Giving your distribution and version number is usually always helpful. You can put it into your profile or signature and not have to remember to post it all the time.
Here are some articles I posted in the tips thread
# Compiling kernel modules
You will need to have installed:
1. The developmental packages (compiler)
2. The kernel source code that matches your running kernel
3. The module source or install code
Check out your system and see what's under the hood and see if you installed the stuff you need to do the job. Open an x terminal and type in this sequence of commands to see what kernel we are running and see if you have the kernel source installed:
Code:
[phil@uilleann phil]$ su -
Password:
[root@uilleann root]# uname -r
2.4.18-3
I am running kernel version 2.4.18-3. Do I have the proper source code?
Code:
[root@uilleann root]# cd /usr/src
[root@uilleann src]# ls -alc
total 3
drwxr-xr-x 4 root root 136 Jun 12 14:53 .
drwxr-xr-x 16 root root 424 Jun 4 12:04 ..
lrwxrwxrwx 1 root root 14 Jun 4 12:11 linux-2.4 -> linux-2.4.18-3
drwxr-xr-x 16 root root 584 Jun 4 12:11 linux-2.4.18-3
drwxr-xr-x 7 root root 168 Jun 4 12:08 redhat
[root@uilleann src]#
I do have the same kernel version source code installed in the directory /usr/src/linux-2.4.18-3 and there is a symbolic link named linux-2.4 pointing to it.
If you don't see something similiar to this (but in color), you will need to install the kernel source.
NOTE: I noticed that Red Hat didn't make the symbolic link
/usr/src/linux that all of the INSTALL files that I have read mentioned that I need, so I may as well make one now to save editing the files in the source code to install.So, I'll make it just now:
Code:
[root@uilleann src]# ln -s linux-2.4.18-3 linux
[root@uilleann src]# ls -alc
total 3
drwxr-xr-x 4 root root 160 Jun 12 15:46 .
drwxr-xr-x 16 root root 424 Jun 4 12:04 ..
lrwxrwxrwx 1 root root 14 Jun 12 15:46 linux -> linux-2.4.18-3
lrwxrwxrwx 1 root root 14 Jun 4 12:11 linux-2.4 -> linux-2.4.18-3
drwxr-xr-x 16 root root 584 Jun 4 12:11 linux-2.4.18-3
drwxr-xr-x 7 root root 168 Jun 4 12:08 redhat
[root@uilleann src]#
Ah, there it is, so that's done.
Next, did I install the compiler?
Code:
[root@uilleann src]# gcc -v
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/2.96/specs
gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-113)
[root@uilleann src]#
Yes, I have a compiler installed.
If you don't have those two things installed, you have to install them first off your install CD.
If they are installed, download the source and happy comiling.
Make sure you carefully read the README and INSTALL files after extracting and before compiling/installing.
# Guides to software and installation and uninstallation
LNAG - How do I install a program I downloaded from the Internet?
Rute Guide's software explanation
You might want to check out
CheckInstall to manage source code installations/uninstallation
# Modem and connection troubleshooting
Modem NHFs
Modem HOWTO
Linmodems.org
Conexant/Rockwell modem HOWTO
The Unofficial PCTel Linux Driver page
I finaly got my PcTel hsp56 mr modem to work
Linux driver for Winmodems with Lucent Apollo (ISA) and Mars (PCI) chipsets
Lucent AMR modem listed as an Intel AC'97 - Smart Link Modems
The kppp Handbook
Dial-up Networking Configuration Using KDE's Kppp
Troubleshooting ISP Connection Problems
Connecting to AOL with Linux
