![]() |
Sound latency too high
Hello!
I've got a strange sound-problem under Redhat 9.0 (on an MSI K7 T Turbo Mainboard with VIA VT82C686B onboard sound) that i don't understand. First of all, I have sound in xmms, mplayer, xawtv etc., without problems. But if I use a game with "live" sound effects, like lbreakout2, there is a latency of more than one second between the action and the sound! If i start doom, the sound is also cutted very hard. First I thought that this might be a problem of my sound drivers, so i switched from oss to alsa, then i changed my selfmade alsa drivers to the ones supported by via, but the result always was the same! (and, although i am a newbie, i assured that i used different drivers!) I modified buffer sizes in the control panel, too, without any results. Is it possible that this is an IRQ conflict? I am not sure about what dmesg says - i cut some parts to show: PCI: Found IRQ 11 for device 00:07.2 IRQ routing conflict for 00:07.2, have irq 9, want irq 11 IRQ routing conflict for 00:07.3, have irq 9, want irq 11 PCI: Sharing IRQ 11 with 00:0a.0 PCI: Sharing IRQ 11 with 00:0a.1 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:07.3 IRQ routing conflict for 00:07.2, have irq 9, want irq 11 IRQ routing conflict for 00:07.3, have irq 9, want irq 11 PCI: Sharing IRQ 11 with 00:0a.0 PCI: Sharing IRQ 11 with 00:0a.1 ... PCI: Found IRQ 10 for device 00:0c.0 divert: allocating divert_blk for eth0 eth0: Davicom DM9102 at pci00:0c.0, 00:80:ad:79:39:6f, irq 10. PCI: Assigned IRQ 11 for device 00:07.5 ac97_codec: AC97 Audio codec, id: ICE17 (ICE1232) via_ac97_init: Not Turn on SPDIF:spdif=0,ExtReg=201 viaudio: board(VT3068) #1 at 0xDC00, IRQ 11 ... via_audio: ignoring drain playback error -11 via_audio: ignoring drain playback error -11 lspci tells me the following about my sound chip: 00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) Subsystem: Micro-Star International Co., Ltd.: Unknown device 3300 Flags: medium devsel, IRQ 11 I/O ports at dc00 [size=256] I/O ports at e000 [size=4] I/O ports at e400 [size=4] Capabilities: [c0] Power Management version 2 Does anyone have an idea about whats going wrong here? I don't have any anymore... Thank you very much! |
| All times are GMT -5. The time now is 08:52 AM. |