| g33sp0t |
04-06-2004 11:02 PM |
Soundcard issues opl3-sa3 on fedora core 1 kernil-2.6.4
I have a ISA Yamaha OPL3-SA3 Soundcard
I have ISA and PNP support, as well as oss ->yamaha opl3-sa2/sa3 Compiled.
I am reletivly new to Linux
Here is my dmesg and kudzu -p
Code:
[root@localhost root]# dmesg
Linux version 2.6.4 (root@localhost.localdomain) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #1 Sun Mar 28 21:24:07 PST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bff0800 (ACPI NVS)
BIOS-e820: 000000000bff0800 - 000000000c000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
191MB LOWMEM available.
On node 0 totalpages: 49136
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 45040 pages, LIFO batch:10
HighMem zone: 0 pages, LIFO batch:1
DMI 2.1 present.
ACPI: RSDP (v000 FIC ) @ 0x000f8070
ACPI: RSDT (v001 FIC VA503P 0x42302e31 AWRD 0x00000000) @ 0x0bff0800
ACPI: FADT (v001 FIC VA503P 0x42302e31 AWRD 0x00000000) @ 0x0bff0840
ACPI: DSDT (v001 FIC AWRDACPI 0x00001000 MSFT 0x01000004) @ 0x00000000
Built 1 zonelists
Kernel command line: ro root=/dev/hda2
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 551.461 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 190764k/196544k available (2042k kernel code, 5140k reserved, 641k data, 332k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1085.44 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 008021bf c08029bf 00000000 00000000
CPU: After vendor identify, caps: 008021bf c08029bf 00000000 00000000
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 256K (32 bytes/line)
CPU: After all inits, caps: 008021bf c08029bf 00000000 00000002
CPU: AMD-K6(tm)-III Processor stepping 00
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbfa0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfc8, dseg 0xf0000
pnp: 00:0b: ioport range 0x208-0x20f has been reserved
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: 0000:00:07.3: class 604 doesn't match header type 00. Ignoring class.
PCI: Using IRQ router VIA [1106/0586] at 0000:00:07.0
Installing knfsd (copyright (C) 1996 okir(AT)monad.swb.de).
udf: registering filesystem
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: Card 'OPL3-SA3 Sound Board'
isapnp: 1 Plug & Play card detected total
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
parport0: PC-style at 0x378 [PCSPP(,...)]
lp0: using parport0 (polling).
Using anticipatory io scheduler
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
PCI: Assigned IRQ 5 for device 0000:00:08.0
eth0: RealTek RTL8139 at 0xcc800000, 00:40:05:80:39:5b, IRQ 5
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: Maxtor 91366U4, ATA DISK drive
hdb: Hewlett-Packard CD-Writer Plus 8200a, ATAPI CD/DVD-ROM drive
hdc: 36X CD-ROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 26588016 sectors (13613 MB) w/2048KiB Cache, CHS=26377/16/63
hda: hda1 hda2 hda3
hdb: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: GenPS/2 Genius Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
pnp: Device 01:01.00 activated.
opl3sa2: Chipset version = 0x4
opl3sa2: Found OPL3-SA3 (YMF715E or YMF719E)
opl3sa2: 1 PnP card(s) found.
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
ad1848: No ISAPnP cards found, trying standard ones...
Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:41:49 2004 UTC).
can't register device seq
ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
ip_conntrack version 2.1 (1535 buckets, 12280 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http(deleted due to ganky forum)
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 229102
ext3_orphan_cleanup: deleting unreferenced inode 213470
ext3_orphan_cleanup: deleting unreferenced inode 213469
ext3_orphan_cleanup: deleting unreferenced inode 213421
EXT3-fs: hda2: 4 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 332k freed
EXT3 FS on hda2, internal journal
Adding 385552k swap on /dev/hda3. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
cdrom: This disc doesn't have any tracks I recognize!
!/i cut out the in and out as well as eth0 (security issues)/
[root@localhost root]# kudzu -p
-
class: OTHER
bus: PCI
detached: 0
driver: agpgart
desc: "VIA Technologies|VT82C598 [Apollo MVP3]"
vendorId: 1106
deviceId: 0598
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcibus: 0
pcidev: 0
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
driver: ignore
desc: "VIA Technologies|VT82C598/694x [Apollo MVP3/Pro133x AGP]"
vendorId: 1106
deviceId: 8598
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcibus: 0
pcidev: 1
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
driver: ignore
desc: "VIA Technologies|VT82C586/A/B PCI-to-ISA [Apollo VP]"
vendorId: 1106
deviceId: 0586
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcibus: 0
pcidev: 7
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
driver: ignore
desc: "VIA Technologies|VT82C586B ACPI"
vendorId: 1106
deviceId: 3040
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcibus: 0
pcidev: 7
pcifn: 3
-
class: NETWORK
bus: PCI
detached: 0
device: eth0
driver: 8139too
desc: "D-Link System Inc|RTL8139 Ethernet"
vendorId: 1186
deviceId: 1300
subVendorId: 1186
subDeviceId: 1301
pciType: 1
pcibus: 0
pcidev: 8
pcifn: 0
-
class: MOUSE
bus: PSAUX
detached: 0
device: psaux
driver: msintellips/2
desc: "Generic PS/2 Wheel Mouse"
-
class: CDROM
bus: IDE
detached: 0
device: hdb
driver: ignore
desc: "Hewlett-Packard CD-Writer Plus 8200a"
-
class: CDROM
bus: IDE
detached: 0
device: hdc
driver: ignore
desc: "36X CD-ROM"
-
class: VIDEO
bus: PCI
detached: 0
driver: Card:RIVA TNT2
desc: "nVidia Corporation|NV6 [Vanta/Vanta LT]"
vendorId: 10de
deviceId: 002c
subVendorId: 10de
subDeviceId: 001c
pciType: 1
pcibus: 1
pcidev: 0
pcifn: 0
-
class: HD
bus: IDE
detached: 0
device: hda
driver: ignore
desc: "Maxtor 91366U4"
physical: 16383/16/63
logical: 26377/16/63
-
class: IDE
bus: PCI
detached: 0
driver: ignore
desc: "VIA Technologies|VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE"
vendorId: 1106
deviceId: 0571
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcibus: 0
pcidev: 7
pcifn: 1
[root@localhost root]#
As we can clearly see,
isapnp: Scanning for PnP cards...
isapnp: Card 'OPL3-SA3 Sound Board'
isapnp: 1 Plug & Play card detected total
Yet Kudzu does not reflect this.
and redhat-config-soundcard Returns "No soundcards were detected"
Any help folks>? Thanks ahead of time.
I have spent the last few days reading up on this. I dont think it has to do with kernil options , i.e. isa=bios And after struggling to grasp kernil compile/recompile/instillation methods, i assure you, my drivers are compiled, as well as everything else needed for my particular hardware, guys, i think i learned the hardest way possable, through alot of failure. ALOT
Thanks!, |
