LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   SmartLink Linmodem problem (https://www.linuxquestions.org/questions/linux-hardware-18/smartlink-linmodem-problem-39906/)

ugenn 12-31-2002 01:48 PM
SmartLink Linmodem problem
 
I just d/l and compiled drivers for my SmartLink 56K software
Faxmodem but now the modem is only able to dial once.
After hanging up on the first dial, the modem will refuse to dial
again. Even manually sending modem commands (eg echo ATH >
/dev/modem) to the device file can't be done. Has anyone
experienced something similar?

rshaw 12-31-2002 01:57 PM
send it an ATZ, then dial. if that worked then make ATZ the first init string.

ugenn 12-31-2002 11:59 PM
Quote:
Originally posted by rshaw
send it an ATZ, then dial. if that worked then make ATZ the first init string.
The thing is, I can't. Any I/O to the device file would "block" after
the initial hangup.

juby 01-02-2003 04:39 AM
i blv the prob will be with the irq settings of ur system,.. if possible try plugging in the card onto slot1 PCI and then running the installation once again.. certain modems dont like being put on slot 3.. its just a try .. mine PCtel got working by changing the slot.. hope this helps

ugenn 01-02-2003 06:42 AM
Quote:
Originally posted by juby
i blv the prob will be with the irq settings of ur system,.. if possible try plugging in the card onto slot1 PCI and then running the installation once again.. certain modems dont like being put on slot 3.. its just a try .. mine PCtel got working by changing the slot.. hope this helps
It's a laptop...


All times are GMT -5. The time now is 04:17 AM.