debian:/home/unni# lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation Unknown device 03d0 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

debian:/home/unni# cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 95
model name      : AMD Athlon(tm) 64 Processor 3200+
stepping        : 2
cpu MHz         : 2009.103
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni cx16 lahf_lm svm cr8legacy ts fid vid ttp tm stc
bogomips        : 4022.18

Linux version 2.6.18-4-k7 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 17:57:15 UTC 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000037fc0000 (usable)
 BIOS-e820: 0000000037fc0000 - 0000000037fce000 (ACPI data)
 BIOS-e820: 0000000037fce000 - 0000000037ff0000 (ACPI NVS)
 BIOS-e820: 0000000037ff0000 - 0000000038000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
895MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 229312
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225216 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v002 ACPIAM                                ) @ 0x000fb810
ACPI: XSDT (v001 A_M_I_ OEMXSDT  0x05000701 MSFT 0x00000097) @ 0x37fc0100
ACPI: FADT (v003 A_M_I_ OEMFACP  0x05000701 MSFT 0x00000097) @ 0x37fc0290
ACPI: MADT (v001 A_M_I_ OEMAPIC  0x05000701 MSFT 0x00000097) @ 0x37fc0390
ACPI: MCFG (v001 A_M_I_ OEMMCFG  0x05000701 MSFT 0x00000097) @ 0x37fc0400
ACPI: OEMB (v001 A_M_I_ AMI_OEM  0x05000701 MSFT 0x00000097) @ 0x37fce040
ACPI: HPET (v001 A_M_I_ OEMHPET0 0x05000701 MSFT 0x00000097) @ 0x37fc6bb0
ACPI: DSDT (v001  A0785 A0785000 0x00000000 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: Skipping IOAPIC probe due to 'noapic' option.
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: TEMPLATE Product ID: SE           APIC at: 0xFEE00000
I/O APIC #1 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 40000000 (gap: 38000000:c6c00000)
Detected 2009.160 MHz processor.
Built 1 zonelists.  Total pages: 229312
Kernel command line: root=/dev/sda7 ro noapic pci=routeirq
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 901660k/917248k available (1557k kernel code, 15076k reserved, 581k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Using HPET for base-timer
Calibrating delay using timer specific routine.. 4022.08 BogoMIPS (lpj=8044162)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d
CPU: After vendor identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 8c00)
CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
Total of 1 processors activated (4022.08 BogoMIPS).
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4406k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:0d.0
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
ACPI: PCI Interrupt Link [LSA1] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:01.1[A] -> Link [LSMB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [LAZA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 15 (level, low) -> IRQ 15
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LMC9] -> GSI 11 (level, low) -> IRQ 11
pnp: 00:0c: ioport range 0x230-0x23f has been reserved
pnp: 00:0c: ioport range 0x290-0x29f has been reserved
pnp: 00:0c: ioport range 0xa00-0xa0f has been reserved
pnp: 00:0c: ioport range 0xa10-0xa1f has been reserved
PCI: Bridge: 0000:00:04.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1195217177.732:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:09.0 to 64
pcie_portdrv_probe->Dev[03e8:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[03e9:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[03e9:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
NFORCE-MCP61: chipset revision 162
NFORCE-MCP61: not 100% native mode: will probe irqs later
NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
SCSI subsystem initialized
libata version 2.00 loaded.
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 10, io mem 0xdfffec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 11, io mem 0xdffff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:07.0 to 64
forcedeth: using HIGHDMA
0000:00:07.0: Invalid Mac address detected: 7f:a6:ab:fc:1b:00
Please complain to your hardware vendor. Switching to a random MAC.
eth0: forcedeth.c: subsystem: 01043:8234 bound to 0000:00:07.0
sata_nv 0000:00:08.0: version 2.0
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 15 (level, low) -> IRQ 15
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xD880 irq 15
ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 15
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 156312576 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI, max UDMA/100
ata2.00: configured for UDMA/100
  Vendor: ATA       Model: WDC WD800BD-08MR  Rev: 10.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: TSSTcorp  Model: CDDVDW SH-S203B   Rev: SB00
  Type:   CD-ROM                             ANSI SCSI revision: 05
SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: Attached scsi disk sda
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: PC Speaker as /class/input/input1
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Adding 489940k swap on /dev/sda5.  Priority:-1 extents:1 across:489940k
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
ts: Compaq touchscreen protocol output
EXT3 FS on sda7, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth12: no link during initialization.
ADDRCONF(NETDEV_UP): eth12: link is not ready
cdrom: sr0: mrw address space DMA selected
cdrom: sr0: mrw address space DMA selected
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A