O ports at c800 [size=32]
Capabilities: [80] Power Management version 2
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 64, IRQ 185
Memory at f7f00000 (32-bit, non-prefetchable)
Capabilities: [80] Power Management version 2
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South] Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] #08 [2101]
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 80cf
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 193
Memory at f6000000 (32-bit, non-prefetchable) [size=f7800000]
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 00020000 [disabled]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
linux:~ #
linux:~ # /sbin/lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
0000:00:0c.0 Multimedia audio controller: Creative Labs: Unknown device 0008
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
linux:~ #
This is the error I get in YAST
An error occurred during the installation of
SB Audigy
The kernal module snd-emu10k1 for sound support
could not be loaded. This can be caused by incorrect
module parameters, including invalid IO or IRQ parameters.
I'm considering re-installing 9.2 if no one can help.
Thanks.
|