still need help with cd's
sys= 1.7ghz, 512m ram, 120g /dev/hda, 160g /dev/hdb
/dev/hdc cd/dvd-rw /dev/hdd cd/dvd-rw
MDK 10.1 KDE 3.2
I can write to either cd/dvd-rw but can not read either.
(cd's, I haven't tried dvd's yet)
The error for both is:
[root@localhost cd]# mount /mnt/cd
mount: block device /dev/hdd is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/hdd,
or too many mounted file systems
[root@localhost cd]# mount /mnt/dvd
mount: block device /dev/hdc is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/hdc,
or too many mounted file systems
/etc/fstab:
/dev/hda5 / ext3 defaults 1 1
none /dev/pts devpts mode=0620 0 0
/dev/hdb5 /mnt/ark ext3 defaults 1 2
/dev/hdd /mnt/cd iso9660 default,noauto,user,exec 0 0
/dev/hdc /mnt/dvd iso9660 default,noauto,exec 0 0
none /mnt/floppy supermount dev=/dev/fd0,fs=ext2:vfat,--,umask=0,iocharset=iso8859-1,sync,codepage=850 0 0
/dev/hdb3 /mnt/gentoo ext3 defaults 1 2
none /proc proc defaults 0 0
/dev/hda1 swap swap defaults 0 0
Below is part of 'dmesg'
Any help appreciated.
dlw
Probing IDE interface ide0...
hda: Maxtor 6Y160P0, ATA DISK drive
hdb: WDC WD1200JB-00FUA0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: IRQ probe failed (0xffffbffa)
hdc: IRQ probe failed (0xffffbffa)
hdc: GENERIC DVD DUAL 4XMax, ATAPI CD/DVD-ROM drive
hdc: IRQ probe failed (0xffffbffa)
hdd: IRQ probe failed (0xffffbffa)
hdd: IRQ probe failed (0xffffbffa)
hdd: Memorex 40MAXX 1248AJ, ATAPI CD/DVD-ROM drive
hdd: IRQ probe failed (0xffffbffa)
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
hdb: max request size: 1024KiB
hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 > p3
|